Needle Valves needle valves HOKE IncPO Box 4866 x2022 Spartanburg SC 293054866Phone 864 5747966 Fax 864 5875608wwwhokecom x2022 Saleshokecircorcom HOKE manufactures a complete line ID: 300999
Download Pdf The PPT/PDF document "IndexAt a Glance1700 Series" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
IndexAt a Glance1700 Series Needle Valves needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com HOKE manufactures a complete line of precision needle valves. Before making your valve selection, be sure to consider the system pressure, operating temperature, required ow and materials of construction. If your application requires a valve not available in this catalog, please contact your HOKE stocking distributor or call HOKE at (864) 574-7966.In addition to the needle valves in this catalog, HOKE manufacturers other lines of specialty needle valves:• Cylindervalvesprovidesafe�owcontrolfor�llinganddrainingcylinders.Valvesareavailable with burst disks, spring relief devices, and metal or PCTFEstemtips.Formoreinformation,refertoHOKE’sSamplingCylindersandAccessories catalog (PN 79008).• Gaugevalvesaretypicallyusedforcalibration,isolation,andbleedingofgaugesandother instruments. They allow for safe installation and removal of instruments and providemultiplemountingpositions.Formoreinformation,refertoHOKE’sFluidControlComponentcatalog(PN79020).• Plugvalvesareusedinapplicationswhereinstanton/o�serviceisnecessary.HOKEplugvalves are available in quarter-turn (7300 series) or rising stem (7400 series) models. Both designs include a straight through bore, which provides maximum ow and rodability. For more information, refer to the 7300 series catalog (PN 79039) and the 7400 series Catalog(PN78165). needle valves Needle Valves at a Glance HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 2 SERIEDECRIPTION/APPLICTIONFETURESTDA BOY MTERI1700 Series(pg. 5)Panelboardinstrumentation PressuregaugevalvesSamplingsystems ResearchlaboratoriesOxygenservice CorrosiveorhighpressureserviceCylinderValvesDyna-Pak®packing Longcyclelife Broadselectionof�ttingconnections316 stainless steelMonel®2100 Series(pg. 8)Hydraulicsystems HightemperatureserviceGassamplingTeststandsChoiceofDyna-Pak®orGraph-Lock high temperature packing Highpressurecapability ChoiceofallmetalstemormetalstemwithPCTFEstem tipBrass316 stainless steelCarbonsteel2200 Series(pg. 12) CorrosivehandlingSamplingsystems Meteringservice Longservicelife ExtendedtemperaturerangeDyna-Pak®packing316 stainless steel2219 Series(pg. 16)• Severeserviceapplications• Steamserviceinpowerplants• Hotcondensates• MeetsANSI900#speci�cations• Highpressure/hightemperature design• Bubble-tightleaktestingatboth seat and packing316 stainless steel2700 Series(pg. 20)Sourgasservice Re�neries ChemicalprocessingOilandgasdrillingDyna-Pak®packing Corrosionresistance Extendedlifecycle316 stainless steel2800 Series(pg. 23) Hightemperatureservice Corrosivehandling Reactiveandhotcondensates Hightemperatureservice Extendedlifecycle Choiceofvariousconnections316 stainless steel3700, 3800 and3900 Series(pg. 26) Instrumentairlines Sampling Gaschromatography CylindervalvesTeststandsChoiceofstemtipsDyna-Pak®packing Broadselectionofconnection options Optionalcolor-codedhandles for uid identi�cationBrass316 stainless steelCarbonsteelMonel® 3 MAX. OPERTING PRESSURE 70° F 21° OPERTING TEP. RNGELOW RNGE VRIE W/ EN CONN. ICE IZESTDA EN CONNECTION6000 psig(414 Bar)Metal stem tip:-65° F to +450° F(-54°+232°C)PCTFE stem tip:-20° F to +250° F(-29°+121°C)0.310.187 (4.8 mm)GYROLOK Male NPT Female NPT8 mm GYROLOKBrass:3000 psig (207 Bar)Stainless steel:6000 psig (414 Bar)Carbon steel:5000 psig (345 Bar)Dyna-Pak®/metal stem tip:-65° F to +450° F(-54°+232°C)Dyna-Pak®/PCTFE stem tip:-20° F to +250° F(-29°+121°C)Graph-ock®/metal stem tip:-60° F to +600° F(-51°+316°C)0.40 to 1.200.188 to 0.313 (4.8 mm to 8.0 mm)GYROLOK Male NPT Female NPT5000 psig(345 Bar)-65° F to +450° F(-54°+232°C)0.12 to 1.40.086 to 0.313 (2.2 mm to 8.0 mm)GYROLOK Male NPT Female NPT10, and 12 mm GYROLOK6000 psig (414 bar)-100 to +1000(-75 to +5380.47, 1.09, 1.20(Cvfactorfor0.437”ori�cenotavailableattime of publication)0.170”(4.3mm),0.250”(6.4mm),0.312”(7.9mm)0.437”(11.1mm)¼”,½”,¾”1”GYROLOK¼”,½”,¾”,1”FemaleNPT3/8”,½”,¾”1”Tubesocketweld3/8”,½”,¾”1”NPSsocketweld12 mm, 22 mm, 25 mm GYROLOK6000 psig(414 Bar)-65° F to 450° F(-54°232°C)0.600.187 (4.8 mm) Male NPT x Female NPT Female NPT x Female NPTGrafoil® packing:2500 psig (172 Bar)Dyna-Pak® packing:5000 psig (345 Bar)Grafoil® packing:-100° F to +700° F(-75°+370°C)Dyna-Pak® packing:-40° F to +450° F(-40°+232°C)1.100.312 (7.9 mm)GYROLOK Female NPT Socket weld316 SS, CS & Monel®:5000 psig(345 Bar)Brass:3000 psig(207 Bar)Metal stem tip:-65° F to +450° F(-54°+232°C)PCTFE stem tip:-20° F to +250° F(-29°+121°C)0.07 to 1.10.06 to 0.312 (1.5 mm to 7.9 mm)GYROLOK Male NPT Female NPT3, 6, 8, 10, and 12 mm GYROLOK HOKE Needle Valves Needle Valves at a Glance 4 CWC50000011111211223344556 10 psi50 psi10 psi250 ps500 psi1,000 psi CAC50000011111211223344556 10 psi50 psi100 si250 psi500 psi1,000 psi TodeterminetheCvor�owofliquid60°(16°C):where:p = p = inlet pressure in psia = outlet pressure in psiaGPM = flow in gallons per