PRESSURE RATING MIN 150 kPa MAX 500 kPa WATER RATINGwwwwaterratinggovauThe more stars the more litres per minuteIn accordance with ASNZS 6400Licence No 0133 Phoenix Tapware 40 MAX SPECIFICAT ID: 845977
Download Pdf The PPT/PDF document "TO VIEW FULL WARRANTYTEMPERATURE RATING" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 TO VIEW FULL WARRANTYTEMPERATURE RATING:
TO VIEW FULL WARRANTYTEMPERATURE RATING: PRESSURE RATING: MIN 150 kPa - MAX 500 kPa WATER RATINGwww.waterrating.gov.auThe more stars the more litres per minuteIn accordance with AS/NZS 6400Licence No. 0133 Phoenix Tapware 40 MAX SPECIFICATIONS PRODUCT CODE:MATTE BLACK5 STAR - 6.0 LT/MIN A Registered Design and Trademark of Phoenix Industries Pty. LtdWhile we aim to ensure the speci�cations shown are correct at time of printing, Phoenix Tapware reserves the right to make modi�cations without prior notice. Always use the physical product measurements for mark-ups and roughing-in as the line drawing shown may differ from the actual product over time. All measurements are shown in millimetres. Some colours may vary across product types due to differing construction materials. Printed images are a representation only and the colour or �nish may vary from the actual product.www.phoenixtapware.com.au INFORMATION: All surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus based cleaning products, as they are abrasive. Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty. PLEASE CLICK HERE TO VIEW FULL WARRANTY 1 x Basin mixer (no handle) 1 x 450mm braided 昀
2 6C;exible cold hose 1 x 450mm braided
6C;exible cold hose 1 x 450mm braided �exible hot hose 1 x Installation kit 1 x Installation instructions 1 x Warranty card V210319 1. BASIN BODY 2. 25MM CARTRIDGE 3. LOCKNUT 4. DOME 5. RETAINER WASHER 6. DOME RETAINER 7. MIXER HANDLE (NOT INCLUDED) 11. O-RING 14. FIXING PLATE 8. GRUB SCREW M4X5 12. FLEXIBLE HOSE 450MM COLD 15. FIXING PLATE RUBBER 9. DRESSPLATE 13. FLEXIBLE HOSE 450MM HOT 16. M8 NUT 10. SCREW 17. M8 THREADED ROD 18. AERATOR PARTS LIST 765432181891115101417161213 SPECIFICATIONS BASIN MIXER (NO HANDLE) PRODUCT CODE: 116-7703-10 FINISH: MATTE BLACK WELS: 5 STAR - 6.0 LT/MIN ZIMI A Registered Design and Trademark of Phoenix Industries Pty. Ltd While we aim to ensure the speci�cations shown are correct at time of printing, Phoenix Tapware reserves the right to make modi�cations without prior notice. Always use the physical product measurements for mark-ups and roughing-in as the line drawing shown may differ from the actual product over time. All measurements are shown in millimetres. Some colours may vary across product types due to differing construction materials. Printed images are a representation only and the colour or �nish may vary from the actual product. www.phoenixtapware.com.au 03 9780 4200 MAINTENANCE AND CARE: PACKAGING
3 INCLUDES WATER RATING www.waterrating.go
INCLUDES WATER RATING www.waterrating.gov.auThe more stars the more In accordance with AS/NZS 6400Licence No. 0133 Phoenix Tapware All surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus based cleaning products, as they are abrasive. Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty. MAINTENANCE AND CARE: PACKAGING INCLUDES 1 x Wall mixer handle 1 x Installation kit 1 x Warranty card Displayed in order from left to right 150 37 133 12 BASIN / VESSEL MIXER HANDLE ZIMI While we aim to ensure the speci�cations shown are correct at time of printing, Phoenix Tapware reserves the right to make modi�cations without prior notice. Always use the physical product measurements for mark-ups and roughing-in as the line drawing shown may differ from the actual product over time. All measurements are shown in millimetres. Some colours may vary across product types due to differing construction materials. Printed images are a representation only and the colour or �nish may vary from the actual product. www.phoenixtapware.com.au 03 9780 4200 A Registered Design and Trademark of Phoenix Industries Pty. Ltd CHROME MATTE BLACK MATTE WHITE OATMEAL SAGE GREEN POWDER BLU