1CoprLJKt TKe compans products Kave been approved and beLnJ approved b tKe PeopOes RepubOLc 2 UE3 andKeOd Reader Product LntroductLon ID: 858931
Download Pdf The PPT/PDF document "UE3 andKeOd Reader User ManuaO ..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 UE3 +andKeOd Reader User ManuaO
UE3 +andKeOd Reader User ManuaO Shielded USB cable with a ferrite core must be used with this unit to ensure compliance with the Class B FCC limits. 1 Cop\rLJKt TKe compan\’s products Kave been approved and beLnJ approved b\ tKe PeopOe’s RepubOLc 2 UE3 +andKeOd Reader Product LntroductLon Product namLnJ -- -- Product serLes no. +andKeOd serLes code Abbreviation of UHF 图2 Product namLnJ UE3 +andKeOd Reader，appOLes sensor and ZLreOess RF,D tecKnoOoJ\ ZLtK U+F moduOe pLn AmerLca buLOt LnsLde and Ls abOe to read ,D cards dLspOa\ data store data and transmLt data tKrouJK ZLreOess tecKnoOoJ\ aOO at once. TKe product Kas PC pOastLc KousLnJ of KLJK resLstance and Ls Zaterproof dust-proof antL-statLc and durabOe. TKe outstandLnJ features of tKe KandKeOd reader are user-frLendO\ of OoZ poZer consumptLon and KLJK TKLs user manuaO provLdes operatLon and servLce LnstructLon of UE3 KandKeOd reader and TKLs cKapter Lntroduces tKe tecKnLcaO spec and ZorNLnJ standard of tKLs product. CKapter One: Safet\ ZarnLnJs S\mboO LOOustratLon ★ Severe danJer ma\ be caused to tKreat safet\. PrecautLons and remLnder. ※ Notes and descrLptLon. ！ :arnLnJs Lt ma\ affect or damaJe tKe Lnstrument f� 5;者င怅瀄쀅 စ态က TKe batter\ Ls specLaOO\ produced for tKe devLce. Do not appO\ unautKorL]ed batterLes Part 1 System composition UE3
2 +andKeOd Reader PortabOe KandKeOd devLc
+andKeOd Reader PortabOe KandKeOd devLce for user abOe to read cards store data and transmLt data tKrouJK ZLreOess tecKnoOoJ\ to manaJement center. U+FRF,D contactOess card readLnJ :,F, ZLreOess data transmLssLon ,ndustrLaO product desLJn sKatter-resLstant Zaterproof RF,D taJ 5 1.User presses CENTER button for tZo seconds to turn devLce on. DevLce Ls Ln Read 2.Read Mode: User presses CENTER to read 6 Little Mango UHF Reader Press CENTER button to read tag SETTINGS EPC:0c210531607300312202137f Press CENTER button to read tag SETTINGSEPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS 7 1. ,n Read Mode user presses /EFT button to dLspOa\ read “SettLnJs”. User uses UP and DO:N button 2. User seOects T,D and presses /EFT button for “O.”. A beep ZLOO confLrm tKe 3. User presses R,*+T button to Jo bacN to Select Read Mode :EPC TID User Memory Adjust Power Level OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK BACK Little Mango UHF Reader Press CENTER button to read tag SETTINGS 4. User presses /EFT button for “O.” to 5. A beep confLrms tKe 6.User presses R,*+T button to return to Power Level 15dB Press UP or DOWN to change OK BACK Save Success! Power Level 15dB Press UP or DOWN to change OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK BACK DevLce Ls on. 1. User connects Kand KeOd devLce to computer ZLtK USB cabOe. User presses tKe DO:Nbutton to sZLtcK to Memor\ 2. Computer appOLcatLon can access and doZnOoad Data .t[t fLOe. See AppendL[ A EPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS ,D CoOumn Name CoOumn Format E[ampOe Date-TLme Stamp < { "@context": "http://schema.org", "@type": "ImageObject", "contentUrl": "https://www.docslides.com/slides/858931/NAN__andKeOd_Reader_PortabOe_KandKeOd_devLc", "description": "__andKeOd_Reader_PortabOe_KandKeOd_devLce_for_user__x000f__abOe_to_read_cards__x000f__store_data_and_transmLt_data_tKrou", "width": "1240" }
3 2/2121:35:45 T,D or User EPC”
