/
FIVECHANNEL REMOTE THERMOHYGROMETER For Professional Weather Station TEWM USER MANUAL FIVECHANNEL REMOTE THERMOHYGROMETER For Professional Weather Station TEWM USER MANUAL

FIVECHANNEL REMOTE THERMOHYGROMETER For Professional Weather Station TEWM USER MANUAL - PDF document

min-jolicoeur
min-jolicoeur . @min-jolicoeur
Follow
564 views
Uploaded On 2014-12-21

FIVECHANNEL REMOTE THERMOHYGROMETER For Professional Weather Station TEWM USER MANUAL - PPT Presentation

Meade Instruments now brings that same passion innovation and high performance to its own line of precision feature rich weather stations In this package you will find One FiveChannel Remote Thermohygrometer transmitter TS34CM One User Manual Stan ID: 27674

Meade Instruments now brings

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "FIVECHANNEL REMOTE THERMOHYGROMETER For ..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

TABLE OF CONTENTSINTRODUCTION 3STANDARD PACKAGE CONTENTS 3INSTALLATION 3BEFORE YOU BEGIN 4FEATURES 5TROUBLESHOOTING 7PRECAUTIONS 7SPECIFICATIONS 8FCC STATEMENT 8DECLARATION OF CONFORMITY 9BATTERY SAFETY INSTRUCTIONS 10 Features¥ LCD display of measured temperature and humidity ¥ Five (5) transmission channels selection¥ Case can be wall mounted using built-in hangerA. LED INDICATOR ¥ Flashes once when the remote sensor transmits a reading to the main unit. ¥ Flashes twice when battery power is low.B. BATTERY COMPARTMENTHolds two AA-size batteriesC. RESETD. CHANNEL SWITCH E. WALL-MOUNT RECESSED OPENINGNote: Install the batteries and select the channel before mounting the sensor. WIRELESS THERMO HYGRO DEB TroubleshootingQ: "The remote sensor display shows dashes "---""Q: "Main unit display in temperature and humidity portion A: The display will show "- - -" when the wireless connection Check or replace the batteries in remote sensor. Then press and locations if necessary.¥ The remote thermo-hygrometer and a main unit are too far from each other.¥ The signal shielding materials, such as metal surfaces, concrete walls or dense vegetation, are in the path of transmission.¥ There is interference from the wireless devices (such as cordless phones, radio headsets and baby listening devices) and electronic appliances.Precautionsservice if handled carefully. Here are a few precautions:¥ Do not immerse the units in water.¥ Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.¥ Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.¥ Do not tamper with the product's internal components. Doing so will invalidate the warranty and may cause damage. The product contains no user-serviceable parts.¥ Use only fresh batteries. Do not mix new and old batteries.¥ Read the user's manual thoroughly before operating the product. determined by turning the equipment off and on, the user is ¥ Reorient or relocate the receiving antenna¥ Increase the separation between the equipment and receiver.¥ Connect the equipment to an outlet on a circuit different ¥ Consult the dealer or an experienced radio / TV technician DECLARATION OF CONFORMITYTelephone No.: 1-949-451-1450Product No.: TS34C-MProduct Name: Five-channel Remote Thermo-HygrometerKwai Chung, New Territories, Hong KongThe information above is not to be used as a contact for support or sales. Please call our customer service hotline (refer to the Standard Warranty Information) for all STANDARD WARRANTY INFORMATIONThis product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in to the original purchaser only and is non-transferable. Meade products purchased outside North America are not included in this warranty.RGA Number Required: Prior to the return of any product or part, a Return Goods Authorization (RGA) number must Department or by calling 800-626-3233. Each returned part or product must include a written statement detailing the nature of the claimed defect, as well as the owner's name, address, phone number, and a copy of the original sales abused or mishandled, where unauthorized repairs have been attempted or performed, or where depreciation of the product is due to normal wear-and-tear. MIC specifically disclaims special, indirect, or consequential damages or lost profits, which may result from a breach of this warranty. Any implied warranties which cannot be disclaimed are hereby limited to a term of one year from the date of purchase by the original retail purchaser. This warranty gives you specific rights. You may have other rights which vary from state to state.MIC reserves the right to change product specifications or to discontinue products without prior notice.This warranty supersedes all previous Meade product warranties.