minuteS.G.specificgravityofliquidwherewater60°(16°C)TodeterminetheCvor�owofgas 70°(21°C):where:p = p = inlet pressure in psia = outlet pressure in psia SCFHflowinstandardcubicfeetperhourS.G.specificgravityofgaswhereair70°(21°C)and14.7psiaT = temperature in ° FNote: Maximum e ective p for compressible uids is ½p CoGS p GCS p CS(( p1) (( p1) oS11 Flow capacity of HOKE Needle ValvesTheCvfactoris�owcoe�cientexpressingtherateof�owingallonsperminuteof60°(16°C)waterwithpressuredropofpsiacrossthevalve.The�owisdependentontheinletandoutletpressures,temperature,speci�cgravityandtheCvcoe�cient.Dyna-Pak® Stem Packing SystemDyna-Pak®providessuperiorsealingperformancewhilereducingmaintenancecosts.ConsistingofalternatewafersofTFEandmetalspacers, stem leakage is virtually eliminated while the problems associated with TFE cold ow are minimized.As the packing nut is tightened, metal spacers squeeze the TFE wafers, driving the TFE against the stem. At the stem, forces are concentrated and the TFE wafers provide multiple line seals. In addition to squeezing the TFE wafers, the metal spacers help contain the TFE and drastically reduce its ability to creep.Dyna-Pak®packinghastheabilityto:• Utilizesystempressuretoincreasee�ectivenessineliminatingleakage• Providereducedoperatingtorque• Helpeliminatefugitiveemissions• Reducetheneedforfrequentpackingadjustments• Operateintemperaturesfrom-65°to+450°(-54°to+232°C) CpUMMrLLOAD SSYTEM OKE Needle Valves are ered With a Choice of Stem Tip ptions to Provide Greater Flexibility Blunt Vee-Point The blunt vee-point stem tip provides full ow with only a few turns of the valve handle egulating The regulating stem tip has a gradually tapered tip which allows for greater control of ow. Non-rotating Metal Stem TipA non-rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling in the seat and on the stem tip. As the valve is closed, the stem tip contacts the valve seat, and is driven straight into it without rotating. Vee-Point The vee-point stem tip is usedprovideleak-tightshuto�insmallori�cevalves. PCTFE PCTFEstemtiprequiresa lower seating torque than a metal stem tip. It will provide full ow through the valve with only fewhandleturns.ThePCTFEtipis replaceable and has a maximum temperatureof+250°(+121°C) Non-rotating PCTFE Stem Tipnon-rotatingPCTFEstemtipoperates in the same fashion as the non-rotating metal stem tip but requires less seating torque. 1700 SeriesForged Body, Integral Bonnet Needle ValvesThesea�ordablevalvesaresuitedforwidevarietyofprocesscontrolapplications.Non-rotatingstainlesssteelorreplaceablePCTFEstemtipsreducegalling.Dyna-Pak packing below the stem threads prevents fugitive emissions. Features & Bene tsSafety• LocknutsecurespackingnuttoprohibitaccidentalremovalLong cycle life• Packingbelowstemthreadsprevents�uidfromcontacting the stem threads• Non-rotatinghardened17-4PHstainlesssteel,Monel®orreplaceablePCTFEstemtipiscombinedwithhardened450stainlesssteelorMonel®thread gland to reduce gallingHelps eliminate fugitive emissions• Dyna-Pak®packingprovidesleak-tightsealwithlow operating torqueReliability• Allvalvesaretestedforbubble-tightleakageatboth seat and packingInstallation variety• BroadselectionofmaleNPT,femaleNPT,andHOKE GYROLOKfractionalormetrictube�ttingconnectionsPanel mounting• Panelmountingisstandardonallmodels• SpecialHighToleranceNPTThread Typical Applications• Cylindervalves• Panelboardinstrumentation• Pressuregaugevalves• Samplingsystems• Researchlaboratories• Oxygenservice• CorrosiveorhighpressureserviceTechnical Data BOY*316 stainless steel, MonelXIPERTING RESSURE6000psig70°(414Bar21°C)PERTING PERTURE RANGEMetal stem tip-65°+450°(-54°+232°C)PCTFE stem tip-20°+250°(-29°+121°C)ICE0.187 (4.8mm)v CTOR0.31* Consult factory for other materials needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 6 Materials of Construction DECRIPTION316 STINLE STEELMONEL®Body316 stainless steelMonel®Stem316 stainless steelMonel®Stem tipSoftHardPCTFE17-4PH stainless steelPCTFEMonel®Stem packingTFE/316 stainless steel wafersTFE/Monel®wafersThread gland450 stainless steelMonel®Locknut316 stainless steel316 stainless steelHandle1711 Series1751 SeriesAluminumABSAluminumABSPanel mounting nutNickel-plated brassNickel-plated brass Dimensions1700 Series: Globe Pattern NLET AUTLET B¼ GYROLOK¼ GYROLOKinch¼ male NPT¼ male NPTinch¼ male NPT¼ female NPTinch¼ female NPT¼ female NPTinchGYROLOKGYROLOKinch8mm GYROLOK8mm GYROLOKinch Dimensions for reference only, subject to change. F B H1 D( EH A Sdlodq‘stqdNodq‘shmf Oqdrrtqd ORHF.A@R Panel mounting dimensionsPanel hole = (22.6 mm) diameterPanel thickness = (6.4 mm) maximum Pressure vs. Temperature Curve HOKE Needle Valves 1700 Series 7 Ordering OptionsSpare PartsSparepartsandrepairkitsareavailableforallneedlevalves.Pleasecontactyourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available on special request. Please consult your local HOKE distributor. How to Order: Standard Valves1700 Series: Globe PatternMetalstemtipforserviceto+450°(+232°C)0.187˝(4.7mm)ori�ce/0.31Cv ONNECTIONER BY PART NLETUTLET316 STINLE STEELMONEL®¼ GYROLOK¼ GYROLOK1711G4Y¼ male NPT¼ male NPT1711M4Y1711M4M¼ male NPT¼ female NPT1711L4Y¼ female NPT¼ female NPT1711F4Y1711F4MGYROLOKGYROLOK1711G6Y8mm GYROLOK8mm