Unscrew the crown in a downward/anti clockwise direction.Once the scre - PDF document

Unscrew the crown in a downward/anti clockwise direction.Once the screw is released, pull the crown outward gently until it clicks once and rotate the crown in a clockwise direction to changeTo change the time pull the crown once more in an outwarddirection gently until it clicks and rotate the crown in a clockwisedirection to change the time.To close the crown, push the crown inward whilst at the same timerotating the crown in a clockwise direction. It is very important tocheck that the crown is fully screwed into a closed position in orderto ensure waterproong is maintained. Pulling the crown forcefully in an outward direction could result in serious damage to the watch. Make sure that you always unscrew the crown before adjusting the date or time.All quartz watches are powered by batteries so it is not necessary to wind them. If your quartz watch stops, have the battery checked as soon as possible. A ‘dead’ battery may cause serious damage to the movement if left inside the watch too long. Quartz analogue watches contain both electronic and mechanical parts which require periodic servicing.The self-winding device in automatic watches keeps Off the wrist, it will keep going for between 28 to 48 hours. To restart the watch after this time, turn the crown 5 times then wear. Alternatively, place in an Direct contact with hairspray, perfume or detergent Leather straps deteriorate at different rates depending on climatic conditions, sweat acidity and wear and tear. If you require a replacement Dreyfuss and Co leather strap, contact your local Dreyfuss and Co stockist.All precious metal products should be cared for with a polishing cloth and stored in the presentation box All Dreyfuss & Co watches conform to the EEC directive on Nickel content. 31 42 All Dreyfuss and Co watches are guaranteed from date of purchase