Monitoring Report Form H10 August 2017 Margot Buyens amp Jim Moore This presentation covers Filing Form H10 online Filing hard copy Form H10 Violations and rejected Forms H10 H10 related issues and problems ID: 752302
Download Presentation The PPT/PDF document "Annual Disposal / Injection Well" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Annual Disposal / Injection Well
Monitoring Report (Form H-10)
August 2017
Margot Buyens & Jim MooreSlide2
This presentation covers:
Filing Form H-10 online.
Filing hard copy Form H-10.
Violations and rejected Forms H-10.
H-10 related issues and problems.
Transfers and inactive well issues.
H-10 Query information.Slide3Slide4
Who has to file a Form H-10?
File Form H-10 if:
well is on proration schedule as injection well.
there is an injection permit but well is not on proration schedule and not completed.
Note: A well can have an injection permit but is on the proration schedule as a producer.
This is when you file a Form W-10 or G-10.Slide5
Notification
The operator is notified via mail 3 months before the Form H-10 due date.
Example:
Cycle year starts 01/2015 and ends 12/2015.
Due date of the Form H-10 is 02/01/2016.
Notification is mailed to operator 10/21/2015. Slide6
Online filing advantages
expedites the process
RRC receives it immediately
can be filed 24/7
error messages
violations showing online
Note: Hard copy filing is still accepted.Slide7
Getting startedSlide8
Log in to online systemSlide9Slide10Slide11Slide12Slide13Slide14Slide15Slide16
Pressures – item #13
report average and maximum pressures
for vacuum pressures, enter zerosSlide17
Volumes – item #14
report amount of BBLS/liquid or MCF/gas
inactive wells, enter zero each monthSlide18
Annulus pressures – item #15
pressure between tubing and casing (TCAM)
Item #15 – complete 3 columns
required only if TCAM special condition on UIC permitSlide19
Injection interval – item #16
Enter the completed interval, not the permitted interval.
In some cases, the completed injection interval can be the same as the permitted interval.Slide20
Tubing packer depth – item #17
Enter completed packer setting depth, not permitted packer depth.
In some cases, the completed packer setting depth can be the same as the permitted packer depth.
Some permits have packer exceptions, obtained via permit application process. Slide21
Sources of injected fluids– item #18
Report the source of the injection / disposal fluids.
Are the injected fluids from other sources than your own? If so, enter “yes”.Slide22
Injection tubing / casing – item #19
Checkmark box for tubing or casing.
If injecting through casing, tubing packer exception needed, obtained via permitting process.Slide23
Injected fluid types– item #20
Reported liquid / gas must equal 100%.
Enter numbers, no check marks.
If no injection during the reported cycle year, leave item 20 blank.Slide24
Injected fluid types – item #20
File online: use drop down arrow to view additional fluids.
File hard copy: use “other” and specify. Slide25
System error message will not allow you to submit H-10.
Find red triangle and correct. Click “process”.Slide26Slide27
Print Form H-10 after filingSlide28
Hard copy Form H-10 filing
Form is outsourced, 5 – 6 days turnaround.
Time sensitive
, affects
severances / seals.
Enforcement continues even if form is received.
Outdated forms are rejected and not entered.
Use pre-populated form posted online.Slide29
Find Form H-10
How to find pre-populated Form H-10 at the RRC website.Slide30Slide31
H-10 QuerySlide32Slide33Slide34
Violations / rejects
System checks for violations and rejections.
System may place them in queue for review.
Violation notification is mailed to operator.
If no response within 30 days, certified letter is mailed to operator.
If not resolved in 30 days, automatic severance / seal is issued.
To lift severance / seal, resolve violation and pay $750 reconnect fee.Slide35
Finding Violations using the H-10 Query.Slide36Slide37
Internal and external violations. Check violation status.Slide38
Send hard copy corrections via mail or email to
h10info@rrc.texas.gov
Contact H-10 Department to resolve violation if needed.
Contact H-10 Department if permit amendment needed to resolve violation.Slide39
60 Day violation hold is implemented pending preparation of permit amendment.
Hold is removed if amendment application is not received within 60 days.
Violation hold is removed when permit is amended. Slide40
Make correction on a filed H-10.Slide41Slide42
Instructions for correcting H-10.
Go to: File H-10.
Scroll down to the bottom of the page.
Enter UIC#, no preceding zeros.
Enter H-10 due date, month and year only, no slash or dash.
Click “Search”.
Click File at end of the line.
Make correction.
Submit corrected H-10.Slide43
Form H-10 not set up online?
Please contact the H-10 department. Tel: 512-463-2903 or
h10info@rrc.texas.gov
Online Forms H-10 can be set up quickly.
Slide44
Transfers
Partial H-10 can not be filed.
Well transfers in the middle of H-10 cycle year, new operator files H-10.
UIC permits (wells not drilled) have no lease #. Application can be submitted by new operator to obtain permit.
Slide45
Inactive well problems?
Please contact the H-10 department. Tel: 512-463-2903 or
h10info@rrc.texas.gov
Injection well on the W10 (producing) schedule, will be corrected.
W2/G1 (active injection) may be required to bring well in compliance.
W2/G1 (well record only) may be required for well to become active (HB 2259 P5 Dep).
Slide46
What else can I find on the H-10 Query?
Slide47
Contact information
H-10 department:
Tel: 512-463-2903
h10info@rrc.texas.gov