Troubleshooting Pen Check battery by pushing in the end of the point You will hear a soft electric sound if it is working Install new batteries correctly to solve the problem Device Setup ID: 180872
Download Presentation The PPT/PDF document "Mimio" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Mimio TroubleshootingSlide2
Pen
Check battery by pushing in the end of the point.
You will hear a soft electric sound if it is working.
Install new batteries (correctly) to solve the problem.Slide3
Device Setup
Install software and follow directions.
Clear off whiteboard (take down decorations and other things that might cause interference)
Erase and clean board thoroughly
Make sure cables are all attached in proper places
Place device in top left corner with at least one hand’s width apart from projection. (you can move the device to other areas – you will need to go to the settings tab to change orientation.Slide4
Attachment
Suction cups – don’t work well
Pull tabs – will leave a residue on the board
Magnets – do not fit well – still falls down
Suggestion – try not to move the computer or device once it is set upSlide5
Calibration
Click calibrate
Make sure to touch the pen exactly in the middle of the x in the circle – otherwise the pen doesn’t calibrate properly
Whether you like it or not the
Mimio
needs to be calibrated oftenSlide6
Other
Pen is spotty when writing – you must keep contact with pen and board while writing
Unable to calibrate – adjust
the surface size for the
Mimio
device and verify that it is same size as the whiteboard surface Do not expose Mimio
device with direct sunlightSome other electrical devices can interfere with your deviceDo not place anything between the device and whiteboardDon’t forget to update software
If all else fails – turn off all devices,
uplug
everything and begin againSlide7
Help
Mimio
setup
pdf
Mimio
user guide
pdf