These pins also provide coding if pneumatic contactsmodules are used e - PDF document

312These pins also provide coding if pn
312These pins also provide coding if pneumatic contactsmodules are used exclusively.The use of pneumatic contacts requires an appropriatefiltering and dehydration system to prevent dangerousContacts may be used for pressure values of up to a12312modular units with 3 seatsmodular units with 2 seatsThe modular inserts must be installed in suitable frames which are then mounted in traditional enclosures or in COB panel Single-sized modular units may be directly mounted inside MIXO ONE enclosures.frames for modular unitsMIXO ONE enclosuresdescriptionpart No.part No. - insulation resistance: ≥ 10 GΩmade of self-extinguishing thermoplastic resin- mechanical life: ≥ 500 cyclesUse of units for pneumatic contactspneumatic contacts for pressure values up to 8 bar,for use with clean and dry compressed airuse of tubes with Ø 1,6 - 3 - 4 and 6 mm, andpossible replacement of tubes with assembled unitspossibility of using tubes with different diameters in theworking temperature range - 40 °C ÷ + 80 °Cwithout contacts (to be ordered separately)inserts with 3 housings for tube Ø 1,6 - 4,0without contacts (to be ordered separat

ely)inserts with 2 housings for tube Ø
ely)inserts with 2 housings for tube Ø 6,0 12312M/F- 1 frame slotcontacts side (front view)side with reference arrow 123123414,727,5M/F12312M/F- 1 frame slotcontacts side (front view)side with reference arrow MIXO INSERTSdimensions shown in mm are not binding andmay扥ichanged without notice313CX 1.6 PF/PM/VCCX 3.0 PF/PM/VC6,258,256,258,4with or without closing valve9,511,56,258,4female contacts without closing valve- for tubes with internal ø 1,6 mm - for tubes with internal ø 3 mm - for tubes with internal ø 4 mm - for tubes with internal ø 6 mm male contacts without closing valve- for tubes with internal ø 1,6 mm - for tubes with internal ø 3 mm - for tubes with internal ø 4 mm - for tubes with internal ø 6 mm female contacts with closing valve - for tubes with internal ø 1,6 mm - for tubes with internal ø 3 mm - for tubes with internal ø 4 mm - for tubes with internal ø 6 mm (use contacts without closing valve)descriptionpart No. dimensions shown in mm are not binding andmay扥ichanged without noticeSUM UPDie-cast zinc alloy framesPro

tective earth (PE)Possibility of mountin
tective earth (PE)Possibility of mounting female and male modular units on the same framePolarisation on framesWhen two or more identical connectors of the MIXO series are used, use of coding pins (CR...CX series) may prevent incorrect coupling314MIXO INSERTSMIXO modular unitsFramesTECHNICAL FEATURESMIXO FRAMES315MIXO INSERTSCalculatesize: 1 frame slot No. of frame slots No. of frame slotssize: 3 frame slotssize: 2 frame slots No. of frame slotsHOW TO SELECT FRAMESSelect (available 1, 2, 3, 4 and 6 modules).CX 01 TCX 02 TF/TMCX 03 TF/TM1 module2 modules3 modules13CX 04 TF/TMCX 06 TF/TM4 modules6 modules123456Possibility to use the MIXO HNM framesand the relevant connector hoods and housings, to produce where cycles of operation).frames for modular unitsfor CZ enclosures - die-cast zinc alloy frames- polarisation on framesdistance for pneumatic contacts: max 23,5 mmAWG 18-14 CZ7 IP67, single leverW-TYPE for aggressive environments corrosion proofpanel supports:316MIXO INSERTSMIXO modular unitsCX 01 Tdimensions shown in mm are not binding andmay扥ichanged without noticeframes for modular u