2/2121:35:45 T,D or User EPC” “T,D” or “U,D”T,D 102. FunctLon buttons ǏCenter buttonǐPress center button and KoOd for 1 sec to turn on tKe devLce or to Charging DurLnJ normaO operatLon tKere’s batter\ LndLcator Lcon on tKe up rLJKt corner of ,f batter\ voOtaJe Ls OoZer tKan 3.63V batter\ LndLcator Lcon sKoZs onO\ one JrLdtKere ZLOO be OoZ batter\ ZarnLnJ on dLspOa\ paneO ZKen \ou turn on tKe devLce accompanLed :Ken paneOs sKoZs OoZ batter\ ZarnLnJ or batter\ LndLcator sKoZs onO\ one JrLd Lt NoZ tKe reader ZLOO Kave /ED red OLJKt cKarJLnJ LndLcator. :Ken Lt Ls fuOO\ cKarJed tKe /ED OLJKt ZLOO turn Jreen LndLcatLnJ tKe reader Ls read\ for normaO operatLon. 2˅DurLnJ operatLon tKe devLce ma\ Jenerate Keat and Lf tKe Keat does not e[ceed 60℃ 3˅TKere mLJKt be some smaOO dLfference on batter\ functLon so cKarJLnJ tLme ma\ be 115˅,f tKe batter\ Ls not ZorNLnJ normaOO\ after cKarJe-dLscKarJe for 3-4 tLmes pOease ˅Batter\ Ls of OoZ sKocN-resLstance so pOease avoLd stronJ Lmpact onto tKe reader. ˅POease don’t use batter\ or cKarJer tKat Ls not standard accessorLes to avoLd ˅,f tKe reader Kas been Oeft unattended for OonJ tLme pOease cKarJe tKe batter\ before POease do not dLsmantOe tKe batter\ cKarJe tKe batter or connect tKe devLce for 12 The handheld reader is of intelligent design and easy to use, requiring little special maintenance. However, for purposes of its longer lifespan, please follow below tips: Instrument maintenancePOease use tKe Lnstrument Ln specLfLed temperature ranJe ℃˅and reOatLve KumLdLt
4 \˄≤ %˅ or Lt
\˄≤ %˅ or Lt ma\ cause measurement devLatLon of tKe devLce and affect TKe Lnstrument appOLes automatLc mLcro computer adMustment and requLres no screZ. ,t Ls suJJested tKat user sKouOd not open tKe Lnstrument ZLtKout autKorL]ed Please use charger specified by manufacturer, and charge according to instructions. Do not use non-specified charger as it may cut short the lifespan of battery and cause the battery and components Do not throw or knock the instrument. Any salvage treatment to the instrument may easily cause damage of internal structure and degrade the working functions. Do not use strong chemical products, cleaners or strong detergents to clean instrument. Please keep the instrument clean and dry, and avoid rain shower. If the instrument is immersed by water, please turn if off, wipe out Do not store the instrument in a place of high temperature, as it may affect the components, damage battery or deform or melt the plastic housing. If the instrument or any part of it cannot work properly, please bring it to the nearest authorized maintenance stores specified by manufacturer, or turn it to factory for maintenance. ② :Ken tKe Lnstrument Ls sent for maLntenance tKe sensor tLp sKouOd be JentO\ ZLped 13CKapter Four：TroubOe-sKootLnJ TroubOes and soOutLons TroubOes Root cause SoOutLons No dLspOa\ Out of poZer CKarJe poZer UnstabOe dLspOa\ PaneO probOem RepOace paneO No beep sound Beep bu]]er probOem RepOace Does not read card Reader OLne damaJe Factor\ repaLr TecKnLcaO requLrement 5.1 *eneraO requLrement：PoZer voOtaJe: 3.V recKarJeabOe /L-batter\ 5.2 CosmetLc and mecKanLcaO structure TKe outer KousLnJ of KandKeOd reader sKouOd be ZLtKo
5 ut scratcKes no coOor fadLnJ or
ut scratcKes no coOor fadLnJ or permanent staLns no apparent deform or scratcKes. 5.3 BasLc functLon 5.3.1 TKe KandKeOd reader can read RF,D card record and restore data and aOOoZ user to LnquLre data dLrectO\. 5.3.2 TKere are beep bu]]er and Jreen /ED OLJKt to LndLcate successfuO readLnJ of card. 4.3.3 TKe LnternaO memor\ storaJe medLum Ls 2*B. 5.3.4 TKe KandKeOd reader Kas coOor paneO dLspOa\ camera functLon and ZLfL ZLreOess data transmLssLon functLon.5.3.5 TKe KandKeOd reader can be connected ZLtK PC vLa USB cabOe and transmLt data. 5.4 Card readLnJ functLon performance 5.4.1 RecoJnLtLon rate: 100% ˗Accurac\ rate：100% 5.4.2 UE3 readLnJ dLstance：≥3CM 5.5 ,ndustrLaO protectLon OeveO of KousLnJ TKe ,P OeveO of tKe KandKeOd reader Ls：,P54 3.7DCV 250mA 14CKapter SL[：Product servLce and tecKnLcaO support Product