Page 1 of 3BInstall Instructions for CF Moto SeatsPage 2 of 31 Remove the stock seats from the vehicle using the release latch behind the seat3 Turn the PRP seat upside down on its head and place the ID: 876112
Download Pdf The PPT/PDF document "Install Instructions PRP SeatsCF Moto 13..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 Page 1 of 3 Install Instructions PRP Sea
Page 1 of 3 Install Instructions PRP SeatsCF Moto 13 - 20 ZForce- 2 Door Seats InstallationRead through all of the instructions completely before beginning the install.A. Hardware 4 ¼x20x1Remove all parts from the box and unwrap completely using the packaging to lay out the pieces.Tools Needed: (not included)#4 Allen wrenchDrill (Optional)Time: Approx 2 Hours.Parts B. Install Instructions for CF Moto SeatsPage 2 of 3 1. Remove the stock seats from the vehicle using the release latch behind the seat.3. Turn the PRP seat upside down on its head and place the plastic pan onto the PRP Seat.2
2 . Using a #4 Allen remove the four bolts
. Using a #4 Allen remove the four bolts holding the plastic pan to the stock seat.4. Using the 4 ¼x20x1 bolts and washers, bolt the plastic pan down to the PRP Seat. The PRP seat has several threaded mounting holes available. Choose witch ever ones line up and get your seat to the desired location. Keep the bolts loose until you test t the seat back into the vehicle. This way you can get it as far forward as back as you like. Install Instructions for CF Moto SeatsPage 3 of 3 5. In a red plastic bag taped to your seat bag we have included 4 small screws nuts and washers used to attach
3 the webbing at the bottom of the seat to
the webbing at the bottom of the seat to the release latch on your seat pan. Depending on the year of your Z Force you may need to drill the 2 small holes out on your latch so the included screws t through the holes. This webbing tether is used to release the seat from the vehicle.7. Place the PRP Seat into the vehicle.6. (Optional) Once the PRP seat is installed you will notice that is wider than your stock seat and hits the inside plastic panel. If you want the seat to slide back farther, you will have to trim this plastic piece. PRP does not have instructions on how or where to do thi