HighEfficiency industrial fans 02 ADIALsingleinletfans ADIALoubleinletfansFanswithoutcasing pecialbuildprssurrsistantspecialbuildmultistage pecialbuildhotgasspecialbuildcustomized XIALVLNL mpell ID: 817652
Download Pdf The PPT/PDF document "Extreme conditions require maximum outpu..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Extreme conditions require maximum outpu
Extreme conditions require maximum output à we are by your side!High-Efficiency industrial fans02ADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagepecialbuildhotgas|specialbuildcustomizedXIALVL|NLmpellers|Serviceruwuhigh-efficiencyas unique as your requirement...chemical plants | pharmaceutical plants | climate control and ventilation | clean-room technology | building of dryers | wood industry | automotive | furnace industry | paper industry | steel industry | power stations | Food & Beverage industryOnly who provokes himself permanent, does not stop.Our challenge is your requirement to our products. Naturally we can offer standard fan to you. But this others can do also. However we only reachbest form if we may offer a special, perhaps even unique special solution Special materials, unusual drives, unusual coatings - no problem for us. We are the specialists for lot size of 1. Therefore we manufacture all fanparts themselves at our production location in beautiful Bavaria. Thus we are highly flexible and reliable.For more than 30-years our world-wide customers rely on our experience in the building of fans. Our products are used in a wide variety of industries.Whether automobile industry, building of furnaces, chemistry, pharma, evenProfit from this, too!04question of the efficiencyì¤ingle inlet fans2.5002.0001.5001.0005003.000Rda Pa1.5002.0003.5007.00010.00015.00020.00030.00040.00060.000V(m3/hx)VE3VE1VVVVM1SHN/VN2SVN1SVNNpressure fan with inlet vane control 02HNN/RU 500 R-S: Flue gas fan om 1.4571 with frequency converters03VE5/RU 100 R: Gas-tight high pressure fan for nuclear power station04 VNNex/RU 800kg: Low pressure 05 VNNex/RU 800kg GR30: Halar coated low pressure fan with 06/07 VN2S/RU 1600 R: Low pressure fan with belt drive 250KW for 04|05On single-suction, one-stage ruwuradial fans represent the emphasis ofour product portfolios. You tell us thedesired operating point and the medium data. From 9 standard seriesguarantees maintenance-free radial fans are characterised byAvailable pressure ranges: êMedium pressure rangeêHigh pressure range all 9 series are available with different800,000mêPressure differentials from 200 to 30,000PaHigh efficienciy up to 87%êFan housing in heavy welded reinforcement iron and profiles+49 82 71-81 75-99Fax: 5-40E-Mail: salesruwu.demfkrDirect drive withADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service06The fascination of a technology lies in the possibilities, which it opensouble inletfafans withoutcng01kDouble suction ruwufans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt driveêSpecial drive strands with housing positions acc. to Eurovent,êWide spread power limits from 2,000 to 1,200,000mFor operatings temperature ofêFor critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availablespeciality of ruwuare plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:êElastic couplingsAll series are available with differentêPower limits wide spreadêMaterial and cooling device êAvailable in the nominal ,000mmêAlso available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: salesruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftDirect drive ADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service08on highest levelì¤ressure resistantlbuildtage01VH2Sa/RU 355 M: Directdriven high pressure fan 12bar 02Belt-driven low-pressure-plug-in fan furnace03VH2Sa/RU 315KG: Direct driven high pressure fan for 6bar system 01media represents a further technicalourselves gladly. We are able to manufacture pressure resistant andpressure-proof fans up to 120 barsystem pressure. Gladly we call youalso reference projects www.ruwu.deCertain processes and applicationswithin the pressure range over 30,000Pa possess boundaryclassical condensors or compressorsimpossible. Here our multi-level blowers are used.Owing to welded impellers large êExtreme power limitsêWide operating spectrum of Explosion-proof acc. to ATEX êHousing design acc. to pressure-vessel guideline 01detail view on impellers of high-pressure-fan made from 1.4571 04VE5aII/RS 100 R: 2-stage blower maintenance