SPECIFICATIONS - PDF document

| 1 | ARCHITECTURAL AREA LIGHTING17760 Rowland Street | City of Industry | CA 91748P 626.968.5666 | F 626.369.2695Copyright © 201 TYPENOTES MAXIMUM ALLOWABLE EPA (MPH)SERIES 1. SHAFT OAHSHAFTWT8590100110120130140150PR44R8-1258’ (2.4m)4” RD x .125” 2212.310.98.75.74.84.13.6PR44R10-12510’ (3.1m)4” RD x .125” 259.16.34.94.03.32.82.4PR44R12-12512’ (3.7m)4” RD x .125” 286.94.53.42.62.11.81.5PR44R14-12514’ (4.3m)4” RD x .125” 325.24.43.22.31.51.20.8PR44R16-12516’ (4.9m)4” RD x .125” 353.93.22.1 | 1 | 16555 East Gale Ave.City of Industry | CA 91745www.aal.net PR4 – Aluminum PoleTYPE4" ROUND (RD) POLE SPECIFICATIONS Base shall be cast aluminum #356 alloy, free of any porosity, foreign materials, or cosmetic fillers. Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, with no warping or mold shifting.WARNINGSCaution must be exercised in the selection of a design wind speed when the pole is to be installed in a special wind region (as indicated by the wind map) or in an area where wind speed is unpredictable.AAL recommends consulting a local engineer when the pole is to be installed in an area that may be subject to extreme weather and exposurePoles installed on structures such as buildings and bridges may be subjected to vibration, oscillations, and other fatigue effects which are not covered by the AAL warranty.The use of banners or other appendages can severely affect the loading of a pole. No banner or other appendage should be attached to an AAL pole unless approved by AAL.If the products are to be used on an existing foundation or on other structures, the customer assumes all responsibility for the structural integrity of the existing foundation, anchorage or structures and all the consequences arising therefrom.CAUTION MAXIMUM ALLOWABLE EPA (MPH)1. BASE2. POLE3. OAHSHAFT100110120130140150PR44R8-1258’ (2.4m)4” RD x .125” 12.310.98.75.74.84.13.6PR44R10-12510’ (3.1m)4” RD x .125” 9.16.34.94.03.32.82.4PR44R12-12512’ (3.7m)4” RD x .125” 6.94.53.42.62.11.81.5PR44R14-12514’ (4.3m)4” RD x .125” RALCUSTOM * * Contact Factory Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, with no warping or mold shifting.WARNINGSCaution must be exercised in the selection of a design wind speed when the pole is to be installed in a special wind region (as indicated by the wind map) or in an area where wind speed is unpredictable.AAL recommends consulting a local engineer when the pole is to be installed in an area that may be subject to extreme weather and exposure.Poles installed on structures such as buildings and bridges may be subjected to vibration, oscillations, and other fatigue effects which are not covered by the AAL warranty.The use of banners or other appendages can severely affect the loading of a pole. No banner or other appendage should be attached to an AAL pole unless approved by AAL.If the products are to be used on an existing ShaftOptionsControlReceptacleBaseFinishMounting 2. OPTIONSMay choose oneLR Ladder Rest3. CONTROLSmay choose onePCR Photocontrol ReceptaclePHC-120V Button Type Photocell, 120VPHC-208V Button Type Photocell, 208VPHC-240V Button Type Photocell, 240VPHC-277V Button Type Photocell, 277VSCP Sensor Control Programmable 120-277VSCP-347V Sensor Control Programmable 347VSCP-480V Sensor Control Programmable 480V4. RECEPTACLE PR4 – Aluminum Pole TYPE 4" ROUND (RD) POLE PR4 6. COLORBLTConsult factory for custom color, marine and 6. COLORBLTBlack Matte TexturedDark Bronze Matte TexturedGraphite Matte TexturedLight Grey Matte TexturedVGTVerde Green TexturedWhite Matte TexturedConsult factory for custom color, marine | 2 | ARCHITECTURAL AREA LIGHTING17760 Rowland Street | City of Industry | CA 91748P 626.968.5666 | F 626.369.2695Copyright © 201 DIMENSIONS