EN USER MANUAL 2 Table of Contents Installing the Vedo App 3 New system con31guration 4 For local connection ID: 839352
Download Pdf The PPT/PDF document "Operating manual for Vedo App 220 for d..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 EN USER MANUAL Operating manual for Ved
EN USER MANUAL Operating manual for Vedo App 2.2.0 - for devices: 2 Table of Contents Installing the Vedo App 3 New system con guration 4 For local connection ........................................................................................................... 4 For remote connection 4 CONNECTING TO A SYSTEM 5 DELETING A SYSTEM CONFIGURATION .................................................................................................... 5 Using the Vedo App 6 RECEIVING AN ALARM NOTIFICATION ...................................................................................................... 6 In the event of a zone alarm with dedicated camera 6 ANSWERING A CALL 7 VIEWING AND CAPTURING IMAGES/VIDEOS FROM A CAMERA OR CALLING AN APP 8 VIEW/SHARE OR DELETE RECORDED VIDEOS OR SNAPSHOTS ............................................................ 9 VIEW/SHARE OR DELETE RECORDED VIDEOS OR SNAPSHOTS ............................................................ 9 View/share videos/screenshots 9 Delete videos/screenshots 9 VIEWING THE STATUS OF THE SYSTEM AREAS ....................................................................................... 10 FUNCTIO
2 N KEYS 10 VIEWING AND CONTROLLING INTR
N KEYS 10 VIEWING AND CONTROLLING INTRUSION AREAS ................................................................................... 12 VIEWING THE STATUS OF THE INTRUSION ZONES .................................................................................. 13 VIEWING THE STATUS OF THE ZONES 13 Settings 14 SYSTEM NAME / DEVICE ID / DEVICE PASSWORD ................................................................................... 14 INACTIVITY TIMEOUT 14 STREAMING BITRATE 14 ENABLE DISCONNECTION NOTIFICATION ................................................................................................ 14 RINGTONE 14 IP ADDRESS / DOOR / REMOTE PARAMETERS 14 Con guring Bridge Art. 20003101 and 20090334 15 Utilizzo Bridge domotico Art. 20003101 15 H.A. BRIDGE SETTINGS 15 INFO 15 For local connection: ......................................................................................................... 15 For remote connection: 15 CLIMA 16 OTHER / LIGHTS / IRRIGATION / AUTOMATIONS ...................................................................................... 17 SHUTTER 18 CONSUMPTION 19 SCENARIOS 19 Using home automation Bridge Art. 2
3 0090334 20 This document may not be re
0090334 20 This document may not be reproduced, even in part, without the express written consent of Comelit Group spa. The brands and commercial names appearing in this publication remain the property of their respective owners. 2 4 13425 6 7 8 9 10 Installing the Vedo AppSystem requirements: IOS version 6.0 or later, anti-intrusion control panels in the Vedo range connect to your router to connect locally; activate the data connection for your From the list of installed applications, press the app: before it can be used, the application VEDO: device not connected VEDO: device connected VEDO: no connection2. Function keys. Default configuration: Stop alarms Reset alarms Total activation system (mobile devices are only visible when System status (activated/deactivated/partially 4 New system con guration For the data to be entered during configuration and setup, contact your regular installer. 1. Press "Settings" . 2. Select one of the configured systems or press to create a new system configuration. 3. Enter the name you wish to assign to the system next to the "System name" field. 4. Press "Device ID" and enter the App identification number provided by
4 your installer (between 1 and 8). 5. Pr
your installer (between 1 and 8). 5. Press to return to settings 6. Enter the device password (default = 0). 7. Proceed with the configurations for local and/or remote connection. 1. In " Settings " select the system you wish to configure. 2. Scroll down the screen until you reach the "LOCAL PARAMETERS" section 3. Enter the IP address for the control panel card (default=192.168.1.230). 4. Leave the "Port" setting unchanged (default = 10012) unless advised otherwise by your installer. 5. Scroll all the way through the screen and press "Save" . 1. In " Settings " select the system you wish to configure. 2. Scroll down the screen until you reach the "REMOTE PARAMETERS" section 3. Press "Remote control parameters" to access the relative configurations. 4. Enter the "IP address/Hostname" (registered for the control panel or serial bridge) provided by your installer. 5. Do not change the remaining connection parameters (unless advised otherwise by your installer). 6. Activate the "Secure Web" option to use a secure connection when connecting to the control panel remotely. 7. Scroll all the way through the screen and press "Save" . For remote connection For local connec
