nifold Quick ReferenceguideThank you for your purchase of the VTTDAZA intake manifoldFirst thing to do when you open your box is to make sure all parts are in their respective bags and nothing has bee ID: 856928
Download Pdf The PPT/PDF document "DAZA Intake Ma" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 DAZA Intake Ma n ifold Quick Reference
DAZA Intake Ma n ifold Quick Reference guide Thank you for your purchase of the VTT DAZA intake manifold ! First thing to do when you open your box is to make sure all parts are in the ir respective bags and nothing has been left out or lost during shipping. Here is a breakdown of what you should have. 1 VTT Intake Manifold Plenum 1 VTT Intake Runners (if full manifold ordered) 4 100mm M6 Bolts 5 30mm M
2 6 Bolts 9 M6 Washers 1
6 Bolts 9 M6 Washers 1 - 10ORB plug 1 - 6ORB Plug 1 - 6 1/8 ” NPT pl ugs depending on order Once all parts are accounted for you c an proceed with the Manifo ld Installation. We suggest this only be done by a qualified technician. If something was missing for your upgrade, please contact us immediately so we can remedy this. This is not an install guide, just a quick refere
3 nce guide
nce guide ANY QUESTIONS, OR FITMENT PROBLEMS, PLEASE EMAIL SALES@VARGASTURBO.COM BEFORE TRYING TO FORCE OR MODIFY ANYTHING. THIS UPGRADE IS PLUG AND PLAY IF THESE INSTRUCTIONS ARE FOLLOWED, ANY ISSUES NEED TO BE ADDRESSED TO AVOID PROBLEMS Quick Reference Tips 1. Do not use the 5 stock bolts to install the plen um to the head, use the 5 supplied 30mm M6 bolts 2. Make sure to install the 10ORB plug into the end o
4 f the plenum if not using it to run a
f the plenum if not using it to run an external PCV, if lef t out the engine can rev up on its own on start up. 3. M a k e sure all 5 O - rings are seat ed on the plenum during install to avoid boost leaks 4. If not using the - 6 ORB ports, and 1/8 ” NPT on spacer . Make sure to plug to avoid boost/ vacuum leaks 5. If not using the 5 1/8 ” NPT Methanol/N o s ports on the bac k of the run ners plu g to avoid boost/vacuum leaks