/
browser does not support Bonjour you can also use 192.168.1.3 for Thin browser does not support Bonjour you can also use 192.168.1.3 for Thin

browser does not support Bonjour you can also use 192.168.1.3 for Thin - PDF document

luanne-stotts
luanne-stotts . @luanne-stotts
Follow
422 views
Uploaded On 2016-09-26

browser does not support Bonjour you can also use 192.168.1.3 for Thin - PPT Presentation

To install mDNS on linux ID: 470416

install mDNS linux:

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "browser does not support Bonjour you can..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

browser does not support Bonjour you can also use 192.168.1.3 for Thinking Cleaner acces while in wiÞ direct mode.!This mode is meant only for conÞguring the WiÞ network settings.!When the setup has been done the Thinking Cleaner can be found in several ways.1.Use a http call : To install mDNS on linux: - ÒmodelnrÓ: 600 : Roomba model, can be set in web-interface. Adds changed behavior for R800 series. {"ssid":"bits", "bssid":"", "privacy":"9", "wlan":"1", "channel":"11", "battery_charge" : 100, "capacity" : "2696", "cleaner_state" : "st_base_full", "cleaning" : "0", "schedule_serial_number" : Ò12Ó, "near_homebase" : "0" } } ÑExplanationÑÑÑÑÑÑÑ -name shows the name you entered during setup-battery_charge gives back 0 to 100 in percent.!Value is calculated by Roomba and can be wrong when the battery has been removed recently or when the Roomba was reset. When Roomba is in sleep (CLEAN button off) the percentage is calculated by Thinking Cleaner. -capacity is the battery capacity calculated bij Roomba in mA.!-cleaner_state gives back left column. Right is the text message associated: st_base On homebase: Not Chargingst_base_recon On homebase: Reconditioning Chargingst_base_full On homebase: Full Chargingst_base_trickle On homebase: Trickle Chargingst_base_wait On homebase: Waitingst_plug Plugged in: Not Chargingst_plug_recon Plugged in: Reconditioning Chargingst_plug_full Plugged in: Full Chargingst_plug_trickle Plugged in: Trickle Chargingst_plug_wait Plugged in: Waitingst_stopped Stoppedst_clean Cleaningst_cleanstop Stopped with cleaningst_clean_spot Spot cleaningst_clean_max Max cleaningst_delayed Delayed cleaning will start soon ..st_dock Searching Homebasest_pickup Roomba picked upst_remote Remote control drivingst_wait Waiting for commandst_off Offst_error Errorst_locate Find me!st_unknown Unknown state "name" : "kompas", "modelnr" : "500", "cleaning_time" : "0", "cleaning_time_total" : "260", "cleaning_distance" : "4680", "dirt_detected" : 7, "mainbrush_current" : 0, "0":[], "1":[ {"index":"0","time":"28800","command":"0"},{"index":"1","time":"75600","command":"0"} ], "2":[], "3":[], "4":[], "5":[], "6":[] }}Two schedules on Tuesday, one at 08:00 and one at 21:00.#