MISTINGCALL 4137720846Call for the name of your nearest BETE representative67ApproxApproxApproxCoverageSprayApproxWtPipe Nozzle K 3040506080100200400OrificeinchesHeightPipeDim inozSize Number Factor ID: 864123
Download Pdf The PPT/PDF document "wwwBETEcom" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 MISTING www.BETE.com CALL 413-772-0846Ca
MISTING www.BETE.com CALL 413-772-0846Call for the name of your nearest BETE representative. 67 Approx.Approx.Approx.CoverageSprayApprox.Wt.Pipe Nozzle K 3040506080100200400Orifice(inches)HeightPipeDim. (in.)(oz.)Size Number Factor PSIPSIPSIPSIPSIPSIPSIDia. (in.)DH (in.)SizeABMetal0.0140.0160.0250.00.750.440.0190.0210.0240.0270.00.0540.0101050.0260.0260.0510.070.0121050.0410.0450.0520.0590.00.1170.0151050.0750.020.0950.110.150.210.0201261/40.970.560.110.120.140.160.220.20.024160.150.160.10.210.290.410.020.200.220.250.20.400.570.02221110.0.400.440.690.04024Flow Standard Materials: Brass, 303 Stainless Steel and 316 Stainless Steel. 0.00095 0.0060.0070.000.0100.010.00610 PJ Flow Rates and Dimensions Impingement, 90° Spray Angle, 1/8" or 1/4" Pipe Sizes 10PSI0.040.0500.0650.0900.14 Fine AtomizationDESIGN FEATURES High energy efficiencyNo whirl vanes or internal parts 1/8” or 1/4” male connectionStandard: 100-mesh 316SSscreen Optional: 200-mesh 316SSscreen Optional: 20 micron paper filterOptional: 70 micron polypropylene filter Optional welded pin and optional safetywire holeSPRAY CHARACTERISTICSFinest fog of any direct pressure nozzleSpray pattern: Cone-shaped FogSpray angle: 90°. For best 90° pattern operate nozzle at or above 60 psiFlow rates: 0.013 to 1.4 gpm Fog Male Fog Pattern PJ with polypropylene filter Dimensions are approximate. Check with BETE for critical dimension applications.Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.PJ