CongratulationsCongratulations on purchasing yournew Vulu Booster seat WARNINGS TO PREVENT SERIOUS INJURY OR DEATH FROM SLIDING OUT FALLS OR TIPPING OVER WARNING Care Maintenance ID: 838831
Download Pdf The PPT/PDF document "Read all instructions BEFORE assembly an..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 Read all instructions BEFORE assembly an
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.www.lovencare.com.au CongratulationsCongratulations
2 on purchasing yournew Vulu Booster seat
on purchasing yournew Vulu Booster seat. WARNINGS TO PREVENT SERIOUS INJURY OR DEATH FROM SLIDING OUT, FALLS, OR TIPPING OVER: WARNING: Ca
3 re & Maintenance! Sponge clean only. 
re & Maintenance! Sponge clean only. When not in use, make sure booster seat is dry and leave in a dry area. To wash fabric seat, with
4 cold water and mild soap. Air dry. Warra
cold water and mild soap. Air dry. Warranty against defects You are entitled to a replacement or refund for a major failure and for compensati
5 on for any other If you are unable to re
on for any other If you are unable to return the item to the store of purchase, you can contact love n care on freecall Love N Care Pty LtdEm
6 ail: info@lovencare.com.auWeb: www.loven
ail: info@lovencare.com.auWeb: www.lovencare.com.auFax: 02 9774 4633 PartsWhat should be included in the box. A Seat CushionSnack Tray Assembl
7 y to remove CLICK Assembly Back Strap As
y to remove CLICK Assembly Back Strap Assembly.1. Wrap the straps around the desired seat,until the buckles meet and click into place.to ensur
8 e the straps are not a hazard. Back Stra
e the straps are not a hazard. Back StrapBottom StrapBottom Strap Assembly.1. Wrap the straps around the bottom of the seat,until the buckles
9 meet and click into place. CLICK Assembl
meet and click into place. CLICK AssemblyBefore assembling onto a seat the minimum size of the seat is as below.453mm 365mm Assembly rotate 90
10 degreesrotate 90 degreesSeat rotationTo
degreesrotate 90 degreesSeat rotationTo rotate the seat press the button located on the front of the seat and turn to the desired direction.
11 AssemblyHarness Assemblyand right side s
AssemblyHarness Assemblyand right side strap buckles into the crotch USE T+,S +ARNESS AT A// T,MESWARN,N* 6 months - 12 monthsRecommended Usag
12 e - stages6 months - 18 months12 months
e - stages6 months - 18 months12 months - 36 monthsFully AssembledRemove front TrayRemove cushion and TrayStage 1Stage 2Stage 3 6 R 1 R Contac