GYROLOK1711G8YMM1700 Series: Globe PatternPCTFEstemtipforserviceto+250°(+121°C)0.187˝(4.7mm)ori�ce/0.31Cv ONNECTIONER BY PART NLETUTLET316 STINLE STEELMONEL®¼ GYROLOK¼ GYROLOK1751G4Y¼ male NPT¼ male NPT1751M4Y1751M4M¼ male NPT¼ female NPT1751L4Y¼ female NPT¼ female NPT1751F4Y1751F4MGYROLOKGYROLOK1751G6Y8mm GYROLOK8mm GYROLOK1751G8YMM 1711L4Y: Globe pattern 1751G4Y: Globe pattern Flow Curves TE: For applications requiring TPED/PED certi cation, add a CE su x to part number. Example: 1711 G4-CE.ORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. HOKE Needle Valves 1700 Series 2100 SeriesBar Stock, Screwed Bonnet Needle ValvesThis panel mountable, two-piece design is available in globe and angle patterns for exibility of installation. Dyna-Pak®packingprovidesleak-tightsealingwithlowoperatingtorque.OptionalGraph-Lock®packingisavailable for high-temperature applications. The safety back-seating prevents accidental removal of the stem. Features & Bene tsSafety• Backseatingprovidesaddedsealingprotection• LockpinpreventsaccidentalbonnetdisengagementHigh pressure capability• 316stainlesssteelvalvemaximumworkingpressure is 6000 psig (414 Bar)Extended temperature range• ChoiceofDyna-Pak®packingorhightemperatureGraph-Lock®packingVersatile• ChoiceofregulatingstemtipormetalstemwithnonrotatingreplaceablePCTFEstemtip,withvariety of end connectionsReliability• Allvalvesaretestedforbubble-tightleakageatboth seat and packingPanel mounting• Panelmountingisstandardonallmodels• SpecialHighToleranceNPTThread Typical Applications• Hydraulicsystems• Hightemperatureserviceto+600°(+316°C)• Gassampling• TeststandsTechnical Data BOY*316 stainless steel, carbon steel, brassXIPERTING RESSUREStainless steel6000psig70°(414Bar21°C)Carbon steel5000psig70°(345Bar21°C)Brass3000psig70°(207Bar21°C)PERTING PERTURE RANGEDyna-Pak®/Metal stem tip-65°+450°(-54°+232°C)Dyna-Pak®/PCTFE stem tip-20°+250°(-29°+121°C)Graph-Lock®/Metal stem tip-60°600°(-51°316°C)ICE SIZE0.188˝(4.8mm),0.250”(6.4mm),0.313”(8.0mm)v CTOR0.40 to 1.20* Consult factory for other materials needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 9 Materials of Construction DECRIPTIONASS316 STINLE STEELCAON STEEL BodyBrass316 stainless steelCarbonsteel Stem316 stainless steel316 stainless steelCarbonsteelStem tip softPCTFE316 stainless steelPCTFE316 stainless steelPCTFE316 stainless steelStem packing Dyna-Pak®packing High temperature packingTFE/brass wafersTFE/316 stainless steel wafersGraph-Lock®TFEwafersTFE/316 stainless steel wafersGraph-Lock®TFEwafers BonnetBrass316 stainless steelCarbonsteelHandle Valvew/Dyna-Pak®packing Valve w/high temperature packingABS wheel, blackABS wheel, blackAluminum cross, redABS wheel, blackAluminum cross, red Packing nutBrass316 stainless steelCarbonsteel Panel mounting nutNickel-plated brassNickel-plated brassNickel-plated brass Pressure vs. Temperature Curves*Curves for PCTFE stem tip are the same as above but limited to -20° to +250°F (-29° to +121 °C)Regulating stem tip shown HOKE Needle Valves 2100 Series 10 Dimensions2100 Series: Globe Pattern NLET AUTLET BSESOSEMETL ¼ GYROLOK¼ GYROLOKinch ¼ female NPT¼ female NPTinch51GYROLOKGYROLOKinch GYROLOKGYROLOKinch½˝maleNPT½˝femaleNPTinch ½˝femaleNPT½˝femaleNPTinch Dimensions for reference only, subject to change.* Use metal handle dimensions for high temperature, 2118 Series valves.Dimensions for reference only, subject to change.2100 Series: Angle Pattern NLET AUTLET BSESOSE¼ female NPT¼ female NPTinch female NPT female NPTinchPanel mounting dimensionsPanelhole for½˝models \f (19.4 mm) diameterfor all other models = 64” (16.2 mm) diameterPanel thickness = (4.7 mm) maximum D(H H1ABE F Globe pattern FB D( EH H1A Angle pattern How to Order: Standard Valves2100 Series: Globe PatternMetalstemtip;Dyna-Pak®packingforserviceto+450°(+232°C) ONNECTIONER BY PART ICE IN INCNLETUTLETASS316 STINLE STEELCAON STEEL¼ GYROLOK¼ GYROLOK2112G4B2112G4Y0.1880.40¼ female NPT¼ female NPT2112F4B2112F4Y2112F4E0.1880.40GYROLOKGYROLOK2112G6Y0.2500.70 female NPT female NPT2112F6B2112F6Y0.2500.70GYROLOKGYROLOK2112G8Y0.3131.20½˝maleNPT½˝femaleNPT2112L8Y0.3131.20½˝femaleNPT½˝femaleNPT2112F8B2112F8Y2112F8E0.3131.202100 Series: Globe PatternMetalstemtip;Graph-Lock®hightemperaturepackingforserviceto+600°(+316°C) ONNECTIONER BY PART ICE IN INCNLETUTLET316 STINLE STEELCAON STEEL¼ GYROLOK¼ GYROLOK2118G4Y0.1880.40¼ female NPT¼ female NPT2118F4Y2118F4E0.1880.40 female NPT female NPT2118F6Y0.2500.70½˝femaleNPT½˝femaleNPT2118F8Y2118F8E0.3131.20 2118G4Y: Globe patternORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. HOKE Needle Valves 2100 Series 11 Ordering OptionsSpare PartsSparepartsandrepairkitsareavailableforallneedlevalves.Pleasecontactyourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available upon special request. Please consult your local HOKE distributor.2100 Series: Globe PatternPCTFEstemtip;Dyna-Pak®packingforserviceto+250°(+121°C) ONNECTIONER BY PART ICE IN INCNLETUTLETASS316 STINLE STEEL¼ female NPT¼ female NPT2152F4Y0.1880.40½˝femaleNPT½˝femaleNPT2152F8B2152F8Y0.3131.202100 Series: Angle PatternMetalstemtip;Dyna-Pak®packingforserviceto+450°(+232°C) ONNECTIONER BY PART ICE IN INCNLETUTLETASS316 STINLE STEEL¼ female NPT¼ female NPT2122F4Y0.1880.40 