/
Discussion of Potential to Emit Permit type is largely Discussion of Potential to Emit Permit type is largely

Discussion of Potential to Emit Permit type is largely - PDF document

natalia-silvester
natalia-silvester . @natalia-silvester
Follow
402 views
Uploaded On 2015-06-08

Discussion of Potential to Emit Permit type is largely - PPT Presentation

Potential emissions are different from actual emissions Generally potential emissions are the maximum emissions that would result from operating the facility at full capacity 24 hours a day 365 days a year taking into consideration federally enforce ID: 82695

Potential emissions are different

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "Discussion of Potential to Emit Permit t..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

�� General Guidance for Air Construction Permits��Page of te: /201, Revision: Discussion of Potential to Emit Permit type is largely dependent on the potential emissions (or the potential to emit (PTE)) of the https://www.epa.gov/airemissions factorsandquantification/apcompilationairemissionfactors . The PTE calculation takes into account reductions achieved by the use of control devicesand �� General Guidance for Air Construction Permits��Page of te: /201, Revision: Example PTE Calculation Determining the PTE for nitrogen oxide (NO) emissionsfrom a 50 million Btu per hour (MMBtu/hr) natural gasfired boiler. Maximum hourly design rate (MHDR) = 50 MMBtu/hremission factor from AP42 = 100 pounds (lbs) of NOemitted per million cubic feet (MMft) of natural gas burned Heating value of natural gas = 1,050 Btu/ftof natural gasConvert MHDR units = (50 MMbtu/hr)/(1,050 Btu/ftof natural gas) = 47,619 ftof natural gas/hr Annual operating hours = (365 days/year)*(24 hours/day) = 8,760 hours/year (Note:Annual operating hours is always 8760 hours per year;it does not represent the actual or expected hours of operation.)Annual natural gas usage = (8760 hr/yr) * (47,619 ftof natural gas/hr) = 417.14 of natural gas/year Annual NOPTE = (417.14 MMftnatural gas/yr) * (100 lbs NO/yr) = (41,714 lbs of /yr)/(2,000 lbs/ton) = 20.86 tons NO/year