University Of Engineering amp Technology SZAB Campus Khairpur Mirs Subject Theory Of EMF Hysteresis Loop amp Some Magnetic Properties Topic Presenting Roll No K12 EL 28 Hysteresis ID: 389434
Download Presentation The PPT/PDF document "Mehran" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1Slide2
Mehran
University Of Engineering & Technology SZAB Campus Khairpur Mir’s
Subject:
Theory Of EMF
Hysteresis Loop & Some Magnetic Properties(Topic)
Presenting Roll No:
K-12 EL 28Slide3
Hysteresis
Hysteresis LoopSome Magnetic propertiesOutline:Slide4
Hysteresis
When an external magnetic field is applied to a ferromagnetic such as iron, the atomic dipoles align themselves with it. Even when the field is removed, part of the alignment will be retained: the material has become magnetized.This lagging behind of flux density(B) or magnetization to magnetizing force(H) is called Hysteresis or Hysteresis Loss.Some
compositions of ferromagnetic materials will retain an imposed magnetization indefinitely and are useful as "permanent magnets".Slide5
A hysteresis loop shows the relationship between the induced magnetic flux density (B) and the magnetizing force (H
).It is often referred to as the B-H loop or curveThe loop is generated by measuring the magnetic flux of a ferromagnetic material while the magnetizing force is changed.This property of ferromagnetic materials is useful as a magnetic "memory". Hysteresis LoopSlide6
B & H
Magnetic flux density (B): The amount of magnetic flux through a unit area taken perpendicular to the direction of the magnetic flux.It is expressed by the force per unit length on a conductor carrying unit current at a point near it.Magnetizing Force (H):
It is the force which depends upon the current which is passed through a magnetic material to magnetize it.Slide7Slide8
Comparing two Hysteresis loopsSlide9
Another
example of hysteresis loop is shown below:Hysteresis LoopSlide10
Magnetic Properties
Retentivity :It is a material's ability to retain a certain amount of residual magnetic field when the magnetizing force is removed after achieving saturation. Residual Magnetism or Residual Flux : the magnetic flux density that remains in a material when the magnetizing force is zero.
Coercive Force
: The amount of reverse magnetic field which must be applied to a magnetic material to make the magnetic flux return to zero.Slide11
Magnetic Properties
Permeability (m): It is a material property that describes the ease with which a magnetic flux is established in a component. It is the ratio of the flux density (B) created within a material to the magnetizing field (H) and is represented by the following equation: m = B/HReluctance : It is the opposition that a ferromagnetic material shows to the establishment of a magnetic field. Reluctance is analogous to the resistance in an electrical circuit
.Slide12
References:
Internet Links:http://en.wikipedia.org/wiki/Hysteresis#Magnetic_hysteresishttp://magician.ucsd.edu/essentials/webbookse26.htmlhttp://wiki.answers.com/Q/What_is_hysteresis_losshttp://hyperphysics.phy-astr.gsu.edu/hbase/solids/hyst.htmlhttp://www.ndt-ed.org/EducationResources/CommunityCollege/MagParticle/Physics/HysteresisLoop.htmSlide13