CTHR942205 SAP Certified Application Associate SAP SuccessFactors Time Management 1H2022 ID: 969889
Download Pdf The PPT/PDF document "C_THR94_2205 - SAP Certified Application..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Studies SAP Certified Application Associate - SAP SuccessFactors Time Management 1H/2022 Dumps Certification Get your required dump now: https://certsgot.com/product/dumps - c_thr94_2205 - sap - certified - application - associate - sap - successfactors - time - management - 1h - 2022/ Copy Paste The Above URL To Get The Dump Related Information o we’re going to have a data , and we’re going to have a voice . And you might wonder, how does that phone know which it belongs to as opposed to the PC? Well, the switch port is going to recognise that we have a Cisco IP phone attached, and using the Cisco Discovery Protocol, or , it’s going to inform the phone, “Hey, you belong to 400,” as an example. Now, is a Cisco - proprietary layer 2 discovery protocol. It shows us our two adjacencies. There’s an industry standard, and that industry standard is LDP, or a variant of that is LDP - Med. This is not going to work with LLDP Med. It’s only going to work with . So if you have a non - Cisco switch, or if you have a Cisco switch that’s not running on that port, then you’re probably not going to use a multi access port. And I mentioned that with the single , the frames looked a lot like dot - oneQ frames, except there was no . Well, here it looks kind of identical to adopting one Qframe, because we do have identification specifically in the voice . Now, remember the concept of a native . We said that a native does not have any tag bits added. It’s an untagged frame. Well, if we’re doing a multi - access port, the data is untagged. That’s essentially a native coming into this multi access port. But we do add those four extra bits to the voice, and we’re identifying it as belong ing to 400. But we’ve got that native on that switch port set to 300. That’s where the data frames are going to flow. And the third and final option that we have is a trunk port. After all, trunks have the built - in ability to carry traffic for multiple s . And that’s what we can do. We can have this trunk port that’s carrying traffic for both the voice and the data . In fact, it might be carrying traffic for other s as well. We’ll talk about that in just a moment. But remember how I mentioned that the mul ti access port was incompatible with LDP or the variant LLDP Med LDP? By the way, that stands for link. Layer. Discovery.Protocol. . That stands for the Cisco Discovery Protocol. Well, this is going to be compatible with either one. So if you’re using a th ird - party switch or a switch that does not support , this might be the way you want to go. And the frames here don’t just look like dot - one - Q frames; they actually are dot - one - Q frames. And just like with the multi - axis port, the data is untagged. That’s the native on this trunk connection going into that switchboard. The voice will have tags that say, “In this case, this voice frame belongs to 400.” But for security reasons, we may want to go in and prune things off. In other words, deny access to the trunk for any unnecessary s. We don’t want to take up extra bandwidth going over this trunk for traffic that has no need to be on this link. And we don’t want that PC on the data to go into promiscuous mode, where it can sniff the packets coming in from all s. That could be a security issue.