Step 5Step 1 Attach faucet spoutStep 3Attach faucet handles rod to drain bodyConnect lift rod clevis strappivot rod and adjust linkageStep 7Attach control Step 1Step 1 Cvalve and spoutStep 4Step 1 Con ID: 880453
Download Pdf The PPT/PDF document "Fasten drain body and tail piece to sink" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 Fasten drain body and tail piece to sink
Fasten drain body and tail piece to sink Step 5Step 1 Attach faucet spout Step 3Attach faucet handles rod to drain body Connect lift rod, clevis strap,pivot rod and adjust linkage Step 7 Attach control Step 1 Step 1 Cvalve and spout Step 4Step 1 Connect supply lines and check for leaks Step 9 before attaching(reference installation details) Naru Widespread Lavatory Faucet, SLW-4112 PlumbersPutty PipeSealant 3/32" 1 2 3 4 Alternate Finish Codes - Chrome (standard)SLW-4112chrome nish and for technical help, the latest product information and warranty policy.www.symmons.com/serviceTools & MaterialsInstallation and Service InstructionsNaruWidespread Lavatory FaucetSLW-4112 : If replacing an older faucet ensure water supply is turned OFF before removing. Then open fauce
2 t valves to relieve water pressure. Atta
t valves to relieve water pressure. Attach control valves to sink screw down untilthread stops Deck Front View wrench OFFpositionCW=OFFCCW=OFF Step 4Connect hoses between valve & spoutStep 5Fasten drain body to sink PipeSealant Required rotational swing front of sink bottom view 1 2 PLUMBERSPUTTY angebeveledwasherfrictionwasher ange nutbackof sink * ange washer (optional) *use included ange washer only when plumbers putty is tail piece te ontape Page 2 Installation Instructions Installation Instructions Install stopper and pivot rod to drainConnect lift rod and adjust linkageFlush supply lines before attachingCare of faucet nishClean nish area by using mild soap and water or non-abrasive cleaner and then rinse immediately. A non-abrasive wax may be used to pre
3 serve nish area. Valve cartridge r
serve nish area. Valve cartridge replacement wrench OFF position OFFposition socket wrenchwrench wrench OFFOFF 1 2 3 Drain body 1/2" (13 mm) PipeSealant removable 1 removableremovable HOTCOLD Ensure supply lines are ushed clean before attaching to control valves. Important Supply hoses not included. HOTCOLD Page 3 handle assy. Note (1) screw requires3/32" Allen wrenchNote (2) screw requires3mm Allen wrenchKN-114-EXT-KITKN-113-EXT-KIT ow regulator 2.2 gpm (8.3L/min) (reference table)lift rod stopperP-100N*pop-up drainassembly RL-154LR*includes stopper spoutLN-625-KIT* (reference table) ow regulator (factory installed Valve bodyretainerretainer nut 1/2 inchbrass coupling nut(used in rigid piping installations only) gasket ange nutvalve body (hot) exible
4 hose assy mounting sleeve * Note: When
hose assy mounting sleeve * Note: When ordering parts for faucets with an optional decorative nish, append appropriate three letter nish suf x code to part numbers * ).Parts Assembly Naru Widespread Lavatory Faucet, SLW-4112 1/2"-14 NPSM Hole size 1-1/4" (32 mm) min.1-5/8" (41 mm) max. 4" (102 mm) min. Flexible hose2" dia.(51 mm) 8"(203 mm) min.16"(406 mm) max.Deck thickness 5/16” (8 mm) min.2-3/8" (60 mm) max. Note: Dimensions subject to change without notice. 2-1/4" ( 73 mm) 5-1/2" (139 mm) 2-1/4" dia.(57 mm) 1-1/8" dia. (28 mm) 7/8" dia.(21 mm) Hole size 1-3/8" (35 mm) min.1-1/2" (38 mm) max. 3-1/2"89 mm 5"128 mm 2-7/8"73 mm 2-7/8"73 mm1-1/2" 5/8" (15 mm) Naru Widespread Lavatory Faucet, SLW-4112 31 Brooks Drive Braintree, MA 02184Website: www.symmons.com ZV-589 RE