based on operational rules into a RAPID model of the Yaque del Sur watershed in the Dominican Republic RAPID Yaque del Sur Watershed RAPID RAPID European Consortium for MediumRange Weather Forecasts ECMWF ID: 193121
Download Presentation The PPT/PDF document "Introducing dam routing" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Introducing dam routing
based on operational rules
into a RAPID model
of the
Yaque
del Sur watershed
in the Dominican RepublicSlide2
RAPIDSlide3
Yaque
del Sur Watershed
RAPIDSlide4
RAPID
???Slide5
European Consortium for Medium-Range Weather Forecasts (ECMWF)
The needed subset of data for the
Yaque
del Sur
River can be taken from the global forecast.
RAPIDSlide6
RAPID
“Downscaling”Slide7
RAPID model
Drainage
network:
Real
Muskingum
parameters:
Real?
(calibrated?)
Lateral
inflow:
Contrived
Initial flows:
ContrivedSlide8
RAPIDSlide9
Sabaneta
Sabana
Yegua
RAPID + damSlide10
Sabaneta
Sabana
Yegua
Type of rule
Constant powerConstant levelTarget3.17 MW
380 m
Qmax
25 m
3
/s
30 m
3
/s
Qmin
1 m
3
/s1.8 m3
/s (real)
RAPID + dam model
Drainage
network:
Real
Muskingum
parameters:
Real?
(calibrated?)
Lateral
inflow:
Contrived
Initial flows:
Contrived
Connectivity of the dams:
Real
Curve Elevation – Area:
Real
Spillways’ characteristics:
Contrived
Rules:
Contrived
Initial level in the reservoirs:
ContrivedSlide11
RAPID + damSlide12
RAPID + damSlide13Slide14
RAPID + damSlide15
Qmax
overrides
power generation
Qmax
Qmin
RAPID + damSlide16
RAPID + dam
Downstream reach
from
Sabaneta
Downstream reach
from both dams
Upstream reach
(unaffected by dams)Slide17Slide18
RAPID
(total run = 1 time step)
Set (read) initial flows
for each reach
Pick flows to be used
as inflow into the dams
Read flows
for each reach
Dam module
(1 time step)
Set (read) initial levels
for each dam
Read output flows
from each dam
Read output levels
from each dam
Set initial flow
for next time step
Replace some initial flows
with dam output flows
create initial
lateral flow file
Set (read) general lateral flow
for the whole simulation
Slice a lateral flow
for the next time step
and create file
Set levels
for each dam
RAPID + dam