ORDERING INFORMATION - PDF document

AQ-J ORDERING INFORMATION 1. AQ-J Solid State RelaysStandard Packing; carton: 10 pcs., case: 200 pcs.Note: * Random type also available. Please inquire. Compact high capacity, type added Q-J RELAYSTypeLoad currentLoad voltageInput voltagePart No.75V to 264V AC4 to 6V DCAQJ112V10 to 18V DCAQJ119V18 to 28V DCAQJ116V4 to 6V DCAQJ212V10 to 18V DCAQJ219V18 to 28V DCAQJ216V4 to 6V DCAQJ412V10 to 18V DCAQJ419V18 to 28V DCAQJ416V UL (60950-1) reinforcedinsulation compliant FEATURES1. Compact SizeApprox 40% reduction in required space achieved in the footprint area compared with the previous model (AQ-R relay)2. Built-in varistor3. Reverse input connection prevention function4. Labor Saving (tab terminal)5. Heat sink combined types ready to mount on DIN rail added (Radiating grease and screws assembly process 6. Output arrangement 1a and 1a ailable in the heat sink combined Note: * International standards are acquired for AQ-J SSR stand-alone, not applied to heat sink combined type.TYPICAL APPLICATIONS1. Kitchen appliances2. Vending machine3. Injection molding machine4. Packing machine5. Amusement machine Slim heat sink combined type Compliance with RoHS Directive New AQ-J Solid State RelaysOutput type1: 10A, 75V to 264V AC AQJ ƒŒƒCƒ„[ 1 &#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;&#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;�!�L�L���2�I�G�H�T�S���2�E�S�E�R�V�E�D���Ú���# AQ-J 2. AQ-J SSR Slim Heat Sink Combined TypeStandard

Packing; no carton, case: 10 pcs.Note: * Random type also available. Please inquire. 3. AccessoriesSPECIFICATIONS1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 20input ripple: 1% or less)Notes:*1Refer to REFERENCE DATA Ò1. Load current vs. ambient temperatureÓ .*2When the load current is less than the rated minimum load current, please refer to ÒCautions for Use of SSRÓ. 2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 20input ripple: 1 % or less)Notes:*1Refer to REFERENCE DATA Ò1. Load current vs. ambient temperatureÓ .*2When the load current is less than the rated minimum load current, please refer to ÒCautions for Use of SSRÓ.Output conÞgurationTypeLoad currentLoad voltageInput voltagePart No.75V to 264V AC4 to 6V DCAQJ112VY10 to 18V DCAQJ119VY18 to 28V DCAQJ116VY4 to 6V DCAQJ412VY10 to 18V DCAQJ419VY18 to 28V DCAQJ416VY4 to 6V DCAQJ112VW10 to 18V DCAQJ119VW18 to 28V DCAQJ116VW4 to 6V DCAQJ412VW10 to 18V DCAQJ419VW18 to 28V DCAQJ416VWTypePart No.Packaged quantity Slim heat sink (28mm wide) (Mountable on a DIN rail)AQP-HS-SJ10A No carton, 10 in a case Slim heat sink (45mm wide) (Mountable on a DIN rail)AQP-HS-SJ20A No carton, 8 in a case Standard heat sink (10A and 15A)AQP-HS-J10A 5 in a carton, 20 in a case Standard heat sink (25A only)AQP-HS-J25A No carton, 5 in a case DIN rail mounting plateAQP-DPJ 5 in a carton, 50 in a casePart No.AQJ112VAQJ212VAQJ412VAQJ119VAQJ219VAQJ419VAQJ116VAQJ216VAQJ416VRated voltage5V DC12V DC24V DCInput voltage4 to 6V DC10 to 18V DC18 to 28V DCInput impedanceApprox. 0.26kApprox. 0.8kApprox. 1.6kDrop-out vol

tageMin. 1V DCPart No.AQJ112VAQJ119VAQJ116VAQJ212VAQJ219VAQJ216VAQJ412VAQJ419VAQJ416VMax. load current*10A15A25ALoad voltage75 to 264V ACFrequency45Hz to 65HzNon-repetitive surge current100A150A250AMax. ÒOFF-stateÓ leakage currentMax. 5mAMax. ÒON-stateÓ voltage dropMax. 1.6VMin. load current*Part No.AQJ112V(YáW)AQJ412V(YáW)AQJ119V(YáW)AQJ419V(YáW)AQJ116V(YáW)AQJ416V(YáW)Rated voltage5V DC12V DC24V DCInput voltage4 to 6V DC10 to 18V DC18 to 28V DCInput impedanceApprox. 0.26kApprox. 0.8kApprox. 1.6kDrop-out voltageMin. 1V DCPart No.AQJ112VYAQJ119VYAQJ116VYAQJ412VYAQJ419VYAQJ416VYAQJ112VWAQJ119VWAQJ116VWAQJ412VWAQJ419VWAQJ416VWOutput arrangement1a1a Max. load current*10A20A10A15ALoad voltage75 to 264V ACFrequency45Hz to 65HzNon-repetitive surge current100A250A100A250AMax. ÒOFF-stateÓ leakage currentMax. 5mAMax. ÒON-stateÓ voltage dropMax. 1.6VMin. load current* �E�D���Ú���# AQ-J 3. Characteristics (Measurement condition: at 20input ripple: 1% or less)REFERENCE DATA(1) AQ-J Solid State Relays1. Load current vs. ambient temperature Use load current within range speciÞed in the Þgure below ItemCharacteristicsRemarksOperate time, max.1/2 cycle of voltage sine wave + 1msRelease time, max.1/2 cycle of voltage sine wave + 1msInsulation resistance, min.100M between input, output and caseat 500 V DCBreakdown voltage3,000 Vrms between input and outputfor 1min.2,500 Vrms between input, output and caseVibration resistanceSSR stand-alone: 10 to 55Hz, double amplitude of 1.5mmSlim heat sink combined type: 10 to 55Hz, double amplitude of 0.75mmX, Y, Z axesShock resistanceSSR stand-al

