Mixing Procedures Figure 1 Mixer and mixing bucket recommendations Batch SizeBucket DimensionsMixing BladeSizeTypeMixing MotorTotal Mix VolumehheightddiameterVolume h1025 gal23 2050 lb18 t ID: 261177
Download Pdf The PPT/PDF document "standards and procedures. To obtain the ..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
standards and procedures. To obtain the fullCasting Media-To-Water RatioCasting Media to 18-20 lb. of water. It is vitallyCasting Mediapowder. Variations inWater PurityWater used in mixing D Mixing Procedures Figure 1. Mixer and mixing bucket recommendations Batch SizeBucket DimensionsMixing Blade-Size/TypeMixing MotorTotal Mix Volumeh=heightd=diameterVolume h=102.5 gal.2-3 20-50 lb.1.8 toh=135.4 gal.4 4.5 gal.h=1711.8 gal.4 50-100 lb.4.5-9 gal.h=2214.7 gal.41.Mixing vessel should be appropriately sized to contain DCasting Media slurry volume, assuming that density of slurry is approximately 130 lb./ft.2.Mixing vessel dimensions should maximize height and minimize diameter such that the height:diameter ratio is 1.2:1.6.3.Either a J4.Mixing motor should provide 1000-2000 RPM under load.5.Prop Mixer should be a three blade, 25¡-pitch propeller of appropriate diameter. HEALTH AND SAFETY INFORMATIONWARNING:When mixed with water, this material hardensthat may require surgical removal of affected tissue. Avoidor upper respiratory system. Wear eye and respiratoryWe shall not be liable for incidental orTrademarks:Gypsum Company. JTechnical Assistance: (800) 487-4431