New Product Training 2015 Mono MFPs & Printers Course Objectives - PowerPoint Presentation

New Product Training 2015 Mono MFPs & Printers

Course Objectives Discuss Menu Layout/Service Menu Provide hands On With The Products Answer Your Questions

The New Oki Mono Products B412dn / B432dn / B512dn / ES5112 & MB472w / MB492 / MB562w / ES5162

All Based On This Engine

General Information Wireless Operation Wired / Wireless is an “either / or” situation Apple AirPort / Oki Mobile for Android Not mutually exclusive Wireless Option – Printers End User Installable MSRP - $70 approximately Wireless – MFP Factory Installed Only MB472w & MB562w No Wireless in MB492 ONES: Optional for printers (WEP) Not Available for MFP’s

Function (End user) View Information *System Information *Network (Information) Press “Setting” key Press key till finding out “View Information” Press OK key F/W Checked System Information 　 　 　 　 　 　 　　　Serial No.Asset No.Lot No.Firmware VersionCU VersionPU VersionPanel VersionTotal MemoryFlash Memory Wireless Information（It will be shown when enabling the Wireless LAN) 　　　　　　　Firmware VersionSerial No.SSIDSecurityStateBandChannelRSSI Network Information（Wired LAN)　Network ConnectionIPv4 AddressSubnet MaskGateway AddressMAC AddressNIC Program VersionIPv6 Address (Local)IPv6 Address (Global) View Information Network Information Press “Device Setting” icon Press “View Information” icon on the panel

Function (End user) Device Information Device Information 　 　 　 　 　 　 　 　 　 　 　 　 　 　　 　　　Job Lists　　Fax Job View/Cancel　　Supplies Status　Drum Unit　Toner(n.nK)　 Counter　　　　　　Print CountTray 1　Tray 2　MP TrayScan CountTotal Scanned Pages　 Scanned Pages　Total Scanned Pages (ADF)　Scanned Pages (ADF)Wireless Information　　* Only show this category when enabling the wireless LAN.　　　　Firmware Version　 Serial No. 　 SSID 　 Security 　 State 　 Band 　 Channel 　RSSI　 * When enabling Wireless LAN Press “STAUTS” key Select “Device Information” on the panel F/W Checked

Function (End user) Various Report Print Fax TX / RX Log Journal Report [7in Touch Panel] Press “Device Setting” icon on the panel. The other operation is as same as graphics panel. [Graphics Panel] F/W Checked

Silent Mode Function (End user) Adimn Setup > Management > Power Save When waking up from “Sleep Mode” without the printing process, the printer will not perform the initialization. ECO Mode The default setting is ON Management Power Save Power Save Time Sleep Time Auto Power Off Time Silent Mode ECO Mode F/W Checked

User Functions Scan To Email/Scan to Shared Folder Virtually the Same As MB4x1. Okidocs 4074 And 4059 Have Been Updated. Job Macro Feature Actually Useful!! No Remote PC Setting Needed When Push/Pull Scanning.

Service for field engineer System Maintenance Press the following procedure. Setting > 　　　　　 > 0 > 1 > 0 > 3 > Input Password The default password is “000000”. Common F/W Checked

Service for field engineer System Maintenance (1) Do not use Format Do not use 45762101TH_R1 : Section3.2 (p92) 45762111TH_R1 : Section3.1 (p.94) F/W Checked

Service for field engineer Super G3 Setting (Key) > Admin Setup > User Install > Super G3 (ON/OFF) If customer may have a problem for transmitting / receiving fax message. Super G3 = OFF (especially through Optical Network) Reduce H/Modem Rate (Admin Setup > Fax Setup > Fax setting ) F/W Checked

Service for field engineer Fax Error Code 45762101TH_R1 : Section2.5.3 (p53) 45762111TH_R1 : Section2.5.3 (p.55) F/W Checked

Forced ON Line Mode Turn on the switch while pressing “1” and right key. Turn on the switch while pressing “1” and “6” key. MB472 MB492/MB562 F/W Checked

Resetting the NIC To Factory Defaults This Function will Return All Network Settings. Hold Down 8 Key and STOP Key Upon Startup(MB492,MB562,ES5162) For MB472 Hold The Down Arrow And Stop Key

Improve the paper setting method of the MPT B4x1/MB4x1 B4x2/MB4x2 Paper 　 end 　 Lever Hopper-MPT （ Lifting manually ） Button-MPT Paper setting method 　① Moving down Hpper-MPT 　② Setting media to Hopper-MPT　③Pressing Button-MPT⇒Hopper-MPT to be liftedPick uｐ roller（Automatic hoisting　）paper setting method 　①Setting media to Hopper-MPTOther　Paper end detection is addedHopper-MPTAutomatic hoistingHopping rollerHopping roller Up and down manuallyCurrent B4x1/MB4x1 are required 2 Action (paper set, lift-up button is pressed), there was dissatisfaction point that button operation does not understand.-PN/FN307 Improvement to one action of the paper set. (Button press is not required by the automatic paper detection sensor)

Option compatibility New 2 nd tray has backward compatibility. Current 2 nd tray will be EOL after 307 release 256M RAM work with B4x1 only Wireless module works with B5x2/B4x2 only (incl. ES variant) option 2nd tray (current) 2nd tray (new) 256MB RAMwireless module(new)P/N44575709TBD44615411TBDnewmodelDTMFPES5162dnwMB562dnwES4192dnMB492dnMB472dnw　 X　　SFPES5112dnB512dnES4132dnB432dnB412dn　X　XcurrentmodelDT MFPES4191ES4161MB491dnMB471dnwMB461dnXX　　SFPES4131dnES4131dn+B431DNB431DN+B411DNX X X 　 EDT MFP MB451dn 　 　 　 SFP B401D X

Consumable compatibility Toner for current model (B4x1) is not compatible with new model (B4x2) Drum is common part current model (B4x1) and new model (B4x2) ES model has dedicated toner and drum Toner / drum is common for SFP (B4x2) and MFP (MB4x2) consumable Toner for current model Toner for new model image drum B4x1(EDT) B4x1(DT) ES41x1 B4x2 ES41x2 B4x1 (EDT)B4x1(DT)B4x2ES41x1ES41x21.5K2.5K3K 7K12K11.1K(5%)3K7K12K11.1K(5%)newmodelESMFPES5162dnwES4192dn 　　　　　　　　X 　 　 X SFP ES5112dn ES4132dn B MB MFP MB562dnw MB492dn 　　　　　 X X X 　 　 X 　 SFP B512dn B432dn MFP MB472dnw 　 　 　 　 　 X X 　 　 　 X 　 SFP B412dn current model ES MFP ES4191 ES4161 　 　 　 　 　 X 　 　 　 　 　 　 X SFP ES4131dn ES4131dn+ B MB MFP MB491dn 　 　 X X X 　 　 　 　 　 X 　 SFP B431DN B431DN+ MFP MB471dnw MB461dn 　 　 X X 　 　 　 　 　 　 X 　 SFP B411DN B/MB (EDT) MFP MB451dn X X 　 　 　 　 　 　 　 X 　 　 SFP B401D

Questions