INART 258 Fundamentals of MIDI amp Digital Audio Mark Ballora instructor 1 2 Recording Fundamentals Recall the slides from earlier presentations concerning reverberation 2 3 Distance ID: 500670
Download Presentation The PPT/PDF document "1 Recording Fundamentals" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
1
Recording Fundamentals
INART 258 Fundamentals of MIDI & Digital Audio
Mark Ballora
, instructor
1Slide2
2
Recording Fundamentals
Recall the slides from earlier presentations concerning reverberation...
2Slide3
3
Distance
As sound sources move farther from us their volume drops.
Another change that occurs is the ratio of direct sound to reverberant sound.Slide4
4
Listener
Reverberation
Simulates the natural propagation of sound in a closed space, in which wave fronts reflect off of the space’s surfaces. A longer travel path means a short delay before the front reaches the ear.
Three stages:
Direct sound
from source to listener; gives the impression of source’s location.
1)
Early reflections
: first reflections to reach listener from surfaces; give the impression of room size.
2)
Diffuse reverberation
: later and more frequent second (and higher)-order reflections, give the impression of the “room’s sound.”
3)Slide5
5
Reverberation
time
amplitude
Impulse
Early
reflections
Diffuse reverberation
Acousticians measure a room’s
impulse response
by creating a short sound burst (hand clap, flick of a lighter, click from a toy) and measure the amplitude and timing of the reflections.Slide6
6
Reverberation
As reverberation is an essential component of natural sounds, it is considered an essential effect in recorded and amplified sounds.
Popular music is recorded one instrument at a time, and then an artificial environment is creating by mixing and adding reverberation (and other effects).
Classical music is recorded in a carefully selected venue, with the intention of capturing the sound of the performer
in that space
.Slide7
7
Reverberation and Recording
In concert recording, choices of microphone selection and placement are meant to capture a desirable blend of direct and reverberant sound in the space.
A microphone’s directionality pattern describes the relative intensities it is able to capture from different directions.Slide8
8
Omnidirectional Microphones
Omnis capture sound equally from all directions.
This is illustrated on a polar diagram.
Imagine the microphone is in the center of the circle.
The heavy line indicates that sounds from all directions are captured with equal intensity.Slide9
9
Directional Microphones
Directionals are most sensitive to sounds arriving from a frontward direction, and less sensitive to sounds arriving from the sides or rear.
A directional pattern commonly used in recording is the
cardioid
, which drops in sensitivity at the sides, and captures very little from the rear.Slide10
10
Microphone Placement
10Slide11
11
Localization vs. Spaciousness
11
Localization
refers to an ability to recognize apparent locations of performers when listening to a stereo recording. This often relies an the listener sitting in a “sweet spot” equidistant between two speakers, which is not always possible.
Spaciousness
refers to a quality of diffuse reverberation. It is apparent to listeners whether or not they are situated in a “sweet spot.”Slide12
12
Microphone Configurations
Seasoned recording engineers know many varieties of configurations and microphone types.
Different configurations offer advantages in terms of strong localization, spaciousness, and the balance of direct to reverberant sound.
What follows are two “entry level” configurations that are helpful starting points.
12Slide13
13
Microphone Configurations
In this configuration, at least two microphones are arranged in an arc around the performers.
Since performers will be closer to one microphone than to another, their instruments’ wavefronts will reach one microphone before another.
These
time-of-arrival differences
contribute to a strong sense of spaciousness, although localization may not be strong.
13
Spaced OmnisSlide14
14
Microphone Configurations
14
Coincident Directionals
In this configuration, two directional microphones are placed in the same location, oriented 90° from each other.
Since they are coincident, the time-of-arrival is the same for all wavefronts, but the
intensity differences
reaching the two microphones create a strong sense of localization, although the sense of spaciousness may be weak.
In an X-Y configuration, two cardioids are oriented 90° from each other.Slide15
15
Microphone Configurations
15
Semi-coincident Directionals
In this configuration, two directional microphones are slightly spaced.
The distance between them is typically on the order of 7.5”, the average diameter of the human head.
This configuration is a compromise, offering both intensity and time-of-arrival differences, and thus creating a fair sense of both localization and spaciousness. Slide16
16
16
Phantom Power
Some microphones require an electrical current to keep them on.
This is typically supplied by the device the microphone is plugged into. This device sends a current up the microphone cable (typically +48V DC) that powers the microphone.
If a microphone does not require phantom power, it will not be affected if the receiving device has phantom power turned on.
However, it is good practice to plug a microphone in before turning on the phantom power, and to turn phantom power off before unplugging a microphone.