servLce ZoNo Juarantees tKe product produced and soOd b\ Lt sKouOd Kave no materLaO or crafts defects and Jrants one \ear of Juarantee from tKe date of deOLver\ from autKorL]ed deaOers. For an\ quaOLt\ defect ZoNo ZLOO repaLr or repOace tKe product accordLnJ to specLfLcatLons For maLntenance or product maLntenance OLst pOease contact tKe nearest maLntenance E[cept Juarantees tKat are OLsted Ln tKLs summar\ or an\ otKer appOLcabOe provLsLon of assurance poOLc\ ZoNo does not provLde an\ otKer e[press or LmpOLed Zarrant\. ,ncOudLnJ but not OLmLted to tradabLOLt\ of tKe product and specLaO purpose suLtabLOLt\ for an\ LmpOLed ZarrantLes. ,n an\ case ZoNo sKaOO bear no responsLbLOLt\ for LndLrect specLaO Man\ products of ZoNo Kave pre-OonJ Juarantee perLods and adMustment pOans. POease 15: 5F
6 AdmLnLstratLon BuLOdLnJ
AdmLnLstratLon BuLOdLnJ -Ln[LnJ ,ndustr\ DLstrLct DonJbLn Road 16 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded USB cable with a ferrite core must be used wit
7 h this unit to ensure compliance with th
h this unit to ensure compliance with the Class B FCC limits. 1 The companyÿs products have been approved and being approved by the Peopleÿs Republic 2 oduct introduction Product naming -- -- Product series no. Handheld series code Abbreviation of UHF 2 Product naming Readerˈapplies sensor and wireless RFID technology, with UHF module produced in America built inside, and is able to read ID cards, display data, store data and transmit data through wireless technology all at once. The product has PC plastic housing of high resistance, and is waterproof, dust-proof, anti-static and durable. The outstanding features of the handheld reader are user-friendly, of low power consumption and high This user manual provides operation and service instruction of , and Chapter Two: Settings and operation instruction Chapter Five：Technical specification U E 3 This chapter introduces the technical spec and working standard of this product. ƾ Severe danger may be caused to threat safety. * Precautions and reminder. ※ Notes and description. ʽ Warnings, it may affect or damage the instrument functions. the device in a flammable or explosive The battery is specially produced for the device. Do not apply unauthorized batteries Settings and operation instructionPart 1 System composition UE3 Reader Portable handheld device for user, able to read cards, store data and transmit data through wireless technology to management center. UH
8 FRFID contactless card reading WIFI wir
FRFID contactless card reading WIFI wireless data transmission Industrial product design, shatter-resistant, waterproof RFID tag 5 1.User presses CENTER button for two seconds to turn device on. Device is in Read 2.Read Mode: User presses CENTER to read 6 Little Mango UHF Reader Press CENTER button to read tag SETTINGS EPC:0c210531607300312202137f Press CENTER button to read tag SETTINGSEPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS 7 1. In Read Mode, user presses LEFT button to display read “Settings”. User uses UP and DOWN button 2. User selects TID and presses LEFT button for “OK”. A beep will confirm the 3. User presses RIGHT button to go back to Select Read Mode :EPC TID User Memory Adjust Power Level OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK BACK Little Mango UHF Reader Press CENTER button to read tag SETTINGS 4. User presses LEFT button for “OK” to 5. A beep confirms the 6.User presses RIGHT button to return to Power Level 15dB Press UP or DOWN to change OK BACK Save Success! Power Level 15dB Press UP or DOWN to change OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK BACK Device is on. 1. User connects hand held device to computer with USB cable. User presses the DOWNbutton to switch to Memory Computer application can access and download Data .txt file. See Appendix A EPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS ID Column Name Column Format Example Date-Time Stamp YY/MM/DDHH:MM:SS TID or User EPC” ,“TID” ,or “UID”TID 2. Function buttons 【Center button】Press center button and hold for 1 sec to turn on the device, or to Charging During normal operatio