one: Min. 980m/sSlim heat sink combined type: Min. 197m/sX, Y, Z axesAmbient temperatureÐ30 to +80Non-condensing at low temperaturesStorage temperatureÐ30 to +100Operational methodZero-cross (Turn ON and Turn OFF) Tested condition:conductive compound (Ex. Toshiba sillicone YG6111 or TSK5303) of similar coating to improve cooling2) Without external heat sinkIf the mounting surface is not metallic and a heat sink is not used, expose the bottom surface and plate surface to improve heat 3) The current value is per 1a.(2)-1. 15 A type (when using iron plate)(A) slim heat sinkAQP-HS-SJ20A(B) slim heat sinkAQP-HS-SJ10A(C) standard heat sinkAQP-HS-J10A(D) DIN rail mounting plateAQP-DPJ(E) standard heat sinkAQP-HS-J25A 100806040200 When a single unit is mounted on an (A) slim heat sink When a single unit is mounted on an (B) slim heat sink When two units are mounted When two units are mounted When using an (D) DIN rail mounting plate Ambient temperature, 0-2020406080 Ambient temperature, °CLoad current, A When using 200 × 200 × t2 mm iron plate When using 100 × 100 × t1.6 mm iron plate When using 150 × 150 × t1.6 mm iron plate (2)-2. 15 A type (when using a heat sink)(3)-1. 25 A type (when using iron plate)(3)-2. 25 A type (when using a heat sink) 100806040200 When a single unit is mounted on an When a single unit is mounted on an (C) standard heat sink When two units are mounted When two units are mounted When using an (D) DIN rail mounting plate Ambient temperature, 0-2020406080 Ambient temperature, °CLoad current, A When using 300 × 300 × t2 mm iron plate When using 150 × 150 × t1.6 mm iro

n plate When using 100 × 100 × t1.6 mm iron plate When using 250 × 250 × t2 mm iron plate When using 200 × 200 × t2 mm iron plate 100806040200 When two units When a single unit is mounted on an When two units are When a single unit is mounted on an (C) standard heat sink When a single unit is mounted on an (A) When using an (D) DIN rail mounting plate Ambient temperature, 2. Non-repetitive surge current vs. carrying time3. Input current vs. input voltage characteristics 110 10A type 15A type 25A type 101550202535 (4 to 6V DC) (10 to 18V DC) (18 to 28V DC) �E�D���Ú���# AQ-J (2) AQ-J SSR Slim Heat Sink Combined Type1. Load current vs. ambient temperature Use load current within range speciÞed in the Þgure below (1) Output arrangement: 1a(2) Output arrangement: 1a Note: When two contacts are operated simultaneously. In the case of a single-contact operation, the rating of (1) AQJ11VY, AQJ41VY applies. 100806040200 AQJ41VY AQJ11VY Ambient temperature, 100806040200 AQJ41VW(Per 1a) AQJ11VW Ambient temperature, 2. Surge current vs. carrying time3. Input current vs. input voltage characteristics 110 AQJ41V AQJ11V No. of cycles at 60 Hz 1015502030 AQJ12V AQJ19V Input voltage, V mark can be downloaded from: http://panasonic-electric-works.net/ac1. AQ-J Stand Alone External dimensions 4.31.67.954.552-1.2 dia.Output side 1 and 2 terminals: #250 type, t = 0.8 .031Input side 3 and 4 terminals: #110 type, t = 0.5 .0202-1.65 dia.4.3 dia. 30 max.8.45.56.352.8 7.1 30 28 38 175.169.063.313.1792-.047 dia.2-.065 dia..169 dia.1.181 max..

