/
Passive Optical LAN Passive Optical LAN

Passive Optical LAN - PowerPoint Presentation

jane-oiler
jane-oiler . @jane-oiler
Follow
342 views
Uploaded On 2019-11-21

Passive Optical LAN - PPT Presentation

Passive Optical LAN Agenda What is a Passive Optical LAN Benefits of a Passive Optical LAN Infrastructure Cost Savings Floor Layout Products CableSplitter Configurations Passive Optical LAN Enterprise version of PON ID: 766309

amp optical cabling fiber optical amp fiber cabling splitter passive zone enclosure cable pol occ lan mount 500 ceiling

Share:

Link:

Embed:

Download Presentation from below link

Download Presentation The PPT/PDF document "Passive Optical LAN" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

Passive Optical LAN

Agenda What is a Passive Optical LAN Benefits of a Passive Optical LAN Infrastructure Cost Savings Floor Layout Products Cable/Splitter Configurations

Passive Optical LAN Enterprise version of PON ( FiOS or uVerse in the Enterprise)Optical Splitter Replaces Aggregation/Access SwitchesConventional structured cabling is eliminatedAll cabling is Simplex Singlemode Fiber*

Each OLT supports over 8,000 Gbe PoE + Interfaces from a single managed IP 1310nm: GPON Upstream (1.24Gbps TDM) 1490nm: GPON Downstream (2.48Gbps TDMA) 1550nm: RF Video Downstream Core Network OLAN OLTs (Primary & Redundant) Passive Splitter Optical Network Terminals RF Video Fiber Amplifier Passive Optical LAN Schematic 2x32 Each Gbe Interface provides: 8 VLAN queues 256 MACs L2 – L4 ACLs PoE / PoE + 802.1x/NAC

Shared Infrastructure

Cost Savings CapEx Savings: 40% - 60% OpEx Savings: 50% - 75%Space Requirements: up to 90%Total elimination of the telecom closet.HVACPower BackupBetter use of the space

Cabling the Office

Cabling the Office

Cabling the Office

Cabling the Office

Above the Ceiling - Traditional

Above the Ceiling - POL

Cabling Slack Simple storage in the ceiling Coil cables in J-Hooks

Product Family for POLs Enclosures Zone Enclosures (deep and shallow profile) Wall Mount Rack Mount (RTC/RTS – Preconfigured)AccessoriesSplitter Cassettes Break out cassettes (supporting truck cable use) Cable AssembliesPre-terminated SM fiber SC (angle polished ) Trunk cables

The POL Family

Zone Enclosures Large box is 8”D & supports 3 splitters simultaneously Small box is 4’’D and supports a single splitter Both boxes are 2’ x 2’ (typical ceiling tile size) Novel pivoting mechanism for rotating the adapter plates into a more accessible positionTrim kit for alignment with ceiling tiles.Hung with wire rope (or ATR, etc.)

Zone Enclosure (ZED12AP) (96 Port Configuration)

Zone Enclosure (ZES6AP) (32 Port Configuration)

Zone Enclosure

Zone Enclosure

Zone Enclosure Brackets

Zone Enclosure Trim Kit Flush Extended

Wall Mount Enclosure Supports a single splitter C entral mounting mechanism is completely removable Locking latch

Preconfigured Rack Mount Chassis RTC/RTS Fiber Enclosure (1U, 2U, & 4U) 600 Series Adapter Plates Low profile ZE is same layout as 2U chassis Preconfigured to support various splitter orientations

Splitter & Breakout Cassettes Splitter is contained in a cassette form factor 1x32, 2x32 & 1x16, 2x16 most popular Fits into a standard 600 series adapter plate Breakout cassettes support trunk cable use (MTP-SCAPC shown)

Splitter Types Fused Biconic Tapered(FBT) OlderLimited Quality SplitsPlaner Lightwave Circuit(PLC)Larger Fiber CountsQuality Splits

Desktop Angled Single Port Faceplates Surface Mount Enclosures

Corrugated Plastic Spools Pre-terminated cable assemblies Standard lengths Corrugated plastic Easily collapsibleMoisture resilientRecyclable

OCC POL Cables Enhanced mechanicals Riser, Plenum, & LSZH Simplex, Duplex, Composite construction options Primary 2.9mm jackets2.0mm & 4.0mm jacketsDifferent colored jackets availableStandard - Yellow

OCC Fiber Types Singlemode Fiber SLA (default)Low Waterpeak ITU-T G.652.DBend Tolerant ITU-T G.657 A1SLXLow Waterpeak ITU-T G.652.D

OCC POL Cable Jacket N Riser S Plenum LSZH Operating Temp -40°C to 85°C 0°C to 70°C -20º to 70°C Installation Temp -10°C to 60ºC 0°C to 60ºC 0°C to 60 ºC Pulling Tension Installation 500 N (110 lbs ) 500 N (110 lbs ) 500 N (110 lbs) G567.A1 Yes Yes Yes G 652.D Yes Yes Yes 4-Pair Copper Cable Pulling Tension – 25 lbs.

Mechanical Performance N jacket (OFNR) S jacket ( OFNP) Industry Standard ICEA-S-596 Impact Resistance EIA/TIA-455-25A 1000 200 2 Crush Resistance (N/cm ) EIA/TIA-455-41A 750 500 35 Flex Resistance (# cycles ) EIA/TIA-455-104A 7,500 2,000 25 OCC POL Cable

Channel Configuration - Plug & Play

Individual Plug & Play or Standard Terminations

Trunk Cables

2X Splitters

Extended Product Warranty Singlemode fiber is probably the only medium that is capable of supporting our customers growing need for more bandwidth into the future. Singlemode fiber has the bandwidth to truly require an extended warranty. OCC has incorporated the optical lan products into our 25 year warranty.

POL Summary Passive Optical Lans offer a cost effective alternative to classic structured cabling OCC offers a complete cabling infrastructure for the Passive Optical LanWe can work with our customers to custom configure the solution39

Additional Information Website: http ://www.occfiber.com/pol Video: https://www.youtube.com/watch?feature=player_embedded&v=_09LUG2tMLs Brochure: http:// www.occfiber.com/main/download.php?d=247 40

Contact Information Stephen Porach, PE, RCDD Manager Business Development – Enterprise Solutions Stephen.Porach@OCCFiber.com