9 n, thereÿs battery indicator icon on t
n, thereÿs battery indicator icon on the up right corner of If battery voltage is lower than 3.63V (battery indicator icon shows only one grid),there will be low battery warning on display panel when you turn on the device, accompanied When panels shows low battery warning or battery indicator shows only one grid, it Now the reader will have LED red light charging indicator. When it is fully charged, the LED light will turn green, indicating the reader is ready for normal operation. 2）During operation the device may generate heat, and if the heat does not exceed 60℃ 3）There might be some small difference on battery function, so charging time may be three times to reach the best working 5）If the battery is not working normally after charge-discharge for 3-4 times, please 7）Battery is of low shock-resistance, so please avoid strong impact onto the reader. 8）Please donÿt use battery or charger that is not standard accessories to avoid 9）If the reader has been left unattended for long time, please charge the battery before Please do not dismantle the battery, charge the batter or connect the device for The handheld reader is of intelligent design and easy to use, requiring little special maintenance. However, for purposes of its longer lifespan, please follow below tips: Instrument maintenancePlease use the instrument in specified temperature range (℃）and relative humidity（≤98%）, or it may cause measurement deviation of the device and affect The instrument applies automatic micro computer adjustment, and requires no screw. It is suggested that user should not open the instrument without authorized Please use charger specified by manufacturer, and charge according to instructio
10 ns. Do not use non-specified charger as
ns. Do not use non-specified charger as it may cut short the lifespan battery and components Do not throw or knock the instrument. Any salvage treatment to the instrument may easily cause damage of internal structure and degrade the working functions. Do not use strong chemical products, cleaners or strong detergents to clean instrument. Please keep the instrument clean and dry, and avoid rain shower. If the instrument is immersed by water, please turn if off, wipe out Do not store the instrument in a place of high temperature, as it may affect the components, damage battery or deform or melt the plastic housing. If the instrument or any part of it cannot work properly, please brmaintenance stores specified by manufacturer, or turn it to factory for maintenance. ② When the instrument is sent for maintenance, the sensor tip should be gently wiped 13 Chapter Five：Technical specification Technical requirement 5.1 General requirement：Power voltage: 3.7V rechargeable Li-battery 5.2 Cosmetic and mechanical structure The outer housing of handheld reader should be without scratches, no color fading or permanent stains, no apparent deform or scratches. 5.3 Basic function 5.3.1 The handheld reader can read RFID card, record and restore data, and allow user to inquire data directly. 5.3.2 There are beep buzzer and green LED light to indicate successful reading of card. 4.3.3 The internal memory storage medium is 2GB. 5.3.4 The handheld reader has color panel display, camera function and wifi wireless data transmission function.5.3.5 The handheld reader can be connected with PC via USB cable and transmit data. 5.4 Card reading function performance 5.4.1 Recognition rate: 100% ；Accuracy rate：100% 5.4.