owing to externalêGas-tight-fans for low-and high-temperatureêOil and grease-free execution of the medium-affecting componentsêPossible increase in pressure to 50,000Pa+49 82 71-81 75-99Fax: 5-40E-Mail: salesruwu.de|03ADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service10on highest levelì¤hogaslbuildcumizedlbuild01Hollow shaft with cooling wheel 02RV 800 R: Low pressure fan for 700operating temperature in a brickyardfor 600¡C operating temperature in tempering furnace 04U-HNN/RE 500 R-s: Plug-in fan 03Our decades of experience in the areato advance today into temperature1,600mm. Innovative impeller geometryconsiders both in industrial furnaces,the extreme requirementsto theaerodynamic requirements to thefirmness and guarantees therebyAvailable impeller types:Backwards-curved bladesêForward-curved bladesêDrum rotorêAxial impellersAll hot gas fans arand without spiralDifferent cooling systems possibletemperature up to 01VH2S/RU 280 M: Mobile high pressure fan from aluminum with sound cap 02LT/ZE 560 R-s: Mobile wind blower with frequency converter for automotive 03U-HNN/RE 1000 R-s: germ box fan for 04U-VNN/RE 710 R-s: Hot-dip galvanized 05VE3/RU 140KG: Gas-tight high pressure fan for operating temperature 06VN2S/RU 400 R-g: Sound-isolated essure fan in Volkswagen executionFor your specific requirements ruwuengineering team offers the optimalêWear-resistant fans with particularlyêCorrosion-proof fans with rubber êExplosion-proof fans acc. to ATEX êOptimization of volume flowêUncovering of energy savings Research and designtake place including most modern Engineering-Hotline:-99Fax: +0082 71-81 75-40E-Mail: salesruwu.de03ADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service12interaction of the componentsì¤axialaxial01ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediacontrol device or with inlet vanes large adjustment to the desired operatingêPower limits put farêOperating temperature êFor critical applications with om 315 to 2,500mmêPressure differences up to 5,000PaêCompletely made from Cr-Ni êHorizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: salesruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan 03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl ypesnl ypesr-sBelt drive withmotor asideDirect driveBelt drive with motor on topADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service14One-off production in highest perfection.ruwuinnovation is à mpellers02ruwucomponent manufacturingacc. to your plans and samples:êImpellers up to ¿ 3,400mm êFan casingsêFree forming-pressed flowing êShrouds and inlet cones up to ¿ 3,400mm êShafts up to 3,000mm lengthparts for Meissner+Wurst êManufacturing to 100% in own êDVS certifyingêruwu-Freiformziehen technology The ruwuBalancing service:up to 3,500kg piece weight and up to3,400mm can be balanced staticallyand dynamically.ruwumaintenance service:Simply request the wholeaccessory program:+49 82 71-81 75-99Fax: +49 82 71-81 75-40E-Mail: www.ruwu.de01Low pressure impeller VNN/R 2000 essure 03FEM analysis HNN impeller04Impeller variantsvnn, vn1shnn, vn2svn1s, vm2sve1, ve3, ve5êContinuous welded bladesêOpen execution with straight êFEM supported calculation êVerification of the speed limits of revolutions over skid testsêCharacteristic determination according to DIN 24166 êVersions in Cr-Ni steel, special alloy and special corrosion or êSteel -, cast- or Taperlock êStatically and dynamically ADIALsingleinletfansADIALoubleinletfans|Fanswithoutcasingpecialbuildprssurrsistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|ServiceSo that everything runs approximately!There we are for you.Ru§wurm Ventilatoren GmbHD-86405 Meitingen-Ostendorf1129D-86400 MeitingenPhone: +498271-8175-0+49271-8175-40E-Mail:infoInternet:www.ruwu.deHigh-Efficiency industrial fansInternational agenciesItaly, Switzerland, Turkeyruwumobile and venting systems areis certified according to ISO 729-2. reativeConceptwww.artswiles.deAll rights reserved.Mobile fan systems for fire-brigade,organization, tankoperator, soil publisher, coater, wel-The fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftDirect drive RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|ServiceThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|ServiceThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic cou
plingsAll series are available with dif
plingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature with cardan shaftRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable d