nitswith lock-in tab (included)- die-ca
nitswith lock-in tab (included)- die-cast zinc alloy framespossibility of mounting female and male modular units on - frames supplied with lock-in tab to attach units- polarisation on framesfor spare lock-in tab see SPARE SPARTSV-TYPE IP65/IP66BIG hoodsT-TYPE IP65 insulatingT-TYPE / W IP66/IP69 insulatingHYGIENIC T-TYPE / H IP66/IP69HYGIENIC T-TYPE / C IP66/IP69, -50 °CW-TYPE for aggressive environmentspanel supports:descriptionpart No. frames for modular unitstype for hoodstype for housingswith lock-in tab includedfor 2 modular units - for housing size 44.27for 3 modular units - for housing size 57.27for 4 modular units - for housing size 77.27 and 77.62 for 6 modular units - for housing size 104.27 and 104.6219,5 2)The module support frames are marked:Positioning the modules in the frames according to the respective letters is ensuring the specular assembly of modules, for which the hood will be coupled correctly to the housing.Distance for:- pneumatic contacts: max 20,5 mmA27part No.A (mm)for housings sizeCX 02 TM / TFCX 03 TM / TFCX 04 TM / TFCX 06 TM / TF, AWG 12-10 , AWG 18-14 side with reference arrow side wi

th reference arrow frames for frames f
th reference arrow frames for frames for CX TM / TF317lock-in tab)dimensions shown in mm are not binding andmay扥ichanged without notice318PE terminal adapter CGT 6.0AWG flexible copper conductor to the small PE terminalAWG) of a MIXO frame, in case AWG when the large PE terminal (6 mm/10 AWG) of the MIXO frame is already occupied by a large size PE conductor, by using the existing PE terminal adapterCGT 16CGT 10 or CGT 25.PE terminal adapters CGT 10 and CGT 25respectively a 10AWG or a 25/ 4AWG flexible copper conductor to the large PE terminal AWG) of a MIXO frame.They are offered in addition to the existing PE terminal CG吞16AWG protective earth 100A modules C堞〲 G and C堞〱 G – to give more flexibility for the combination of MIXO100A and 70A high power modules multi-core cablesCrimping is achieved by using the already available (Cembre HT CGD 10 CCGT AWG and for CGT 6.0 AWG flexible copper conductors) and CGD 25 CCG吞25AWG flexible copper conductors).CGT 10CGT 25CGT 6.0CGT 16319PE terminal adapter (10 AWG)CGT 6.0 (8 AWG)CGT 10 (6 AWG)CGT 16 (4 AWG)CGT 25headless screw M4X6, stainless s

teel, kit of 10 pcs.How to use the PE te
teel, kit of 10 pcs.How to use the PE terminal adapterCrimp the cable on the CGT adapter by usingthe CPPZ C pliers with the dies as follows:CGD 10 CCGD 16 CCGD 25 C for CGT 10, CGT 16, CGT 25 or in the smaller earth ) for CGT 6.0 of frames CX...TM/TF.To be used with bulkhead mounting housings orCannot be used with T-TYPE surface mounting housings and horizontal cable outlet hoods.For the use within bulkhead housings and vertical entry hoods it is needed to replace the M4 screw of CR VGM4CGT 16164,65,5CGT 6.0163,23,5CGT 10164,64,3CGT 25164,66,8The modular inserts must be installed in suitable frames, which are then mounted in traditional enclosures or in COB panel frames for modular unitsdimensions shown in mm are not binding andmay扥ichanged without noticeThe modular inserts must be installed in suitable frames, which are then mounted in traditional enclosures or in COB panel Alternatively, individual modules with a width of14,7 mm can be installed in plastic frames for modular unitsThe new version is formed by a single piece and has a It allows the mating of a MIXO insert includ