11 2 UE3 reading distance：≥3CM 5.5 Ind
2 UE3 reading distance：≥3CM 5.5 Industrial protection level of housing The IP level of the handheld reader is：IP54 3.7DCV 250mA Zoko guarantees the product produced and sold by it should have no material or crafts defects and grants one year of guarantee from the date of delivery from authorized dealers. For any quality defect, Zoko will repair or replace the product according to specifications For maintenance or product maintenance list, please contact the nearest maintenance Except guarantees that are listed in this summary or any other applicable provision of assurance policy, Zoko does not provide any other express or implied warranty. Including, but not limited to tradability of the product and special purpose, suitability for any implied warranties. In any case, Zoko shall bear no responsibility for indirect, special Many products of Zoko have pre-long guarantee periods and adjustment plans. Please : 5F, Administration Building, Jinxing Industry District, Dongbin Road, Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If thi
12 s equipment does cause harmful interfere
s equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded USB cable with a ferrite core must be used with this unit to ensure compliance with the Class B FCC limits. 1 The companyÿs products have been approved and being approved by the Peopleÿs Republic 2 oduct introduction Product naming -- -- Product series no. Handheld series code Abbreviation of UHF 2 Product naming Readerˈapplies sensor and wireless RFID technology, with UHF module produced in America built inside, and is able to read ID cards, display data, store data and transmit data through wireless technology all at once. The product has PC plastic housing of high resistance, and is waterproof, dust-proof, anti-stati
13 c and durable. The outstanding features
c and durable. The outstanding features of the handheld reader are user-friendly, of low power consumption and high This user manual provides operation and service instruction of , and Chapter Two: Settings and operation instruction Chapter Five：Technical specification U E 3 This chapter introduces the technical spec and working standard of this product. ƾ Severe danger may be caused to threat safety. * Precautions and reminder. ※ Notes and description. ʽ Warnings, it may affect or damage the instrument functions. the device in a flammable or explosive The battery is specially produced for the device. Do not apply unauthorized batteries Settings and operation instructionPart 1 System composition UE3 Reader Portable handheld device for user, able to read cards, store data and transmit data through wireless technology to management center. UHFRFID contactless card reading WIFI wireless data transmission Industrial product design, shatter-resistant, waterproof RFID tag 5 1.User presses CENTER button for two seconds to turn device on. Device is in Read 2.Read Mode: User presses CENTER to read 6 Little Mango UHF Reader Press CENTER button to read tag SETTINGS EPC:0c210531607300312202137f Press CENTER button to read tag SETTINGSEPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS 7 1. In Read Mode, user presses LEFT button to display read “Settings”. User uses UP and DOWN button 2. User selects TID and presses LEFT button for “OK”. A beep will confirm the 3. User presses RIGHT button to go back to Select Read Mode :EPC TID User Memory Adjust Power Level OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK B
14 ACK Little Mango UHF Reader Press CENTER
ACK Little Mango UHF Reader Press CENTER button to read tag SETTINGS 4. User presses LEFT button for “OK” to 5. A beep confirms the 6.User presses RIGHT button to return to Power Level 15dB Press UP or DOWN to change OK BACK Save Success! Power Level 15dB Press UP or DOWN to change OK BACK Select Read Mode: EPC TID User Memory Adjust Power Level OK BACK Device is on. 1. User connects hand held device to computer with USB cable. User presses the DOWNbutton to switch to Memory Computer application can access and download Data .txt file. See Appendix A EPC:2y345asdf43443456345899ddab Press CENTER button to read tag SETTINGS ID Column Name Column Format Example Date-Time Stamp YY/MM/DDHH:MM:SS TID or User EPC” ,“TID” ,or “UID”TID 2. Function buttons 【Center button】Press center button and hold for 1 sec to turn on the device, or to Charging During normal operation, thereÿs battery indicator icon on the up right corner of If battery voltage is lower than 3.63V (battery indicator icon shows only one grid),there will be low battery warning on display panel when you turn on the device, accompanied When panels shows low battery warning or battery indicator shows only one grid, it Now the reader will have LED red light charging indicator. When it is fully charged, the LED light will turn green, indicating the reader is ready for normal operation. 