No sag formulaReduces corrosion Density lbsGallon Appx Provides hiding power abrasion resistance corrosion protection and sound deadening toInside body panels such as quarter panels Can be pa ID: 203703
Download Pdf The PPT/PDF document "3M" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
3M Underseal Undercoating - Paintable, PN 08882, is a rubberized, paintable, aerosol undercoating that is designed for application to vehicle undercarriages, floor pans, wheel wells and trunk areas to Features, Advantages, Benefits No sag formulaReduces corrosion Density lbs/Gallon (Appx.) Provides hiding power, abrasion resistance, corrosion protection and sound deadening to:Inside body panels (such as quarter panels) Can be painted 30 minutes after application.Handling and Application Information Clean and dry surface with soap and water, then with an appropriate grease and wax remover.Shake can thoroughly for 1 minute after the agitator ball begins to move.Apply in relatively light coats, allowing for the solvent to evaporate somewhat between coats (3-5 minutes). Build to desired thickness.Dry time is typically 30 minutes at room temperature. Thicker applications may take longer to dry.hour). If waiting longer than 24 hours, scuff lightly before painting.Always invert can and purge nozzle after use, to insure sprayability the next time.regulate or prohibit the use of surface preparation and cleanup solvents based on VOC content. Consult your local and Federal air quality regulations for information. When using solvents, use in a well ventilated area. Extinguish all sources of ignition in the work area and observe precautionary measures for handling these materials. Refer to product label and MSDS for P.N. 8984, 8986, or 8987 for detailed precautionary information. Provides hiding power, abrasion resistance, corrosion protection and sound deadening to:Inside body panels (such as quarter panels) Store at room temperature. Rotate stock on a "first-in, first-out" basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months. Always use in a Keep away from heat, sparks and flames. A void eye and skin contact. A void breathing of vapors, mists or spray.Use only in areas with sufficient ventilation to maintain vapor concentrations below recommended exposure limits.Wash thoroughly after handling.Do not puncture or incinerate.Do not store at temperatures above 120° F (49° C).Note: Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.