1ountingTheinstructions here apply theSonyHAWSIBU 2U formfactormodelCautionsDo not liftormove theHAWSIBUunit by thehandles ontheearbrackets infrontHold thesystemitselfDo notinstall theHAWSIBUunit into ID: 863436
Download Pdf The PPT/PDF document "SIBURackInstallationGuideVersion10" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 SIBURackInstallationGuideVersion1.0 1
SIBURackInstallationGuideVersion1.0 1 ountingTheinstructions here apply theSonyHAWSIBU 2U formfactormodel.CautionsDo not liftormove theHAWSIBUunit by thehandles ontheearbrackets infront.Hold thesystemitself.Do notinstall theHAWSIBUunit intorackwithoutrailssupportthesystem.Onlyqualifiedtechnicianwhofamiliarwiththeinstallationprocedureshouldmount andinstalltheHAWSIBUunit.Mount the railsto the rackusing the appropriatescrewsandflangenuts,fullytightened,eachendoftherail.Do not loadthe railsunless they are installed withscrewsinstructed.TherailsavailablefortheHAWSIBUunit are designedtosafe
2 lysupportthat HAWSIBUunitwhenproperly in
lysupportthat HAWSIBUunitwhenproperly installed.Additionalloadingonthe railsis at thecustomer’srisk.Themountingrailswill supportyourHAWSIBUunit onlyinstalledinstructed.Do not installhard disk drivesthesystemuntil afterplacingthesystemin therack.TheHAWSIBUinstalls in 19” equipment rack. Pleaseexamine theillustrations inthissectionmakesureyouareusing thecorrecttyperack.In order to place the system in the rack, first attach the ear brackets to the front of the device.Theninstalltheslidingrailsystemtherack.Finallyplace thedeviceon theslidingrailsand securetherack. Use onlythescrewsf
3 astenersincludedwiththeshipmentof thesli
astenersincludedwiththeshipmentof theslidingrailsystemThisprocedure is described and illustrated in the sections that follow below. 2 Theinstructions hereapply theHAWSIBU.CautionsDo not populateany unit with hard drivesuntil ithasbeensecurelyinstalledin therack.At least two persons are required to safely lift, place, andattachtheHAWSIBUunitintoracksystem.Do not lift or move the HAWSIBUunit by the handles, powersuppliesorthe controllerunits.Hold thesystemitself.Do notinstall theHAWSIBUunitinto rackwithoutrailssupportthesystem.Onlyqualifiedtechnicianwhofamiliarwiththeinstallationprocedu
4 reshouldmount andinstalltheHAWSIBUunit.M
reshouldmount andinstalltheHAWSIBUunit.Mount the railsto the rackusing the appropriatescrewsandflangenuts,fullytightened,eachendoftherail.Do not loadthe railsunless they are installed withscrewsinstructed.TherailsavailablefortheSonyHAWSIBUunit are designedsafelysupportthat SonyHAWSIBUunit when properly installed.Additionalloadingonthe railsis at thecustomer’srisk.Sonycannotguaranteethat themountingrailswill supportyourSonyHAWSIBUunitunlessyouinstalltheminstructed.TheHAWSIBUinstalls therackusing themountingrailsdesignedforthedevice enclosure.Themountingrailsandhardwarearesoldseparatel
5 y.Themountinghardwareshipmentincludesqui
y.Themountinghardwareshipmentincludesquickinstallationguide forinstallingthemountinghardware andplacingtheHAWSIBUin rack.PleaserefertheQuickStartGuideincluded withthemountingrails. 3 Note Pleasereferthe Quick Installation Guide included withthe mountingrailsformoredetailed rackinstallationinstructions.HAWSIBUwithrailbracketsandhandlesachedFollow the mounting rail instructions to attach the Rail brackets on each side of the enclosure,and thehandleson thefront.install theHAWSIBUintorackwiththesuppliedmountingrails:Check the fit of the mounting rails in your rack system.Adjustthelen
6 gththemountingrailsneeded.Installingther
gththemountingrailsneeded.Installingtherailsontotherack right side rail viewed from front left side rail viewed from front 4 Place enclosureintothemounting railsInsert the rail brackets attached to the enclosure into the rails.least twopersons are requiredsafelylift thesystem.Lift the enclosure itself. Do not lift the system by its brackets or handles. 5 SysteminstalledrackviewedfromrearSecuretheenclosure therack.The unit attaches to the rack posts using the included screws and flange nuts.Use the attaching screws and flange nuts that came with the HAWSIBUenclo