Indicate product number and serial number if possible to be able to get the right maximum load of the sling The product label is sewn on by the customer ID: 816412
Download The PPT/PDF document "Action Product Label New product label t..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Action Product Label
New product label to be ordered from your local Liko representativeIndicate product number, and serial number if possible – to be able to get the right maximum load of the slingThe product label is sewn on by the customerPreferably onto the edgingOtherwise, carefully onto the fabricSynthetic thread is recommendedLeather needle must not be used
1
Slide22.
FabricCheck that:the fabric has no holes, is not thin or wornno wear or holes in the fabric has occurred along the borderthe fabric under the handles is intact/undamaged2
Inspection Protocol
Approved Not approved
Slide33
Inspection Protocol
2. Fabric
Slide44
Inspection Protocol
2. Fabric
Slide5Inspection Protocol
5
2. Fabric
Slide6Inspection Protocol
6
2. Fabric
Slide77
Inspection Protocol
3. Edgings
Check that the edging
is not damaged
Approved Not approved
Slide88
Inspection Protocol
3. Edgings
Slide99
Inspection Protocol
4.
Strap
Loops
5. Leg Support Loops
Check that the straps have not been damaged by the sling bar. This is most often evidenced by broken threads
Approved Not approved
Slide1010
Inspection Protocol
4. Strap Loops
5. Leg Support Loops
Slide1111
Inspection Protocol
6. Handles
Check that the seams on the handles are intact/undamaged
Approved To be actioned Not approved
Slide1212
Inspection Protocol
6. Handles
Slide13Action Handles
If the seam is torn and the fabric is undamaged, a new seam can be sewn by the customerSynthetic thread is recommendedNo leather needleAction13
Slide1414
Inspection Protocol
7. Seams
Check that threads
and seams are intact
Approved Not approved
Slide1515
Inspection Protocol
7. Seams
Slide1616
Inspection Protocol
8.
Reinforcement
seams
(bartacks)
Check that threads and seams
are intact/undamaged
Approved Not approved
Slide1717
Inspection Protocol
8. Reinforcement seams (bartacks)
Slide18Inspection Protocol
9. Shortening PositionIf the shortening position has damaged seams and a shortening of the leg support loop is desired, a knot can be tied in the loop. This will make the leg support loop approx. 10 cm (4") shorter18
Approved To be actioned
Slide19Inspection Protocol
9. Shortening Position19
Slide20Action Shortening Position
9. Shortening Position20
Slide2121
Inspection Protocol
10.
Buckle
Check the function of the belt buckle by closing it and then pulling on the belt to ensure that the buckle does not open. If the buckle opens, the assessment would be "Not approved" or "To be actioned"
Approved No be actioned Not approved
Slide22Inspection
Protocol11. Laths: If the product is not completely functioning due to missing laths, we recommend that they be completed22
Slide2323
Inspection Protocol
12.
Documentation
Check that the current instruction guide is available
Instruction guides can be downloaded free of charge from www.liko.com
Approved To be actioned
Slide24