female NPT female NPT2122F6B0.2500.70 2122F4Y: Angle pattern HOKE Needle Valves 2100 Series Features & Bene tsSafety• LockpinpreventsaccidentalbonnetdisengagementDurability• Hastelloy®C-276stemtipprovideslongservicelifeExtended temperature range• Dyna-Pak®packingReliability• Allvalvesaretestedforbubble-tightleakageatboth seat and packingExtended cycle life• Dyna-Pak®packingbelowstemthreadspreventswashing away of thread lubricant and contamination of process uidInstallation variety• ChoosefrombroadselectionofmaleNPT,femaleNPT and HOKE GYROLOKtube�ttingconnections in globe or angle patternsPanel mounting• Panelmountingisstandardonallmodels• SpecialHighToleranceNPTThread Typical Applications• Corrosivehandling• Samplingsystems• MeteringserviceTechnical Data Y*316 stainless steelXIPERTING RESSURE5000psig70°(345Bar21°C)PERTING PERTURE RANGE-65°+450°(-54°+232°C)ICE SIZE0.086 to 0.313 (2.2 mm to 8.0 mm)v CTOR0.12 to 1.40* Consult factory for other materials2200 SeriesBar Stock, Screwed Bonnet Needle ValvesDyna-Pak®packingbelowthestemthreads,hardenedthreadglandandHastelloy®C-276stemtipkeepvalves leak-tight while providing long cycle life. A choice of two ow capabilities enables use in a variety of severe service applications. needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 13 Materials of Construction DECRIPTIONMATERIBody316 stainless steelStem316 stainless steelStem tipHastelloy®C-276Stem packingTFE/316 stainless steel wafersBonnet316 stainless steelThread gland416 stainless steelHandle2210, 2220 Series2230 SeriesAluminum cross, redABSPanel mounting nutNickel-plated brass DimensionsDimensions for reference only, subject to change.2200 Series: Globe Pattern NLET AUTLET B¼ GYROLOK¼ GYROLOKinch ¼ female NPT¼ female NPTinch 51GYROLOKGYROLOKinch female NPT female NPTinch 51GYROLOKGYROLOKinch ½˝maleNPT¼ female NPTinch ½˝femaleNPT½˝femaleNPTinch 10mm GYROLOK10mm GYROLOKinch 12mm GYROLOK12mm GYROLOKinch Dimensions for reference only, subject to change.2200 Series: Angle Pattern NLET AUTLET B¼ female NPT¼ female NPTinchPanel mounting dimensionsPanelhole: for½˝models \f (19.4 mm) diameterfor all other models = 64” (16.2 mm) diameterPanel thickness = (4.7 mm) maximum D(H H1ABE F Globe patternAngle pattern FB D( EH H1A HOKE Needle Valves 2200 Series 14 Sdlodq‘stqdNodq‘shmf Oqdrrtqd ORHF.A@R G‘mckd Stqmr ur Bu Mtladq ne Stqmr ne U‘kud G‘mckdMtladq ne Stqmr ne U‘kud G‘mckd G‘mckd Stqmr ur Bu Mnsd9 Ldsdqhmf q‘mfd ne u‘kud hr vhsghm sgd ehqrs 4 g‘mckd stqmr- G‘mckd Stqmr ur BuMtladq ne Stqmr ne U‘kud G‘mckd G‘mckd Stqmr ur BuMtladq ne Stqmr ne U‘kud G‘mckd Flow Curves Pressure vs. Temperature Curve HOKE Needle Valves 2200 Series 15 Ordering OptionsSpare PartsSparepartsandrepairkitsareavailableforallneedlevalves.Pleasecontactyourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available on special request. Please consult your local HOKE distributor.2200 Series: Globe PatternBlunt vee-point stem tip ONNECTIONER BY PART ICE INCNLETUTLET316 STINLE STEEL¼ GYROLOK¼ GYROLOK2215G4Y0.1880.40¼ female NPT¼ female NPT2215F4Y0.1880.50GYROLOKGYROLOK2215G6Y0.2500.76 female NPT female NPT2215F6Y0.2500.90GYROLOKGYROLOK2215G8Y0.2500.90½˝maleNPT¼ female NPT2215L84Y0.1880.50½˝femaleNPT½˝femaleNPT2215F8Y0.3131.4010mm GYROLOK10mm GYROLOK2215G10YMM0.2500.9012mm GYROLOK12mm GYROLOK2215G12YMM0.2500.902200 Series: Globe PatternRegulatingstemtip ONNECTIONER BY PART ICE INCNLETUTLET316 STINLE STEEL¼ female NPT¼ female NPT2232F4Y0.0860.122200 Series: Angle PatternBlunt vee-point stem tip ONNECTIONER BY PART ICE INCNLETUTLET316 STINLE STEEL¼ female NPT¼ female NPT2225F4Y0.1880.55 How to Order: Standard Valves 2215G6Y: Globe pattern 2225F4Y: Angle pattern Regulating stem tip (for greater control of ow) Blunt vee-point tip (full ow with only a few handle turns)ORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. HOKE Needle Valves 2200 Series 2219 SeriesSevere Service Needle ValvesThe new HOKE 2219 Needle Valve is an excellent choice for many steam- and severeserviceapplications.Grafoil®packingbelowthestemthreadsprovidesexceptionalserviceattemperaturesupto+1000°(+538°C).Thenon-rotating 316 stainless steel stem tip prevents galling. Features & Bene ts• MeetsANSI900#speci�cations• Grafoil®packingbelowthreadsisolatesthreadsfrom media.• Non-rotating316stainlesssteelstemtippreventsgalling• Highpressurehightemperatureuse• Allstandardcomponentsare316stainlesssteel• Standard316stainlesssteelcasthandle• Fractionalendconnectionsavailableupto1”;metric end connections up to 25 mmGYROLOK, female NPT, NPS-, or tube socket weld end connections• Bubble-tightleaktestingatbothseatandpacking• SpecialHighToleranceNPTThread Typical Applications• Steamserviceinpowerplants• Hotcondensates Technical Data BOY MTERI316 stainless steel, carbon steel, Hastelloy®276,andMonel®MAXI OPERTING PRESSURE6000psig70°(414Bar21°C)PROO PRESSURE SAFETY CTOR2:1BURT RESSURE4:1TEPERTURE RANGE-100° F to + 1000° F @ 1750 psig max.