rive systems:Standard belt drive¥Special
rive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature and transmissionor spur gearsRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature or spur gearsRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan w
ith operating temperature RADIALsinglei
ith operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|kgk|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|k|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing|k|||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkgThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤V\bÞkginteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sBelt drive withmotor asideDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Serviceinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sBelt drive withmotor asideDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Serviceinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-smotor asideDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Serviceinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind pla
nt03NL65/AE 800 R: Axial flow fan with b
nt03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-smotor asideDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-smotor asideDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to
the desired operating¥Power limits put
the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|N
LImpellers|Service,ä\V\bÞ´+kpÄÝ
LImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 125
0 R: Sound-isolated axial 03schematic re
0 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverBelt drive with motor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect drivermotor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect drivermotor on topRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL dif
fer by thecontrol device or with inlet v
fer by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sDirect driverRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµinteraction of the componentsÉaxialaxial|||ruwuaxial flow fans are manufacturedgeometry secures the operating pointswithin a higher pressure range. Thereare different drive systems just asavailable as variants complete fromCr-Ni steel. Based on this variety thesupplied by appropriate auxiliarymeasures, e.g. for aggressive mediaThe types VL and NL differ by thecontrol device or with inlet vanes large adjustment to the desired operating¥Power limits put far¥Operating temperature ¥For critical applications with Nominal size from 315 to 2,500mm¥Pressure differences up to 5,000Pa¥Completely made from Cr-Ni ¥Horizontal and vertical installation +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01VL60L/AU 1000 R-s: Belt-driven axial 02VL60L/AU 1250 R: Sound-isolated axial 03schematic representation of inlet positioning rack for research institute02NL60/AE 2000 M: Axial flow fan for cross-wind plant03NL65/AE 800 R: Axial flow fan with belt drive and inlet vane control04Available drive systemsvl nl r-sRADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service,ä\V\bÞ´+kpÄÝMµ,ä\V\bÞ´+kpÄ@ïµThe fascination of a technology lies in the possibilities, which it opensouble inletfansradialfans withoutcasing||||Double suction ruwu¨fans are efficiency up to 82%characteristic curve and are suitableindustrial applications, where cleanand dust-laden air and gases areAvailable drive systems:Standard belt drive¥Special drive strands with housing positions acc. to Eurovent,¥Wide spread power limits from 2,000 to 1,200,000m3For operatings temperature of¥For critical applications with changing pressure ratiosNominal sizes from 224 to 2,500mm availableAspeciality of ruwu¨are plug-in fansplug-in fans are based on ourproven radial fans and are suitabledryers and furnaces.Available drive systems:¥Elastic couplingsAll series are available with different¥Power limits wide spread¥Material and cooling device ¥Available in the nominal ,000mm¥Also available as axial flow fans +49 82 71-81 75-99Fax: 5-40E-Mail: sales@ruwu.de01HNN/ZE 1120 K: Low pressure fan with direct drive with coupling 02VNN/ZE 224 R: Earthquake-proof 01U-VNN/RE 1000 M: Plug-in fan with 02U-VNN/RE 500 M: Plug-in fan with operating temperature RADIALsingleinletfansRADIALdoubleinletfans|Fanswithoutcasingspecialbuildpressureresistant|specialbuildmulti-stagespecialbuildhotgas|specialbuildcustomizedAXIALVL|NLImpellers|Service6Eª\f-*6V\bÞ,ä\V\bÞ=\nGEªLUUµE¤