A clear amber liquid Irritating to eyes and skin Contains Alkyldimethyl benzyl ammonium chloride 5ww Approved by the Health Safety Executive for use as a surface biocideRefer to H S sheet fo ID: 955684
Download Pdf The PPT/PDF document "x0000x0000TECHNICAL DATA SHEET FOR Fungi..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
��TECHNICAL DATA SHEET FOR Fungicidal Wash Page of TECHNICAL DATA SHEETFUNGICIDAL WASH A clear amber liquid. Irritating to eyes and skin. Contains Alkyldimethyl benzyl ammonium chloride 5%w/w. Approved by the Health & Safety Executive for use as a surface biocide.Refer to H & S sheet for full details. Uses: Internal: Beeline Fungicidal Wash is recommended as a prior treatment to walls before the hanging of Wallcoverings. External: Application: Internal:Apply by brush, sponge or cloth. External:Apply by brush, watering can or spray (ideal for use with garden sprayer.) Note: Refer to Health & Safety Sheet for precautions. ��TECHNICAL DATA SHEET FOR Fungicidal Wash Page of Dilution & Coverage rate: Dilute onepart of product with fourparts of water. Apply 1 Litre of diluted product per 12 of surface by brush.On paths by sprinkler 8 11 m² per Litre.Extensive or wellestablished mould growth will require a more concentrated dilution:Dilute onepart of product with twoparts of water. Apply and
allow to stand for 5 minutes before scrubbing into the surface with a stiff yard brush to ensure complete penetration. Advantages: Does not bleach and will not chemically burn surfaces.Can be spray applied.One product is used for algae, moss, fungi and mould, inside and outside.Will not affect many plants growing on walls. Although contact with plant leaves should be avoided.Can be wiped on with a cloth on smooth outside walls.Use on almost any building surface.When dry will not affect paint applied as a surface coating over the product.* When left on the surface Fungicidal Wash has a residual affect of up to 6 months.* Health & Safety Executive approved.NB:It is advisable to test a small area before extensive use. HEALTH AND SAFETYRefer to separate sheet This information supplied is, to the best of knowledge, true and accurate, but any recommendations or suggestions made are without guarantee since the conditions of use are beyond our control. Other Information: Title changed from HallsBeeline to Beeline.Revision date: May 2011