(-75°to538°120barmax.)ORIICE IZE0.170”,0.250”,0.312”,and0.437”(4.3 mm, 6.4 mm, 7.9 mm, and 11.1 mm)CTOR0.47, 1.09, and 1.20factorfor0.437”ori�cenotavailableattimeofpublication needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 17 Materials of Construction* DECRIPTIONMATERIHandle316 stainless steelStem assembly316 stainless steelPacking nut316 stainless steelBody316 stainless steelPackingGrafoil®Packing washer316 stainless steel* This listing contains standard valve information only. See page 19 for a complete list of options. Dimensions for reference only, subject to change. NLET AUTLET BICE SIZE¼ female NPT¼ female NPT0.250”(6.4 mm)inch3.42.632.25N/A86.466.857.2N/A½˝femaleNPT½˝femaleNPT0.312”(7.9 mm)inch3.42.632.51N/A86.466.863.8N/A¾˝femaleNPT¾˝femaleNPT0.437”(11.1 mm)inch3.552.633.50N/A89.666.888.9N/A1 female NPT1 female NPT0.437”(11.1 mm)inch3.592.634.25N/A91.366.8108.0N/A¼ GYROLOK¼ GYROLOK0.170”(4.3 mm)inch3.42.631.873.1586.466.847.480.1GYROLOKGYROLOK0.250”(6.4 mm)inch3.42.631.503.4386.466.838.187.1GYROLOKGYROLOK0.437”(11.1 mm)inch3.532.632.884.8789.766.873.2123.81 GYROLOK1 GYROLOK0.437”(11.1 mm)inch3.532.632.515.0089.766.863.8120.912 mm GYROLOK12 mm GYROLOK0.250”(6.4 mm)inch3.402.631.513.3686.466.838.585.422 mm GYROLOK22 mm GYROLOK0.437”(11.1 mm)inch3.532.632.764.8689.766.870.1123.325 mm GYROLOK25 mm GYROLOK0.437”(11.1 mm)inch3.532.632.515.1189.766.863.8129.7 tube socket weld tube socket weld0.250”(6.4 mm)inch3.42.631.942.4486.466.849.362.0½”tubesocketweld½”tubesocketweld0.250”(6.4 mm)inch3.402.631.942.4486.466.849.362.0¾”tubesocketweld¾”tubesocketweld0.437”(11.1 mm)inch3.532.632.503.5089.766.863.588.91”tubesocketweld1”tubesocketweld0.437”(11.1 mm)inch3.532.632.503.5089.766.863.588.9 NPS socket weld NPS socket weld0.250”(6.4 mm)inch3.42.632.012.5156.466.851.0563.8½˝NPSsocketweld½˝NPSsocketweld0.312”(7.9 mm)inch3.42.631.752.5186.466.844.4563.8¾”NPSsocketweld¾”NPSsocketweld0.437”(11.1 mm)inch3.532.632.503.5089.766.863.588.91”NPSsocketweld1”NPSsocketweld0.437”(11.1 mm)inch3.592.632.503.5091.366.863.588.9 Dimensions ‘C’Fxqnknj®‘B’‘@’‘A’ 18 Pressure vs. Temperature Curve Flow Curves HandleTurnsvs. * Data for 0.437” orice not available at time of publication 2219 Series Severe Service Needle Valves 2219 Series Severe Service Needle Valve 19 How to Order: Build-to-OrderVALVE SERIESETRICMMSpecify for GYROLOK metric only*(fractional sizes leave blank)BASIC MATERIALE CarbonsteelHC Hastelloy®C-276M Monel®Y 316 stainless steel (standard)CONNECTION TYPE & SIZEF4 ¼ Female NPT inlet/outletF6 3/8 Female NPT inlet/outletF8 1/2 Female NPT inlet/outlet3/4 Female NPT inlet/outletF16 1”/FemaleNPTinlet/outletG4¼ GYROLOK inlet/outletG63/8 GYROLOK inlet/outletG81/2 GYROLOK inlet/outletG123/4 GYROLOK inlet/outletG1212 mm GYROLOK inlet/outletG16 1”GYROLOK inlet/outletG2222 mm GYROLOK inlet/outletG2525 mm GYROLOK inlet/outletN6 3/8 Tube socket weld inlet/outletN8 1/2 Tube socket weld inlet/outletN123/4 Tube socket weld inlet/outletN16 1”Tubesocketweldinlet/outletP6 3/8 NPS pipe socket weld inlet/outletP8 1/2 NPS pipe socket weld inlet/outletP123/4 NPS pipe socket weld inlet/outletP16 1”NPSpipesocketweldinlet/outlet 2219F8 * Consult factory for metric connections and additional material options.GYROLOK is a registered trademark of HOKE, Inc. www.HOKE.comGrafoil® is a registered trademark of Union Carbide Corp.www.unioncarbide.comHastelloy® is a registered trademark of Haynes International, Inc.www.haynesintl.comMonel® is a registered trademark of Special Metals Corporation.www.specialmetals.com For Your SafetyItissolelytheresponsibilityofthesystemdesignerandusertoselectproductssuitablefortheirspeci�capplicationrequirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can causepersonalinjurypropertydamage. 2700 SeriesBar Stock, Screwed Bonnet Needle Valves for Sour Gas Service Features & Bene tsSafety• LockpinsecurespackingnutagainstaccidentalremovalSour gas service• Materialso�ercorrosion-resistantpropertieswherehydrogensul�deispresent.Corrosion resistance• Allwettedpartsconstructedofhighchrome,highnickel austenitic stainless steel provide uniform chemical corrosion propertiesHelps eliminate fugitive emissions• Dyna-Pak®packingbelowthestemthreadsprevents uid from contacting stem threadsExtended cycle life• Nonrotating17-4PHstainlesssteelstemtipandXM-19 stainless steel stem prevent gallingReliability• Allvalvesaretestedforbubble-tightleakageatboth seat and packing• SpecialHighToleranceNPTThread Typical Applications• Re�neries• Chemicalprocessing• OilandgasexplorationTechnical Data BO316 stainless steelXIPERTING RESSURE6000psig70°(414Bar21°C)PERTING PERTURE RANGE-65°+450°(-54°+232°C)ICE0.187 (4.8 mm)v CTOR0.60ONNECTION½˝female½˝femaleNPTFeaturing packing below the stem threads, nonrotating metal stem tip, hardened thread gland and a 316stainless steel body, these valves are well suited for sour gas applications as well as other severe service applications. needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 21 Materials of Construction DECRIPTIONTERIBody316 stainless steelStemXM-19 stainless steelStem tip17-4PH stainless steelStem packingTFE/316 stainless steel wafersBonnetXM-19 stainless steelLocknut316 stainless steelHandleAluminumPacking nutXM-28 stainless steel DimensionsDimensions for reference only, subject to change.2700 Series: Globe Pattern NLET AUTLET B½˝maleNPT½˝femaleNPTinch½˝femaleNPT½˝femaleNPTinch FB D( EHA 00000012345HTuNTuVaC Flow Curve HOKE Needle Valves 2700 Series 22 Ordering OptionsSpare