331.217.250.2801.1811.1021.496.669.197SchematicMounting dimensions Load power sourceInput power 123 +ŠLoad 2-4.3 dia. or M4 30+0.2Š0.11.181+.008Š.0042-.169 dia. or M4 ƒŒƒCƒ„[ 1 &#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;&#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;�!�L�L���2�I�G�H�T�S���2�E�S�E�R�V�E�D���Ú���# AQ-J ACCESSORIES 2.-(1) Slim Heat Sink Combined TypeOutput Arrangement: 1a External dimensions ÒAÓ part 70707 6.236.0631.6 Note:When using on a DIN rail, please install so that the ÒAÓ part is on top.Mounting dimensions (Top view)Load power Input power +ŠLoad 2-4.6 dia. or M42-.181 dia. or M4 2.-(2) Slim Heat Sink Combined TypeOutput Arrangement: 1a External dimensions AQP810 ÒAÓ part Note:When using on a DIN rail, please install so that the ÒAÓ part is on top.Note:Use caution for AQ-J terminal numbers.Mounting dimensions (Top view)Load power Input power +ŠLoad 2-4.6 dia. or M42-.181 dia. or M4 AQP-HS-SJ10A Slim Heat Sink External dimensions AQP810 (Effective screw depth: 6mm3030 ÒAÓ part1.1811.181 833.268 Note:When using on a DIN rail, please install so that the ÒAÓ part is on top.Mounting dimensions (Top view) 2-4.6 dia. or M42-.181 dia. or M4 AQP-HS-SJ20A Slim Heat Sink External dimensions AQP812 ÒAÓ part (Effective screw depth: 6mm 833.268451.772 Note:When using on a DIN rail, please install so that the ÒAÓ part is on top.Mounting dimensions (Top view) 2-4.6 dia.

or M42-.181 dia. or M4 ƒŒƒCƒ„[ 1 &#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;&#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;�!�L�L���2�I�G�H�T�S���2�E�S�E�R�V�E�D���Ú���# AQ-J AQP-HS-J10A Standard Heat Sink (for 10A and 15A types) External dimensions R.087 3-M4R2.2 1003.937 47.61.874 301.181 903.543 501.9694.4.1734.4.173 542.126 451.772 28.51.122 24.5.965 33.31.311 803.150 100+0.5Š1.5+.020Š.0593.9372.0792.0791.5.05911.1.4371.59.354Mounting dimensions 90±0.13.543±.004 50±0.21.969±.0084-M4 or 4.4 dia.4-M4 or .173 dia. AQP-HS-J25A Standard Heat Sink (for 25A type) External dimensions 3-M427133 52 47.5 305 119 150 1324-R2.5.098.079.276.512.1182.0471.8701.181.1974.6855.9065.1978264463.2282.5201.8111201001424.7243.9375.591Mounting dimensions 4-M4.5 or 5 dia. 132±0.1 119±0.14-M4.5 or .197 dia.5.197±.0044.685±.004 AQP-DPJ DIN Rail Mounting Plate External dimensions 3-M415.5916.23616.512.1.476.0631.64.6 dia..181 dia.4.6×5.6 elliptical hole.181×.2201003.937 19.748 301.181 903.543 47.61.874 ƒŒƒCƒ„[ 1 &#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;&#x/Mat;&#xrix ;&#x[1 0;&#x 0 1;&#x 199;&#x.5 3;.13;‡ ];&#x/Ver;&#xtica;&#xl fa;&#xlse ;�!�L�L���2�I�G�H�T�S���2�E�S�E�R�V�E�D���Ú���# AQ-J NOTES Recommended Temperature Controllers Mounting railAT8-DLA1 15 5 5 10 1,000 5.5 351.5 272

4 1540-5.5×15 slot 15 10 15 7.5 2.75R .591.591.394.591.108RFastening plate 1250M4 10 10 ATA4806UP .4721.969.394.394 CAD Data 1. Part number indicationThe AQ-J slim heat sink combined type is a product combining the AQ-J SSR and AQ-J SSR heat sinks. The part numbers are indicated on each AQ-J SSR and Ex) In the case of AQJ112VY Part number of AQ-J SSR: AQJ112V Part number of the heat sink: AQP810*When using these parts, please refer to REFERENCE DATA, Ò1. Load current vs. ambient temperatureÓ.Note: * The Japanese part number is printed on the following accessories in stead of Global part number. Please refer to the below chart for interpretation from Japanese to Global part number.Japanese Part No.Part No.AQP810AQP-HS-SJ10AAQP812AQP-HS-SJ20AAQP811AQP-HS-J10AAQP808AQP-HS-J25A(AQ-N 25A)AQP804AQP-HS-30/40APlate (for AQ-J)AQP809AQP-DPJPlate (for AQ-N)AQP803AQP-DPMounting RailATA48011AT8-DLA1Terminal Cover (for AQ-N)AQP807AQP-NPC 48mm emperature Contr&#xKT4H;&#x T60;&#x.100;ollerOur temperature controller is recommended for use with our Solid State Relays.Â¥ Data can be collected using the RS485 communications interface via a PLC.Â¥ Improved visibility using a negative type LCD and backlight.Substitute part numbers*For detailed product information about temperature controllers, please refer to our website:http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/Power supplyControl outputPart No.100 to 240 V ACRelay contactAKT4H111100 �E�D���Ú���# Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: :