Fresco2 Tap MENU3 Tap SETUP 4 Con31rm that the Firmware Version is FR10V1043 or later5 Tap CONTROLLER 6 Make sure that the Bluetooth box is checked7 Tap CLOSEiPad1 Check the model number on the back ID: 885967
Download Pdf The PPT/PDF document "1 Login if needed to gain Con31gure or A..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 Fresco: 1. Login if needed to gain Con
Fresco: 1. Login if needed to gain Con gure or Administrator access 2. Tap MENU 3. Tap SETUP 4. Con rm that the Firmware Version is FR10V104.3 or later 5. Tap CONTROLLER 6. Make sure that the Bluetooth box is checked 7. Tap CLOSE iPad: 1. Check the model number on the back of the iPad. It must be version A1400 or higher 2. Launch the Settings app 3. Tap General 4. Tap Bluetooth 5. Con rm that the Bluetooth switch is on 6. Launch the Fresco Mobile app 7. Tap the Controllers button in the lower right corner 8. Bluetooth connections are indicated by "(Bt)" after the controller name. If a controller is also reachable via Wi-Fi, and you are connected to its network, it will appear a second time on the list with "(Wi-Fi)" 9. Tap a controller name to connect 10. Enter your Fresco username and password (Default Username is “ acuity ” and default Password is “ 1234 ”) and tap Connect. If your Fresco account allows Con gure or Admin access, and you want to be able to save or edit scenes from the app, you can tap "Connect and Login" to gain full access immediately. Otherwise you may tap the Fresco MENU and LOGIN commands at any time later to allow saving and editing of scenes 11. An indicator in the upper left corner indicates connection status a. Red box-inactive b. Blue box-active Note: This pairing does not re ect the typical pairing where the Bluetooth icon on the iPad changes color when connected. REV 06015015 Fresco/iPad Bluetooth Pairing Instructions