D D9 CalipersAn industry149 Plain and basic de149 Stepped gradingress betwee149 The smalleasy 149 the beam and slider are the zero reference point measuring face Standard calipers allo ID: 938766
Download Pdf The PPT/PDF document "Mitutoyo reserves th" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
D Mitutoyo reserves th D-9 CalipersAn industry• Plain and basic de• Stepped gradingress betwee• The smalleasy • the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.• Carbifor rstones, etc.• Decim(metrc/inch and inch models only).Vernier CaliperSERIES 530 — Standard model 1 530-320 (Carbide-timeasurement)530-102 (Round depth bar type) Range (mm)Outside jaw thickness030003.80608Range (mm)ABDEFHL01721.54053.5301618201721.54053.53016229020.5255053.5301628802227.56466.5362040403847908950257800506013011161321240Note: 530-100 and 530-102 incorporate a round depth bar (The depth bar shown in the illustration above is a different type. 530-100530-101DIMENSIONS Unit: mm L E H DA B F D Mitutoyo reserves th D-10 Measurement Applications1. Outside measurement2. Inside measurement4. Depth measurement3. Step measurement Order No.Range (mm)Accuracy (mm)Depth barGraduation (mm)Remarks530-1000±0.05ø1.9 mm rod0.05—530-1020±0.05—530-320±0.05BladeCarbide-tipped jaws for outside measurement530-335±0.05Carbide-tipped jaws for outside and inside measurement530-3210±0.05Carbide-tipped jaws for outside measurement
530-3220±0.08Carbide-tipped jaws for outside measurement530-5010±0.10——530-5020±0.15* Partial Measuring Face Contact Error EMPE/Scale Shift Error SMPE are terms (notations) used in JIS B 7507: 2016, revised based on ISO 13385-1: 2011. The measurement method is the same as before. Refer to page D-40 for details. SPECIFICATIONS MetricOrder No.Range (mm)Maximum Permissible Error•EMPE (outside measurement)•SMPE (inside measurement)Depth barGraduation (mm)Remarks530-1010±0.05Blade0.05—530-122±0.030.02High accuracy model530-1080±0.050.05—530-123±0.030.02High accuracy model530-1090±0.080.05—530-124±0.040.02High accuracy model Metric/Inch with metric/inch double scaleOrder No.Range (mm)Accuracy (mm)Depth barGraduationRemarks530-1040±0.05Blade0.05 mm (1/128 in) —530-316Clamping screw below the slider530-312±0.030.02 mm (0.001 in) High accuracy model: ±0.03 mm530-1140±0.050.05 mm (1/128 in)—530-118±0.030.02 mm (0.001 in)High accuracy model: ±0.03 mm530-1150±0.080.05 mm (1/128 in)—530-119±0.040.02 mm (0.001 in)High accuracy model: ±0.04 mm Inch with inch/inch double scale Order No.Range (in)Accuracy (in)Depth barGraduation (in)Remarks530-1050±0.5/128Blade0.001—530-1160±0.5/128