ing it with a corresponding MIXO insert
ing it with a corresponding MIXO insert even having - in front of the dummy module - a regular male or female module equipped with contacts, which obviously will not work. The sole exceptions to this feature are that an insert with this dummy module cannot mate an insert showing in front a CX 3/4 XDF/M,CX 04 XF/M or CX 02 HF module.dummy module for unused frame seatsdescriptionpart No. 309MIXO INSERTSMIXO modular unitsCX FMdimensions shown in mm are not binding andmay扥ichanged without notice἞3ᰛᨙ᠗J἞3ᰛᔔጛጒᔑရM༒ᬎ༚ᘘᤍJఀᴛଊᬉࠀiḝᰛ6ᤘ᜖ᤕ6ᤘ᜖ᤛLጒᄖᤐఀᴛଇᬆԈЀ؃ț἞3ᰛఀᰁſఀऀᰄᬌᔗᬊЀ؃ț἞3ᰛఀᰁſఀऀᰄᬌᔗᬂᐂ༎ᬟḝᰛ6ᤘ᜖ᤕ6ᤘ᜖ᤛLጒᄖᤐഛᴎᬏఋᬔည᠑ᬔጉࠀ᜔ࠀܛఀᴛଇᬆࢍᬌᴛԛ؈ఀᴛ֏逛؈؎ᬟḝᰛ6ᤘ᜖ᤕ6ᤘ᜖ᤛLጒᄖᤐഛԎᬏఋᬔည᠑ᬔጉࠀ᜔ࠀ܀ᬌᴛஐᬆࠛ贛邝ᬌᴛԛ؈邝ᬌᴛ֏逛؈ఔऀ莄缀蘔ऀ莄缀औऀ茀萀缀蜔ऀ莄缀궈Lऀ莄缀జ耀ఐᤗሀᖉᮉက言ဒiḝᰛ᠗Jᤛᐐਘᄛᄖሄఀᴛଇᬆԟᮍᬌᴛԛ؊iiḝᰛ᠗Jᤛ̂ěᄖሄఀᴛ

ଇᬆԞἛ贛ఀᴛԛ؊ḟఔऀ莄缀
ଇᬆԞἛ贛ఀᴛԛ؊ḟఔऀ莄缀蘔ऀ莄缀औऀ茀萀缀蜔ऀ莄缀궈Lऀ莄缀జ耀ఐᤗሀᖉᮉက言ဒ἞3ᰛᨙ᠗J἞3ᰛ脔ࠛጒᔑရM༒ᬎ༏谖Ѐ؃ț἞3ᰛఀᰁſఀऀᰄᬌᔗᬂᐂ༎ᬟḝᰛ᠗Jᤛᐐਘᄛᄖሄഛᴎᬏఋᬔည᠑ᬔጉࠀ᜔ࠀ܀ఀᴛଇᬆἛ贀ఀᴛ̛؟缝ᮁᜈ᜛Lጉࠀ᜔ࠀލ5ఀᴛԛ؟缅ᮁᜈ᜛Lጉࠀ᜔ࠀލ5ఀᴛΏ逛؟缝ᮁᜈ᜛ഛ؛ᄓ輀ᤐᬔጉࠀ᜔ࠀލ5ఀᴛએ逛؟羐ᮁᜈ᜛ഛ؛ᄓ輀ᤐᬔጉࠀ᜔ࠀލ5ఀᴛͿᬆi缝ᮁᜈ᜛Lጉ࢝ᬔᜈ鴜ᮠi궀΂莄贀؎ᬟḝᰛ᠗JᤛᐐਘᄛᄖሄഛԎᬏఋᬔည᠑ᬔጉࠀ᜔ࠀ܀ఀᴛஐᬆἛ贀邝ᬌᴛ̛؟缝ᮁᜈ᜛Lጉࠀ᜔ࠀލ5邝ᬌᴛԛ؟缅ᮁᜈ᜛Lጉࠀ᜔ࠀލ5邝ᬌᴛΏ逛؟缝ᮁᜈ᜛ഛ؛ᄓ輀ᤐᬔጉࠀ᜔ࠀލ5邝ᬌᴛએ逛؟羐ᮁᜈ᜛ഛ؛ᄓ輀ᤐᬔጉࠀ᜔ࠀލ5邝ᬌᴛͿᬆi缝ᮁᜈ᜛Lጉ࢝ᬔᜈ鴜ᮠi궀΂莄贀缙躉༖ᨒဖ缙躉༖ᨒဖЀ؃ț἞3ᰛఀᰁſఀऀᰄᬌᔗᬊఀᴛଊᬉiఀᴛଃᬉࠀఀᴛଃटఀᴛ஑ᬉࠀఀᴛ஑ᬉiఀᴛஐᬉࠀఀᴛஐᬉiఀᴛଇᬉఀᴛଇᬉ἞3ᰛᰁ缀἞3ᰛᰁ缀311MIXO R