Document Number 68013For technical questions contact te1resistorsvishaycom THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFI ID: 192320
Download Pdf The PPT/PDF document "www.vishay.comVishay Techno" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
www.vishay.comVishay Techno Document Number: 68013For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistors, Alternate Terminations FEATURES Suitable for solderable, epoxy bondable, or wire bondable applications Termination material: gold, platinum silver, platinum palladium gold or solder coated nations available Multiple styles, termination materials and configurations, allow wide design flexibility Epoxy bondable or wire bondable nations available Flow solderable Custom sizes available Burn-in data available Automatic placement capability Termination style: 3-sided wraparound termination or single termination flip chip standard; 5-sided wraparound termination available Tape and reel packaging available Internationally standardized sizes Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Noteï *This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, partswith lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. Notes Continuous working voltage shall be or maximum working voltage, whichever is less. (2) Higher values available. Please consult factory. (3) , ± 200 ppm/°C offered from 1.1 M MIL case size 0705 and EIA case size 0805 are dimensio NoteFor additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543 Available Available STANDARD ELECTRICAL SPECIFICATIONSMODELCASE SIZEPOWER RATING70 °CMAXIMUM WORKING VOLTAGE (1)RESISTANCERANGE (2)TOLERANCETEMPERATURECOEFFICIENT (3)(-55 °C to +155 °C)± ppm/°CRC054005040.1004010 to 500K1, 2, 5, 10, 20100 RC055005050.1005010 to 500K1, 2, 5, 10, 20 100 RC05750705 (4)0.2007010 to 1M1, 2, 5, 10, 20 100 RC510010050.25010010 to 1M1, 2, 5, 10, 20 100 RC110010100.45010010 to 1M1, 2, 5, 10, 20 100 RC120612060.30010010 to 1M1, 2, 5, 10, 20100 RC515015050.32512510 to 1M1, 2, 5, 10, 20 100 RC722522080.52520010 to 1M1, 2, 5, 10, 20 100 RC201020100.57520010 to 1M1, 2, 5, 10, 20 100 GLOBAL PART NUMBER INFORMATIONNew Global Part Numbering: RC0540AA1K00FKSB (preferred pa GLOBAL SIZE TERM STYLE TERM MATERIAL RESISTANCE VALUE TOLERANCE TCR SOLDER TERMINATION PACKAGING = 3-sided = Top only = Palladium silver = Platinum silver M = M1K00 = 1 M F = ± 1 %G = ± 2 %J = ± 5 %K = ± 10 %M = ± 20 % = 150 ppm = Sn100= Sn95/Ag5, Sn62/Pb36/Ag2,HSD = Sn90/Pb10 = No sol = Bulk(full reel)(250 pcs min.) = Waffle Historical Part Numbering: CR1AA1001F100S2 (will continue to be accepted)CR1AA1001F100S2 HISTORICAL MODEL SIZE TERMSTYLE TERM RESISTANCE VALUE TOLERANCE SOLDER TERMINATION x 540A1K0 0FKB S www.vishay.comVishay Techno Document Number: 68013For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) All dimensions are before solder coating. Notes Standard solder plating for the non-magnetic parts are solder terminations E or T. Hot solder dipped terminations F or S are also available.Use solder termination N for applications requiring epoxy bondable mounting, and solder terminations F or S for applications requiring solderable mounting.While not recommended, palladium silver terminations could be used for solderable applications when using a solder alloy containing silver. If the solder paste being used to solder the palladium silver terminated parts to the boards does not have a silver-based compothe silver in the terminations could begin to leach when it is exposed to liquidus non-silver-based solders, causing the potential for solderability and/or solder joint issues. MECHANICAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Substrate 96 % alumina Termination Gold, palladium silver, platinum gold, platinum silver, platinum palladium gold or solder coated non-magnetic terminations available. Solder finish Base metallization without a solder finish standard. Hot solder tin/lead/silver solder alloys available. ENVIRONMENTAL SPECIFICATIONSOperating temperature-55 °C to +155 °CMoisture resistanceLess than 0.5 % change when testedper method 106 of MIL-STD-202Less than 1 % change when testedper method 108D (+85 °C)Short time overloadLess than 0.5 % DIMENSIONS in inches (millimeters)LENGTH (L) (1) ± 0.006 (0.152)WIDTH (W) (1)± 0.006 (0.152)THICKNESS (T) (1)± 0.005 (0.127)RC0540 0.050 (1.27) 0.040 (1.02) 0.020 (0.508) RC0550 0.050 (1.27) 0.050 (1.27) 0.020 (0.508) RC0575 0.075 (1.90) 0.050 (1.27) 0.020 (0.508) RC5100 0.100 (2.54) 0.050 (1.27) 0.020 (0.508) RC1100 0.100 (2.54) 0.100 (2.54) 0.020 (0.508) RC1206 0.125 (3.18) 0.062 (1.57) 0.025 (0.635) RC5150 0.150 (3.81) 0.050 (1.27) 0.020 (0.508) RC7225 0.225 (5.72) 0.075 (1.90) 0.020 (0.508) RC20100.200 (5.08) 0.100 (2.54) 0.025 (0.635) TERMINATION TERMINATIONSTYLETERMINATION STYLE/MATERIAL CODESOLDER TERMINATION CODESolderableNon-magnetic3-sided (wraparound)AGE or T (standard);F or S (optional) (2)Top only (flip chip)BGEpoxy bondable/solderablePlatinum palladium gold3-sided (wraparound)AEF or S (optional) (3)Top only (flip chip)BE5-sided (wraparound)CEWire bondable/Epoxy bondable3-sided (wraparound)ACTop only (flip chip)BC5-sided (wraparound)CCEpoxy bondablePalladium silver (4)3-sided (wraparound)AATop only (flip chip)BA5-sided (wraparound)CA3-sided (wraparound)ABTop only (flip chip)BB5-sided (wraparound)CBPlatinum silver3-sided (wraparound)ADTop only (flip chip)BD5-sided (wraparound)CD Termination Style A ï (3-sided wraparound) 0.025 [0.635]TW Termination Style B(Top conductor only) 0.025 [0.635]TL Termination Style C(5-sided wraparound) TWL0.025 [0.635] www.vishay.com Document Number: 91000 Disclaimer