/
Inches  Inches  cm  cm Guide provided by GoSoftWorks Inches  Inches  cm  cm Guide provided by GoSoftWorks

Inches Inches cm cm Guide provided by GoSoftWorks - PDF document

olivia-moreira
olivia-moreira . @olivia-moreira
Follow
477 views
Uploaded On 2014-12-28

Inches Inches cm cm Guide provided by GoSoftWorks - PPT Presentation

Makers of the astronomy GoSkyWatch Planetarium app Go outside and explore the night sky wwwgosoftworkscom Equipment Ruler Tape Good quality scissors test on old credit card Nail 57375le or sand paper 220 grit or higher Permanent felt tip marker ID: 30565

Makers the astronomy

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "Inches Inches cm cm Guide provided by..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

6 Inches 6 Inches 15 cm 15 cm Guide provided by GoSoftWorks. Makers of the astronomyGoSkyWatch Planetarium app.Go outside and explore the night sky.www.gosoftworks.comEquipment:- Tape- Good quality scissors (test on old credit card)- Nail le or sand paper (220 grit or higher)- Permanent felt tip marker penInstructions:1. Measure side rulers on guide to ensure guide has been printed to the correct scale.2. Tape SIM to matching center outline with gold contacts up. Place tape on edges so as to not cover Nano SIM area.3. Align ruler to cut line so that the ruler covers the gold contacts and mark with permanent marker felt pen. Repeat for the 5 cut lines.4. Remove SIM from this sheet and trim with scissors so that a portion of the marker lines are still visible. Use nail le or sand paper to trim so that no marker lines can be seen. Trim further and round corners with nail le or sandpaper until it ts in the iPhone 5 SIM tray.5. Sand or le plastic logo side of SIM so that it sits ush with the edge of SIM tray (0.67 mm). Hold SIM and rub against le or sand paper. DO NOT sand gold contact side.6. Finish by lightly sanding all edges.GoSoftWorks takes no responsibility to damage caused to the SIM or phone. It’s your own risk.Mini/MicroSIM to NanoSIM cutting guide 12.3 mm8.8 mm thickness