Follow us!Rev. 1/201825080 Prevalle (BS) - ItalyTel. +39 030 6461800Fa - PDF document

Follow us!Rev. 1/201825080 Prevalle (BS)
Follow us!Rev. 1/201825080 Prevalle (BS) - ItalyTel. +39 030 6461800Fax +39 030 6801897e-mail info@zato.itZato srlwww.zatoshredder.comCAYMANDEMOLITIONRECYCLINGABCTECHNICAL DATAFCE06RIIFCE10RIIFCE20RIIFCE30RIIFCE40RIIFCE50RIIFCE70RIIFCE90RIIWeight C - Reach Throat force Apex force at 380 barip force at 380 barExcavator weight 2nd Excavator weight 3rd ylinder recommended owRotation recommended owCAYMAN2 2 2 1 11 763 4 5 108 119 Technical data may be subject to change without prior notice and without any liability whatsoever by ZATO SRL.All Cayman series shears are cover

ed by a 12-month warranty.All models can
ed by a 12-month warranty.All models can be supplied without hydraulic rotationAll models are available with the option for demolition in deep sea water.The data in the chart does not include the adaptation connection plate.All data regarding excavator weight are approximate. Always refer to the loading diagrams on the excavators.MAIN FEATURES1 - COMPACT FRAME7 - ROTATION UNITcylinder is completely enclosed, ensuring complete protection againstexcessive banging and accidental are completely reinforced, made from the highest resistance steel (700MPa), with anti-wear steel sections (400H

BW) to cope with a range of stress and t
BW) to cope with a range of stress and torsion.The optional 360° rotation is driven by a hydraulic motor equipped with an anti-cavitation valve to protect the rotation motor and gear in case of shear torsion.2 - LARGE INSPECTION PANELS8 - CUTTING JAWEasy access to the main components inall maintenance areas.Large and optimised mobile jaw apex for excellent cutting operation and shear capacity.Robust and oversized with a very high bore to achieve exceptional cutting forces.The blades have threaded holes and can be removed quickly even when the jaw is locked or jammed.10 - MOVING JAW GUID

ING SYSTEMSolid, robust and super-resist
ING SYSTEMSolid, robust and super-resistant tothrusts. The protection angles arevery compact and allow for maximumvisibility during operation. Assembly and process to meet a perfect tolerance when inserted into the housing hole. Maximum reliability, resistance and the lowest machine downtime are obtained.Zato’s unique guide system overhangsthe moving jaw, increasing the stabilityoptimal position and less wear onThe result is a perfect alignment of themoving jaw with the frame.5 - BALL JOINT11 - FULLY PROTECTED CUTTING TIPcorrects pin alignment in any situation,even when the jaw is f

orced to twist.Bolt-on piercing tips enc
orced to twist.Bolt-on piercing tips encapsulate the and wear. Manufactured with a special internal blade seat to discharge heat and cutting 6 - REGENERATION VALVEcutting and cycle speed.The Cayman demolition shears manufactured by Zato are useddemolition and scrap recycling yards all over the world for more than 30 years. Zato’s shears ensure a very high performancesand an extraordinary level of eciency and reliabilityrange of models is very wide and goes from 600 kg up to 16 tons to cover all the requirements of the market.The Zato Cayman demolition shear develops the lighte

st possible weight, being manufactured w
st possible weight, being manufactured with the best high quality steels that provide structural strength, torsions resistance and wear durability. In this way both and maintenance are reduced. The specic geometry of each model of Cayman shear adds power to the forces developed by the large-bore, long-stroke cylinder, while cycle times are improved by the speed valve installed on all models. Properly prepared, the shear can be used to bundles and sheets, with extraordinary precision and high eciency.APPLICATIONSCivil and naval demolition Rail demolition Run-at demolitionC