C_THR89_2205 - SAP Certified Application Associate - SAP SuccessFactors Workforce Analytics - PDF document

Online Learning SAP Certified Application Associate - SAP SuccessFactors Workforce Analytics & Planning Functional Consultant 1H/2022 Preparation Dumps Get your required dump now: https://certsgot.com/product/dumps - c_thr89_2205 - sap - certified - application - associate - sap - successfactors - workforce - analytics - planning - functional - consultant - 1h - 2022/ Copy Paste The Above URL To Get The Dump Related Information We can have one sub interface using the IP address space of VLAN 10, and another sub interface using the IP address space of VLAN 20. So if I wanted to go from the computer on the bottom left to the computer on the right, here’s what would happen: That packet would flow into the switch , down to the router, back to the switch, and out a VLAN 20 port to our other computer, all while being routed through a layer to the switch. However, there are some switches out there called multilayer switches, or sometimes they’re called layer three swi tches. Those types of switches have routing capabilities built in. They can do routing without having to go out over a trunk connection and connect to an external router. They can do routing internally. But I want you to understand from this video that we can take the ports showing up on our switch and carve them into different subnets, different VLANs, which are different broadcast domains. Let’s say that we have a couple of Ethernet switches, each of which has two VLANs created. We’ve got a VLAN for sales , we’ve got a VLAN for engineering, and maybe on the top switch we have a sales PC connected to the sales VLAN indicated with the blue highlight. And we’ve got an engineering PC connected to the engineering VLAN indicated by the yellow highlight. And the s ales PC, you guessed it, wants to go to the sales server, and the engineering PC wants to go to the engineering server. And we want to do this without routing. We want to be in the same broadcast domain. And let’s assume that these are layer - two switches. They’re not going to be doing routing. How can we interconnect the Sales VLANs on these two switches and the Engineering VLANs such that the Sales PC gets to the Sales Server and the Engineering PC gets to the Engineering Server? Well, one option is to hav e a connection from the Sales VLAN on the top switch down to a vacant port in the Sales VLAN on the bottom switch. And for Engineering, we’ll take one of their vacant ports and connect to one of the vacant ports on the bottom switch that belongs to the Eng ineering VLAN. But can you see that it doesn’t scale well? If I had ten VLANs, we would be occupying ten switch ports just to interconnect the switches. What’s much more efficient is to have a single connection called a trunk. And the most popular type of Ethernet trunk out there is a standards - based trunk. It’s an IEEE 802.1Q trunk connection. And a trunk has the very unique ability to carry traffic from multiple VLANs. So if the Sales PC wants to talk to the Sales Server, it’s going to flow between the sw itches over that trunk and then go out to the Sales Server.