/
retention.sil & TiSi.snap retention.sil & TiSi.snap

retention.sil & TiSi.snap - PDF document

blindnessinfluenced
blindnessinfluenced . @blindnessinfluenced
Follow
353 views
Uploaded On 2020-11-20

retention.sil & TiSi.snap - PPT Presentation

bredent medical GmbH Weissenhorner Str 2 89250 Senden GermanyTelwwwbredentmedicalcomMistake and subject to change reserved 000710GB20140210 520 0100 4 Special Silicon TrimmerSKYDR 41 1 mm ID: 820593

retention sil tisi snap sil retention snap tisi denture ref rts newton580 abutment silicone xation dentures levels eat abutments

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "retention.sil & TiSi.snap" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

retention.sil & TiSi.snapbredent medica
retention.sil & TiSi.snapbredent medical GmbH Weissenhorner Str. 2 | 89250 Senden | GermanyTel.www.bredent-medical.comMistake and subject to change reserved 000710GB-20140210520 0100 4Special Silicon TrimmerSKY-DR 411 mm3,8 mmREF TISI0Y313 mmREF TISI0Y53TiSi.snap 5/3REF TISIAY17REF TISIAY35retention.sil & TiSi.snap Order information1 mm6 mmREF TISI0Y51Convenient, reliable and inexpensive xation of dentures1,5 mm3,0 mm0,5 mm3,0 mm6 mmulary suitable for dentures with slender designs. In such cases, retention.sil is integrated into the denture from the plants. As a result, perfect control of the denture during removal and integration is ensured and tilting is avoidan angle to make optimum use of the local bone. Thanks to the use of angled abutments on implants with oblique can be raised up to almost 2 kg for each part for 10° to 20° DesignationShore hardnessPull-off forcesREFretention.sil 20025 SH 200 g / 2 Newton580 RTS 25retention.sil 40050 SH400 g / 4 Newton580 RTS 50retention.sil 60065 SH600 g / 6 Newton580 RTS 65retention.silretention.sil & TiSi.snap retention.sil 400retention.sil 600retention.sil 20040°30°22,5°12,5°5°-5°30°-40°23°-12°+5°- -5°35°17,5°0°10,00retention.sil & TiSi.snap Diff

erent retention levels through different
erent retention levels through different pull-off forcesin gramsWith each of the three angles, 10 ° divergence can be compensated. Toothless old people often have big problems with their can not eat fresh solid food any longer. However, they shy Moreover, the various heights allow to adapt the space rethe pull-off forces but they were still in the range indicatMoreover, it was found that pressure, storage in water and Based on the results of this study, we recommend the folsurgery, to avoid uncontrolled stressprovide adequate xation of the denture any longer. an extent that patients were able to eat and laugh again snap abutment is adjusted by selecting one of the three retention levels cation of the primer, retention.sil with with the silicone cutter.The fastest and most economical solution for full The position of the TiSi.snap abutment is located After the cavity was conditioned with Multi-Sil liqsil on TiSi.snap abutments. The patient closes his mouth and the denture (3 minutes) is xed under After 3 min, the denture is removed and excess retention.sil is removed with the silicone cutter.It is available in the set in three different retention The TiSi.snap abutment is not subject to wear and can be cleaned easily by the patient without any