PartsSparepartsandrepairkitsareavailableforallneedlevalves.Pleasecontactyourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available on special request. Please consult your local HOKE distributor.2700 Series: Globe Pattern17-4PH stainless steel stem tip0.187˝(4.7mm)ori�ce/0.60Cv ONNECTIONER BY PART ER*NLETUTLET316 STINLE STEEL½˝maleNPT½˝femaleNPT2732L8YX½˝femaleNPT½˝femaleNPT2732F8YX* It is the end-user’s responsibility to determine if this product is compatible with their sour gas application. Contact HOKE for information concerning properties. How to Order: Standard Valves 2732L8Y: Globe pattern °F°C--0-13293456OATe536442322116 Pressure vs. Temperature CurveORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. HOKE Needle Valves 2700 Series 2800 SeriesForged Body, Union Bonnet Needle ValvesFor the most severe service applications, these valves feature a stem backseat for safety, a long cycle life with hightemperaturecapabilityto700°(370°C),andunionbonnetforsafe,convenientmaintenance. Features & Bene tsSafety• Integralstembackseat• UnionbonnetdesignHigh temperature service• Grafoil®packingringlocatedbelowstemthreadsextendsserviceto700°(370°C)Extended cycle life• 17-4PHstainlesssteelhardenedstemwithdry�lmlubricant on threads and hardened thread gland for increased thread life• NonrotatinghardenedstemtippreventsgallingReliability• Allvalvesaretestedforbubble-tightleakageatboth seat and packingInstallation variety• ChoiceofHOKEGYROLOKtube�ttings,femaleNPT, or tube socket weld connectionsPanel mounting• Panelmountingisstandardonallmodels• SpecialHighToleranceNPTThread Typical Applications• Hightemperatureserviceto700°(370°C)• Corrosivehandling• ReactiveandhotcondensatesTechnical Data BO316 stainless steelXIPERTING RESSUREGrafoil® packing:4000psig70°(276Bar21°C)2500psig700°(172Bar370°C)Dyna-Pak® packing:5000psig70°(345Bar21°C)PERTING PERTURE RANGEGrafoil® packing-100°+700°(-75°+370°C)Dyna-Pak® packing-40°+450°(-40°+232°C)ICE0.312 (7.9 mm)v CTOR1.10 needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 24 Materials of Construction DECRIPTIONMATERIBody316 stainless steelStem17-4PH stainless steelStem tip17-4PH stainless steelStem packingGrafoil®packingDyna-Pak®packingGrafoil®TFE/316 stainless steel waferRinggland316 stainless steelThread gland416 stainless steelHousingXM-19 stainless steelAdapter nut316 stainless steelHandle316 stainless steel10Packing nut316 stainless steelPanel mounting nut316 stainless steel Dimensions NLET A UTLET B¼ GYROLOKinch 121GYROLOKinch 121 socket weldinch 121GYROLOKinch 121½˝femaleNPTinch 121½˝socketweldinch 121Dimensions for reference only, subject to change. FB D( EH H1A 2800 SeriesPanel mountingPanel hole = 1 (30.2 mm) diameterPanel thickness = (4.7 mm) maximum Curves HOKE Needle Valves 2800 Series 25 Ordering OptionsSpare PartsSparepartsandrepairkitsareavailableforallneedlevalves.Pleasecontactyourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available on special request. Please consult your local HOKE distributor. How to Order: Standard Valves2800 Series Globe PatternMetalstemtip;Dyna-Pak®packingforserviceto+450° F(232°C)at1800psi0.312˝ori�ce/1.10Cv ONNECTIONER BY PART NLET UTLET316 STINLE STEEL½˝femaleNPT2813F8YGYROLOK2813G8Y2800 Series Globe PatternMetalstemtip;Grafoil®packingforserviceto+700° F(371°C)at2500psi0.312˝ori�ce/1.10Cv ONNECTIONER BY PART NLET UTLET316 STINLE STEEL¼ GYROLOK2811G4YGYROLOK2811G6Y socket weld2811N6YGYROLOK2811G8Y½˝femaleNPT2811F8Y½˝socketweld2811N8Y 2811G8Y: Globe pattern 2813F8Y: Globe patternORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. HOKE Needle Valves 2800 Series 3700, 3800, 3900 SeriesForged Body, Integral Bonnet Needle ValvesO�eredinfourdi�erentbodymaterials,thisgroupofvalvescanhandlewiderangeofgeneralpurposeliquidand gas applications. Six types of stem tips are available, including two styles of vee-points. Features & Bene tsSafety• Integralbonnetprovidesdi�erentialthreadpitchbetween stem threads and packing nut thread preventing accidental stem removalStem tip options• AchoiceofPCTFE,metal,vee-point,bluntvee-point, or regulating stem tipsHelps eliminate fugitive emissions• Dyna-Pak®packingprovidesleak-tightsealwithlow operating torque in deep vacuum or high pressure applicationsDependability• Allvalvesaretestedforbubble-tightleakageatboth seat and packingInstallation variety• BroadselectionofmaleNPT,femaleNPT,andHOKE GYROLOKfractionalormetrictube�ttingconnectionsHandle options• Color-codedhandlesareavailableforidentifyingsystem uidsPanel mounting available• AllmodelscanbeorderedforpanelmountingEasy maintenance• Allmodelscanbepanelmountedwithoutpackingdisruption.Packingcanbeadjustedwithoutremoval from panel• SpecialHighToleranceNPTThread Typical Applications• Instrumentlines• Sampling• Gaschromatography• Teststands• CylindervalvesTechnical Data Y*316 stainless steel, Monel®, carbon steel, brassXIPERTING RESSURE316 stainless steel, Monel®, carbon steel5000psig70°(345Bar21°C)Brass3000psig70°(207Bar21°C)PERTING PERTURE RANGEMetal stem tip-65°+450°(-54°+232°C)PCTFE stem tip-20°+250°(-29°+121°C)ICE SIZE0.060 to 0.312 (1.5 mm to 7.9 mm)v CTOR0.07 to 1.10* Consult factory for other materials needle valves HOKE Inc.PO Box 4866 • Spartanburg, SC 29305-4866Phone (864) 