2）During operation the device may generate heat, and if the heat does not exceed 60℃ 3）There might be some small difference on battery function, so charging time may be three times to reach the best working 5）If the battery is not working normally after charge-discharge for 3-4 times, please 7）Battery is of low shock-resistance,
15 so please avoid strong impact onto the r
so please avoid strong impact onto the reader. 8）Please donÿt use battery or charger that is not standard accessories to avoid 9）If the reader has been left unattended for long time, please charge the battery before Please do not dismantle the battery, charge the batter or connect the device for The handheld reader is of intelligent design and easy to use, requiring little special maintenance. However, for purposes of its longer lifespan, please follow below tips: Instrument maintenancePlease use the instrument in specified temperature range (℃）and relative humidity（≤98%）, or it may cause measurement deviation of the device and affect The instrument applies automatic micro computer adjustment, and requires no screw. It is suggested that user should not open the instrument without authorized Please use charger specified by manufacturer, and charge according to instructions. Do not use non-specified charger as it may cut short the lifespan battery and components Do not throw or knock the instrument. Any salvage treatment to the instrument may easily cause damage of internal structure and degrade the working functions. Do not use strong chemical products, cleaners or strong detergents to clean instrument. Please keep the instrument clean and dry, and avoid rain shower. If the instrument is immersed by water, please turn if off, wipe out Do not store the instrument in a place of high temperature, as it may affect the components, damage battery or deform or melt the plastic housing. If the instrument or any part of it cannot work properly, please brmaintenance stores specified by manufacturer, or turn it to factory for maintenance. ② When the instrument is sent for maintenance, the sens
16 or tip should be gently wiped 13 Chapt
or tip should be gently wiped 13 Chapter Five：Technical specification Technical requirement 5.1 General requirement：Power voltage: 3.7V rechargeable Li-battery 5.2 Cosmetic and mechanical structure The outer housing of handheld reader should be without scratches, no color fading or permanent stains, no apparent deform or scratches. 5.3 Basic function 5.3.1 The handheld reader can read RFID card, record and restore data, and allow user to inquire data directly. 5.3.2 There are beep buzzer and green LED light to indicate successful reading of card. 4.3.3 The internal memory storage medium is 2GB. 5.3.4 The handheld reader has color panel display, camera function and wifi wireless data transmission function.5.3.5 The handheld reader can be connected with PC via USB cable and transmit data. 5.4 Card reading function performance 5.4.1 Recognition rate: 100% ；Accuracy rate：100% 5.4.2 UE3 reading distance：≥3CM 5.5 Industrial protection level of housing The IP level of the handheld reader is：IP54 3.7DCV 250mA Zoko guarantees the product produced and sold by it should have no material or crafts defects and grants one year of guarantee from the date of delivery from authorized dealers. For any quality defect, Zoko will repair or replace the product according to specifications For maintenance or product maintenance list, please contact the nearest maintenance Except guarantees that are listed in this summary or any other applicable provision of assurance policy, Zoko does not provide any other express or implied warranty. Including, but not limited to tradability of the product and special purpose, suitability for any implied warranties. In any case, Zoko shall bear no responsibility for indirect
17 , special Many products of Zoko have pre
, special Many products of Zoko have pre-long guarantee periods and adjustment plans. Please : 5F, Administration Building, Jinxing Industry District, Dongbin Road, Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired