www.daytonprogress.com - PDF document

1 www.daytonlamina.com SMARTStripTM Strippers & Forming Sheets, Rods, Bars, Tubes, Springs a MISUMI Group Company 2 © 2002 Dayton Progress CorporationAll Rights ReservedClosed End Punch StrippersClosed End Urethane Strippers assure positive stripping and at the same time dampen punch vibration by gripping around the punch point. Since vibration can lead to premature punch failure, using DAYTON PROGRESS Urethane Strippers will increase overall punch life. The closed end feature holds thin stock at during the stripping cycle.Because of a unique curing agent, DAYTON's Urethane Strippers develop more load-bearing capacity than similar urethanes. This special curing agent also contributes to consistent pressure ratings. DAYTON closed end 3 Hard Face / Dual DurometerA New DAYTON PROGRESS ExclusiveStamping shapes in thin material? Stamping pre-painted material? Short runs?Piercing on angles or complex contours?...Any application where using a metal spring stripper is problematic or just not cost effective. The answer is the new SMARTStrip stripper, available only from DAYTON PROGRESS.The body of the closed-end punch stripper is made of exible, softer urethane elastomer 95A, enabling deections up to 15%.The 75D durometer hard face performs like steel but is elastic, durable and does not mark the surface of the sheet metal or prepainted material.The SMARTStrip stripper can be machined to match the contour of the material being punched.Unlike strippers that have a piece of plastic or metal glued to the end, the hard face on the SMARTStrip can not separate from the body. 4 Headed Strippers O.D. O.D.USS-18-125USS-18-150USS-25-125USS-25-150USS-25-175USS-31-125USS-31-150USS-31-175USS-31-200USS-37-125USS-37-150USS-37-175USS-37-200USS-50-125USS-50-150USS-50-175USS-50-200USS-50-225USS-62-125USS-62-150USS-62-175USS-62-200USS-75-175USS-75-200USS-75-225USS-75-250USS-75-275USS-87-175USS-87-200USS-87-225USS-87-250USS-87-275 USS-100-175USS-100-200USS-100-225USS-100-250USS-100-275 Designed to comply with (North American Automotive Metric Standard) & FORD World Standard.The headed design prevents the strippers from falling into die.Fits most makes of standard retainers for head type and ball lock type punches. Standard durometer: 95APressure ratings shown in newtons for metric products.UHM, UHS, UBP, and URP conform to Ideal for punching odd shaped holes.Assure positive stripping.Increases punch life, as punch stripper supports the punch tip, by dampening the vibration of the punch, as it pierces the sheet metal.length. Pressure ratings shown in pounds. Retaining Plate How to Order:Qty.Catalog No. UBP, URB RetainingSet consists of: Backing Plate, Retaining Plate and M8 x 20 Socket Head Cap Screw. O.D. O.D. 1213/4USE-100-1751840282537755/162USE-100-2001430230529659/3221/4USE-100-2251115193025259/3221/2USE-100-2501055184024601/423/4USE-100-2751030174023307/32t=1/4” O.D.Pressure ratings shown in newtons. Sheets layered in a retainer offer multiple working surfaces and more Urethane bars are specially-molded die-pads for press brake bending applications. Rods are used as strippers, pressure cylinders, in bulging applications, as tube bending mandrels, & for machining.Used as pressure pads, they exert enormous amounts of pressures. When used as pressure pads, they can replace rows of springs or banks of nitrogen cylinders. How to Order:Qty.TypeUCS Sheets, Rods & Bars Pressure Ratings for BarsLengthDT-35 (80A)DT-25 (90A)DT-15 (95A) UCS Cast Sheet Stock Lengths RedYellow Pressure Ratings for DT-25(90A) Solid RodsLoad for Deflection by: URD RodsLengths 7 The I.D. of the tube spring (P) is slightly smaller than the nominal punch body diameter, so as to enable the spring to be pressed on the punch body.Advantages of urethane springs, open end strippers and tubes:• High• Closer• High• Oil• Punch• Easy• Noinjury to worker and damage to the die.• Conventionalcompared to 2600 lbs. per How to Order:Qty.Catalog No.UPL-18-100Springs/Tubes Lbs. Req. to DeflectO.D.Length 21/282514852225UPH-88-27523/476013652055UPH-88-300369512451275UPH-88-2400241/2------UPH-100-125121/211/4233542006310UPH-100-15011/2192034555195UPH-100-17513/4161529104370UPH-100-2002137024803720UPH-100-22521/4118521303195UPH-100-25021/2109019602940UPH-100-27523/499518002700UPH-100-300389516102425UPH-100-400466011851785UPH-100-2400241/2------ Lbs. Req. to DeflectO.D.Length UPM-88-25021/258511051575UPM-88-27523/45109701380UPM-88-30033907401055UPM-88-2400241/2------UPM-100-1251211/4139526503765UPM-100-15011/2108020502915UPM-100-17513/487516552350UPM-100-200277014602075UPM-100-22521/469513151870UPM-100-25021/263011951700UPM-100-27523/457010851540UPM-100-30035109701380UPM-100-40043807201027UPM-100-2400241/2------ Lbs. Req. to DeflectO.D.LengthUPL-18-100UPL-18-125UPL-18-150UPL-18-1200UPL-25-100UPL-25-125UPL-25-150UPL-25-175UPL-25-1200UPL-31-100UPL-31-125UPL-31-150UPL-31-175UPL-31-200UPL-31-1200UPL-38-100UPL-38-125UPL-38-150UPL-38-175UPL-38-200UPL-38-2400UPL-50-100UPL-50-125UPL-50-150UPL-50-175UPL-50-200UPL-50-2400UPL-62-100UPL-62-125UPL-62-150UPL-62-175UPL-62-200UPL-62-2400UPL-75-125UPL-75-150UPL-75-175UPL-75-200UPL-75-225UPL-75-2400UPL-88-125UPL-88-150UPL-88-175UPL-88-200UPL-88-225UPL-88-250UPL-88-275UPL-88-2400 UPL-100-125UPL-100-150UPL-100-175UPL-100-200UPL-100-225UPL-100-250UPL-100-275UPL-100-2400 © 2018 Dayton Lamina Corporation. All rights reserved. Commitment to Quality & Customer SatisfactionDayton Lamina is a leading manufacturer of tool, die and mold components for the metal-working and plastics industries. As Our goal is to give our customers the most innovative and value-added products and services.www.daytonlamina.com **Dayton Lamina’s line of Danly products is available only to North America. Form 8044 8/02