574-7966 Fax (864) 587-5608www.hoke.com • Sales-hoke@circor.com 27 DECRIPTIONASS316 INLE STEELCAON STEELMONEL®BodyBrass316 stainless steelCarbonsteelMonel®Stem316 stainless steel316 stainless steel316 stainless steelMonel®Stem tipsoftPCTFE17-4PH stainless steelPCTFE17-4PH stainless steelPCTFE17-4PH stainless steelPCTFEMonel®Stem packingTFE/brass wafersTFE/316 stainless steel wafersTFE/316 stainless steel wafersTFE/Monel®wafersHandleABSABSABS/aluminumABSPanel mounting nutNickel-plated brassNickel-plated brassNickel-plated brassNickel-plated brass Materials of Construction Pressure vs. Temperature Curves Flow CurvesShown with regulating stem tip 28 Dimensions3700 Series: Globe PatternVee-point stem tip NLET AUTLET B male NPT male NPTinch 10¼ GYROLOK¼ GYROLOKinch 10¼ male NPT¼ male NPTinch 103700 Series: Globe PatternRegulatingandPCTFEstemtips NLET AUTLET B * *GYROLOKGYROLOKinch \f male NPT male NPTinch 10 male NPT female NPTinch 10 female NPT female NPTinch 10¼ GYROLOK¼ GYROLOKinch 10¼ male NPT¼ GYROLOKinch 10¼ male NPT¼ male NPTinch 51103mm GYROLOK3mm GYROLOKinch \f 6mm GYROLOK6mm GYROLOKinch 108mm GYROLOK8mm GYROLOKinch 10Dimensions for reference only, subject to change. and H for valves with panel mounting. FB D EH A 3700/3800 Series globe pattern3700/3800 Series globe patternwith D Style panel mounting FB D1 EH H1A 3700 Series: Angle PatternRegulatingandPCTFEStems NLET AUTLET B * *GYROLOKGYROLOKinch male NPT male NPTinch female NPT female NPTinch male NPT¼ GYROLOKinch \f ¼ GYROLOK¼ GYROLOKinch \f ¼ male NPT¼ GYROLOKinch \f ¼ male NPT¼ male NPTinch 6mm GYROLOK6mm GYROLOKinch FB D EHA 3700/3800 Series angle patternDimensions for reference only, subject to change.Dimensions for reference only, subject to change. and H for valves with panel mounting. 29 Dimensions FB D EHA 3900 Series globe pattern3700/3800 Series angle patternwith P-style panel mounting FB D EHH1A FB D EHA 3700/3800 Series angle pattern3800 Series: Angle PatternRegulatingandPCTFEstemtips NLET AUTLET B * *¼ male NPT¼ female NPTinch ¼ female NPT¼ female NPTinch male NPT¼ female NPTinch 3900 Series: Globe PatternRegulatingandPCTFEstemtips NLET AUTLET B *METL STEPCTSTEGYROLOKGYROLOKinch \f ½˝femaleNPT½˝femaleNPTinch \f 3800 Series: Globe PatternRegulatingandPCTFEstemtips NLET AUTLET B * *METL STEPCTSTE¼ male NPT¼ female NPTinch ¼ female NPT¼ female NPTinch ¼ male NPTGYROLOKinch GYROLOKGYROLOKinch male NPT male NPTinch GYROLOKGYROLOKinch 10mm GYROLOK10mm GYROLOKinch 12mm GYROLOK12mm GYROLOKinch Dimensions for reference only, subject to change. and H for valves with panel mounting.Dimensions for reference only, subject to change. and H for valves with panel mounting.Dimensions for reference only, subject to change. and H for valves with panel mounting. 30 How to Order: Standard Valves 3712G4B: Globe pattern 3722G4B: Angle pattern3700 Series: Globe PatternVee-point stem0.060˝(1.5mm)ori�ce/0.07Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL male NPT male NPT3732M2B¼ GYROLOK¼ GYROLOK3732G4Y¼ male NPT¼ male NPT3732M4B3732M4Y3700 Series: Globe PatternRegulatingstemtip0.170˝(4.3mm)ori�ce/0.35Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELMONEL®GYROLOKGYROLOK3712G2B3712G2Y male NPT male NPT3712M2B3712M2Y female NPT female NPT3712F2B3712F2Y¼ GYROLOK¼ GYROLOK3712G4B3712G4Y3712G4M¼ male NPT¼ GYROLOK3712H4B3712H4Y3712H4M¼ male NPT¼ male NPT3712M4B3712M4Y3mm GYROLOK3mm GYROLOK3712G3YMM6mm GYROLOK6mm GYROLOK3712G6YMM8mm GYROLOK8mm GYROLOK3712G8YMM3700 Series: Globe PatternPCTFEstemtip0.170˝(4.3mm)ori�ce/0.40Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELMONEL®GYROLOKGYROLOK3752G2Y female NPT female NPT3752F2B3752F2Y¼ GYROLOK¼ GYROLOK3752G4B3752G4Y3752G4M¼ male NPT¼ GYROLOK3752H4B3752H4Y¼ male NPT¼ male NPT3752M4B3752M4Y3mm GYROLOK3mm GYROLOK3752G3YMM6mm GYROLOK6mm GYROLOK3752G6YMM8mm GYROLOK8mm GYROLOK3752G8YMM3700 Series: Angle PatternRegulatingstemtip0.170˝(4.3mm)ori�ce/0.35Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELGYROLOKGYROLOK3722G2Y male NPT male NPT3722M2B female NPT female NPT3722F2B male NPT¼ GYROLOK3722H24B¼ GYROLOK¼ GYROLOK3722G4Y¼ male NPT¼ GYROLOK3722H4B3722H4Y¼ male NPT¼ male NPT3722M4B3722M4Y6mm GYROLOK6mm GYROLOK3722G6YMM3700 Series: Globe PatternBlunt vee-point stem0.170˝(4.3mm)ori�ce/0.40Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL male NPT male NPT3742M2B3742M2Y female NPT female NPT3742F2B3742F2Y¼ GYROLOK¼ GYROLOK3742G4B3742G4Y¼ male NPT¼ male NPT3742M4B3742M4YORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. 