Step by Step - PDF document

1 Step by Step How ToPaint Your Floor USED
Step by Step How ToPaint Your Floor USED BY PROFESSIONALS SINCE 1919 Bona ProductsBona offers a wide range of products for all kinds of oors. Read our step-by-step guides for more information on how to take care of and renovate oiled oors, varnished oors, painted oors and outdoor decking.Bona Spray Mop is always ready-to-use. The spray/clean method ensures that cleaning solution is released in a controlled manner on the oor which reduces the potential for damaging the wood.Bona Floor WipesUse Bona Floor Wipes to wipe off spills on your wooden oor, quick and easy.About BonaBased on decades of professional experience, Bona - the leading expert within wooden oor renovation - has developed a special product range for today’s home renovators, meeting demands of simplicity, health and safety.Together with Bona it all goes 1-2-3 towards beautiful results. For more information please visit bona.com.Thanks to innovative self-crosslinking technology, this paint provides exceptional resistance to common household chemicals. 2inone LOW 2,5L= 50 m 1L= 40 m HO hr UV COAT hrs EN71-3 SAFETYTOY 31 x1 DIN 51130 R9 SustainabilityOn Track for Bona takes environment seriously. With an innovative and systematic approach we work to lower our impact on the environment and create sustainable solutions for the future. 2inone LOW 2,5L= 50 m 1L= 40 m HO hr UV COAT hrs EN71-3 SAFETYTOY 31 x1 DIN 51130 R9 SustainabilityOn Track for The EN 71-3 standard veries that the product is free from dangerous heavy metals such as lead, chromium, arsenic etc and approved for application on childrens toys. 2inone LOW 2,5L= 50 m 1L= 40 m HO hr UV COAT hrs EN71-3 SAFETYTOY 31 x1 DIN 51130 R9 SustainabilityOn Track for Today’s waterborne products offer top performance while reducing the amount of dangerous solvent fumes. Cleaning of tools and spills is made much easier and more convenient. 2inone LOW 2,5L= 50 m 1L= 40 m HO hr UV COAT hrs EN71-3 SAFETYTOY 31 x1 DIN 51130 R9 SustainabilityOn Track for Bona Wood Floor Paint is a premium paint with very high solids content for better covering properties and durability. 2inone LOW 2,5L= 50 m 1L= 40 m HO hr UV COAT hrs EN71-3 SAFETYTOY 31 x1 DIN 51130 R9 SustainabilityOn Track for Key Product FeaturesThese icons highlight some key product features that often make our products unique on the market and a sustainable choice for the future. BlackGrey Paint Your Wooden FloorsRenovating a wooden oor can seem complicated but then again be very rewarding. Follow our step-by-step instructions and discover the beauty that lies hidden in your old wooden oors.Material check list:Fine short-haired rollerExtension barSmall brushAbrasive paper grit 150Vacuum cleane

2 rDampened lint-free clothGloves, safety
rDampened lint-free clothGloves, safety goggles and disposable booties Untreated Wooden FloorsStir the container. Allow the bubbles 5-10 minutes to disappear before use. Note: The initial application onto the bare wood is made with Bona Wood Floor Primer.Apply the primer in sections, without interruptions. Plan your application, taking into account where you will start and exit the room.Previously varnished/painted surfacesPreviously varnished or painted surfaces can be treated directly with new paint. However, before such work is performed, a test must be done to verify that the adhesion is satisfactory. Clean the floor and lightly abrade on a few places on the floor. Apply paint to the abraded areas. After 24 hours, scratch the surface gently with a coin. If the paint remains firmly attached to the floor, adhesion is satisfactory and the work can be continued. If the paint peels, it is necessary to sand the floor down to bare wood before applying paint.1.Clean the oor thoroughly with Bona Wood Floor Cleaner. Repeat if necessary. 2.Rub down the surface with abrasive paper grit 120-150. Make sure no areas of the oor remain untouched by the sanding.3.4.When Can My Floor Be Used Again?The oor will usually take light foot trafc 8 hours after application. After 24 hours, furniture can be returned but wait with the heavy objects until after the rst few days. After one week the nish has reached full hardness and carpets can be replaced.1.the far end of the room. Use a brush or a small roller. Do not paint all edges in 2.Dip the roller into the bucket and section in the direction of the wood. Lift and set down the roller carefully.3.previous section for a smooth transition. covered. Let dry for 2-3 hours.4.5. Vacuum the oor and tack it with a dampened cloth.let dry. To repair or ll up gaps in the oor, mix wood dust from the sanding process with Bona Wood Filler Mix. An edge sanding machine produces the most suitable dust. For very large gaps use Bona Wood Mastic.For thorough intructions, read back of product or visit bona.com. Preparations Apply the Paint Keep Your Floor BeautifulDry clean the oor regularly with a vacuum cleaner, a soft broom or a Bona Dusting Pad. On occasion, mist the surface with Bona Wood Floor Cleaner and wipe clean.If the oor needs freshening up, apply a layer of Bona Wood Floor Polish, to bring back the lustre of the wood. Periodic Maintenance Careful sanding and preparation of the oor is key to creating the perfect surface. Make sure to sand down to bare wood.Once sanded, carefully vacuum the surface and anywhere else dust may have gathered. Apply the varnish in normal room temperature, 18-25°C. Pull down curtains to avoid direct sunlight on the floor. Step by Ste