DATA Watertight UFlow ORDERING INFORMATION AT PRODUCT DATA SPECIFICATIONS 153 BOWLES RA 01001WWOLYFSTCOMOLYF are trademarks of OMG Inc Copyright ID: 259676
Download Pdf The PPT/PDF document "One-piece spun aluminum body and heavy d..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
One-piece spun aluminum body and heavy duty cast aluminum strainer dome and clamping ring provide strength and durability. The drain flange has a depressed sump area to facilitate water drainage from surface. The Hercules RetroDrain Seal technology for a mechanical watertight connection to PVC or cast iron pipes to prevent water from backup damage. Available in 3-in., 4-in., FEATURES & BENEFITSExtra large flange allows positive attachment of roof flashing membrane ICATION DATA Watertight U-Flow ORDERING INFORMATION AT PRODUCT DATA SPECIFICATIONS 153 BOWLES RA 01001WW.OLYFST.COMOLYF are trademarks of OMG, Inc. Copyright © 2011 OMG, Inc. All rights reserved. REPARATIONSTEP 1 HerculesDrain BodyRoof MembraneDeckU-Flow SealExisting DraiExisting Pipe Examine the existing water leader to make sure there are no elbows that prevent the drain ® Seal into end of drain stem and tighten screws enough to hold STEP 2 U-FlowScrewdriver Alternately tighten seal compression ring screws with U-Flow Screwdriver until hand tight. Hercules Drain body is correctly installed STEP 3 Flashing Membrane(Refer to project specifications) Secure the drain flange to the roof deck/nailer using a minimum of three pan-head fasteners, ing ing membrane must be installed per roof membrane manufacturer’s detail. ClampingRingMetal Stud Place clamping ring over metal studs. Install stainless steel nut and lock washers tightening STEP 5 StrainerDom Install strainer dome by aligning screw holes with the holes in the clamping ring. Secure with HOW TO SHORTEN AN OW RETROFIT DRAIN Figure 1: The minimum length of the metal retrofit drain stem with a U-Flow Seal Assembly. Max. length 50 mm (2")Min. length 63.5 mm (2½") desired length and insert U-Flow Seal. Insert the U-Flow Seal in the cut drain stem and tighten the seal screws. Once the drain and seal have been assembled, insert it into the existing water leader and complete the Hercules® RetroDrain INSTAATION PROCEDURE 153 BOWLES RA 01001WW.OLYFST.COMOLYF are trademarks of OMG, Inc. Copyright © 2011 OMG, Inc. All rights reserved.