0721 0219Page 1 of 2SPECIAL INSTRUCTIONS1978 may release dust containing lead or asbestos EXPOSURE TO LEAD OR ASBESTOS CAN BE VERY HAZARDOUS TO YOUR HEALTH Wear a NIOSHapproved N95 particulate x006 ID: 894120
Download Pdf The PPT/PDF document "SOLVENT TYPE WaterborneStock colors Swis..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 07/21 (02/19)Page 1 of 2 SOLVENT TYPE: W
07/21 (02/19)Page 1 of 2 SOLVENT TYPE: WaterborneStock colors: Swiss Coffee and Black.L Tintable White, M Medium, U Ultra Deep50 g/L (as supplied)MAXIMUM RAVOC SOLIDS BY VOLUME SOLIDS BY WEIGHT11.91 lbs.COMPOSITION BY WEIGHTVehicle–57.1%Vinyl acrylic resinsWater & additives*Prime pigments include titanium dioxide (TiORECOMMENDED FILM THICKNESS PER COATWet: 3.7 milsPRACTICAL COVERAGE PER COAT AT RECOMMENDED DRY FILM THICKNESSTHINNING RECOMMENDATION: necessary to maintain good workability, add up to 1/4 pint (4 �. oz.) of clean water AVERAGE DRY TIME@77ºF/25ºC To touch: 30–60 minutesAPPLICATION EQUIPMENT: Brush, roller, airless sprayPACKAGING: STORAGE: above 110ºF for extended periods of time. Extreme temperatures may cause Technical Bulletin at Warm, soapy waterpaint, call Dunn-Edwards Customer Service at 1-888-DEPAINT or visit www.dunnedwards.com. CONFORMS TO: MPI Approved Product #53; CRGI Green Wise Certi�edSAFETY DATA SHEET: Available at www.dunnedwards.comSURFACE PREPARATION: All surfaces must be cured, clean, dry, and free from dirt, dust, rust, stains, grease, oil, mildew, wax, efflorescence, bond-breakers, SPECIAL INSTRUCTIONS1978) may release dust containing lead or asbestos. EXPOSURE TO LEAD OR ASBESTOS CAN BE VERY HAZARDOUS TO YOUR HEALTH. Wear a NIOSH-approved N95 particulate �lter mask to avoid breathing dust. Use a HEPA vacuum for Edwards brochure on “Surface Preparation Safety”or call U.S. EPA’s lead hotline at 1-800-424-LEAD, or visit www.epa.gov/lead or /asbestos, or contact your state or local Health Agency. This product can neither cause nor p
2 revent or cure the growth of mold, milde
revent or cure the growth of mold, mildew, or DRYWALLTextured:MASONRYTilt-up concrete: EFF-STOPMETAL ULTRASHIELDULTRASHIELD*ULTRA-GRIPwww.greenwisepaint.com. Dunn-Edwards is a member of CRGI. SURFACE PREPARATION: be sufficient. For properly prepared new surfaces, two (2) coats are typically requireAll surfaces must be cured, clean, dry, and free from dirt, dust, rust, stains, grease, oil, mildew, wax, efflorescence, bond-breakers, and other contaminants. Remove all loose, interior, ultra-low VOC, acrylic latex flat paint that combines exceptional hide with superior stain resistance and washability. provides long-lasting protection, applies easily, dries quickly and has low odor. It is ideal for high-end residential and commercial PRODUCT INFORMATION≤ 50 g/L VO Flat Paint HEALTH & SAFETY CAUTIONS: INHALATION OF SPRAY MIST OR SANDING DUST MAY BE HARMFUL. Use only with adequate ventilation. Avoid breathing vapors, spray mist and sanding dust. Wear NIOSH-approved N95 particulate �lter mask when spraying or sanding. Avoid contact with skin and eyes. Do not ingest. FIRST AID:having dif�culty breathing, move to fresh air. For eye contact, immediately �ush with water for 15 minutes. For skin contact, wash thoroughly with soap and water.• KEEP OUT OF REACH OF CHILDREN •Ingredient (CAS #): Water (7732-18-5); Titanium Dioxide (13463-67-7); Nepheline WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov PRODUCT INFORMATION Flat Paint DUNN-EDWARDS CORPORATION • 4885 East 52 Place • Los Angeles, California 90058-5507 • (888) DE PAINT dunnedwards.com337-246