31 How to Order: Standard Valves3700 Series: Angle PatternPCTFEstemtip0.170˝(4.3mm)ori�ce/0.40Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL¼ GYROLOK¼ GYROLOK3762G4Y¼ male NPT¼ GYROLOK3762H4B3762H4Y¼ male NPT¼ male NPT3762M4B3762M4Y6mm GYROLOK6mm GYROLOK3762G6YMM3800 Series: Globe PatternRegulatingstemtip0.219˝(5.6mm)ori�ce/0.55Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELMONEL®¼ male NPT¼ female NPT3812L4B3812L4Y¼ female NPT¼ female NPT3812F4B3812F4Y¼ male NPTGYROLOK3812H46B3812H46Y3812H46MGYROLOKGYROLOK3812G6B3812G6Y3812G6M male NPT male NPT3812M6B3812M6YGYROLOKGYROLOK3812G8B3812G8Y3812G8M10mm GYROLOK10mm GYROLOK3812G10YMM12mm GYROLOK12mm GYROLOK3812G12YMM3800 Series: Globe PatternVee-point stem tip0.219˝(5.6mm)ori�ce/0.55Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELGYROLOKGYROLOK3842G6B3842G6YGYROLOKGYROLOK3842G8B3842G8Y3800 Series: Globe PatternPCTFEstemtip0.170˝(4.3mm)ori�ce/0.40Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL¼ male NPT¼ female NPT3852L4Y¼ female NPT¼ female NPT3852F4B3852F4YGYROLOKGYROLOK3852G6Y male NPT male NPT3852M6YGYROLOKGYROLOK3852G8Y10mm GYROLOK10mm GYROLOK3852G10YMM12mm GYROLOK12mm GYROLOK3852G12YMM3800 Series: Angle PatternRegulatingstemtip0.170˝(4.3mm)ori�ce/0.55Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL¼ male NPT¼ female NPT3802L4Y¼ female NPT¼ female NPT3802F4B3802F4Y male NPT¼ female NPT3802L64Y3800 Series: Angle PatternPCTFEstemtip0.170˝(4.3mm)ori�ce/0.55Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEEL¼ male NPT¼ female NPT3862L4Y¼ female NPT¼ female NPT3862F4B3862F4Y male NPT¼ female NPT3862L64Y 3862L4Y: Angle pattern 3812F4Y: Globe patternwith D-style panel mounting ORYOUR SAFETYIT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. 32 Ordering Options Handle ptions*To order a plug button, specify a part number from below. OLOR3712, 3722, 3732, 3742, 3752, 3762, 3802, 3852, 3862 SERIE3812, 3842, 3952 SERIERed94312–00294349–002Green94312–00394349–003Yellow94312–00494349–004Orange94312–00594349–005Brown94312–00694349–006Blue94312–00794349–007* 3912 series is not available with plug button-ring PackingO-ring packing is available for all 3700 and 3800 Series valves. For Buna-N oring packing,specifykitnumber3700K1.ForViton®o-ringpacking,specifykitnumber3700K2. For additional o-ring options, contact your local HOKE distributor.Panel Mounting3700 & 3800 SeriesD-styleHOKE’sfactory-installedpanelmountingpermitsvalveinstallationwithoutdisruptingthepacking.Inaddition,futurepackingadjustmentsmaybeperformedwhilethevalveismounted.Factory-installedpanelmountD-styleisavailableforall models except the 3732 Series (globe pattern, vee-point stem). To order, add a ‘D’pre�xtothemodelnumber(e.g.,D3712G4Y)P-stylePanelmountingkitsmaybe�eldinstalledonall3700and3800Seriesvalves (including the 3732 Series). Once the kit is in place, valves may be mounted withoutdisruptingthepacking.Allfuturepackingadjustmentsmustbeperformedwith the valve removed from the panel. To order, specify part number 306–86A, which contains one kit.Panel mounting dimensions for 3700 & 3800 SeriesPanel hole = (16.2 mm) diameter D-style panel mounting P-style panel mounting kits3900 Series: Globe Pattern*Regulatingstemtip0.312˝(7.9mm)ori�ce/1.1Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELCAON STEELGYROLOKGYROLOK3912G8Y½˝femaleNPT½˝femaleNPT3912F8B3912F8Y3912F8E * 3912 series only available with metal handle3900 Series: Globe PatternPCTFEstemtip0.312˝(7.9mm)ori�ce/1.1Cv ONNECTIONER BY PART NLETUTLETASS316 STINLE STEELCAON STEELGYROLOKGYROLOK3952G8Y½˝femaleNPT½˝femaleNPT3952F8B3952F8Y3952F8E 3952F8Y: Globe pattern How to Order: Standard Valves P-style panel mountingOKE Needle Valves Panel thickness = (4.7 mm) maximum3900 SeriesP-stylepanelmountingkitsfor�eldinstallationareavailable.Toorder,specify kit number 3900K1Panel mounting dimensions for 3900 SeriesPanel hole = \f (19.4 mm) diameterPanel thickness = (7.9 mm) maximumSpare PartsSpare parts and repair kits are available for all needle valves. Please contact yourdistributorforspeci�cinformation.Cleaning and TestingWhen ordering, please specify if oxygen cleaning or helium leak testing is required.Additional SizesAdditional sizes and options are available on special request. Please consult your local HOKE distributor.Grafoil® is a registered trademark of UCAR Carbon Company, Inc.www.ucar.comGRAPH-LOCK® is a registered trademark of Garlock Sealing Technologies.www.garlock.comGYROLOK and Dyna-Pak® are registered trademarks of HOKE Incorporated.www.hoke.comHastelloy® is a registered trademark of Haynes International, Inc.www.haynesintl.comMonel® is a registered trademark of Special Metals Corporation.www.specialmetals.comViton® is a registered trademark of DuPont Dow Elastomerswww.dupontelastomers.com For Your SafetyItissolelytheresponsibilityofthesystemdesignerandusertoselectproductssuitablefortheirspeci�capplicationrequirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can causepersonalinjurypropertydamage. OKE Needle Valves Notes OKE Needle Valves Notes OKE Needle Valves Notes Proudly Distributed By: CIRCOR Instrumentation Technologies (CIT) is the logical choice for uid control solutions. We provide the lowest cost of ownership, o ering the best in class reliability and availability of our products. We have global coverage, delivering value in the form of local, exible service to meet our customer’s needs. CIT is a product group specializing in instrumentation with ori ce sizes typically up to 2”.PO Box 4866Spartanburg, SC 29305-4866Tel +1-864-574-7966Fax +1-864-587-5608www.hoke.comSales-hoke@circor.comOur headquarters and ISO 9001:2008 certi ed manufacturing facilities are located at405 Centura CourtSpartanburg, SC, USA, 29303-6603 HOKE Needle Valves Needle Valves at a Glance 2219 Series Severe Service Needle Valves 2219 Series Severe Service Needle Valve HOKE Needle Valves 3700, 3800, 3900 Series HOKE Needle Valves 3700, 3800, 3900 Series