5 tion Once configuration is complete the
tion Once configuration is complete the status icon will turn green to show that the application is configured correctly. Once configuration is complete, the status icon will turn green to show that the application is configured correctly. If the Vedo App does not register, contact your installer. 5 1. Click on the system you wish to delete and drag it to the left. 2. Click "Delete". CONNECTING TO A SYSTEM DELETING A SYSTEM CONFIGURATION 1. Press "Settings" . 2. Select one of the previously configured systems by pressing "Connect" 6 Using the Vedo App RECEIVING AN ALARM NOTIFICATION When an alarm notification is received, you will hear the selected ringtone and an alert window will open.* When an alarm notification is received, you will hear the selected ringtone and an alert window will open.* In the event of a zone alarm with dedicated camera Press to enable the connected camera. Press to switch off the camera. Press to cycle through several cameras (where applicable). Press to capture a screenshot Press to start recording a video 1. Press "Show" to view the 4 snapshots captured by the camera installed in the zone in which the alarm has been trigg
6 ered. 2. Wait for images to download (th
ered. 2. Wait for images to download (they will be saved automatically in the Media/Alarms folder, see page 9). 3. Scroll through the images by moving your finger to the right or to the left. If the application is running in the background, an alert window will appear on the display. If the application is running in the background, an alert window will appear on the display. Press the alert to access the application. Press the alert to access the application. If the application is not running or if there is no internet connection, then alerts for any events that occur will only be received once the app is relaunched or the internet connection is restored » The icon will turn blue Press to stop recording the video 7 ANSWERING A CALL When a call is received from another mobile device with the Vedo app, you will hear the selected ringtone. If the application is running in the background, an alert window will appear on the display. Press to enable the audio. Press to stop the call. Press the alert to accept the call. *To receive notifications you need to: • enable receiving notifications in the "Settings" / Notification center. Different ringtones
7 will sound for different types of notif
will sound for different types of notification: in the event of an alarm or sabotage, a "siren" type ringtone will be played, while for other notifications the ringtone selected in the settings menu will be used. • enable the individual Vedo app for receiving notifications and set the desired reception mode. Missed calls can be saved in the notification center 8 VIEWING AND CAPTURING IMAGES/VIDEOS FROM A CAMERA OR CALLING AN APP From the "HOME" screen press to acquire the video signal for the relevant camera. Press to switch off the camera. From the "HOME" screen press to call a user connected to the system via the app. Press to stop the call. Press to cycle through several cameras (where applicable). Press to capture a screenshot Press to start recording a video » The icon will turn blue Press to stop recording the video 9 VIEW/SHARE OR DELETE RECORDED VIDEOS OR SNAPSHOTS VIEW/SHARE OR DELETE RECORDED VIDEOS OR SNAPSHOTS 1. From "HOME" press "Media" to access the folders in which videos and screenshots are saved. 2a. Press " Alarms " if you want to view screenshots captured automatically during an alarm event. 2b. Press " Videos "
8 if you want to view video recordings ma
if you want to view video recordings made while viewing images from the camera (see pages 6,8). 2c. Press " Snapshot " to view snapshots captured while viewing images from the camera (see pages 6,8). 3. Select the desired screenshot or video from the list. Select the video/screenshot you wish to view from the list. Press "End" to return to the previous screen. Press to share. Use the specific control buttons to play the video. or or You can delete videos/screenshots from the "Photos" folder on your device. View/share videos/screenshots Delete videos/screenshots FUNCTION KEYSPress and hold the function key to view the status of VIEWING THE STATUS OF THE SYSTEM AREAS From the "HOME" screen press the system status to Press "Close" to return to the HOME screen. AREA STATUSES Alarm Deactivated Total Alarm Activation Partial Activation (P1 / P2 / P1+P2 ) In Alarm / Alarm MemoryIf the function key is con gured as “Activate Output”, “Toggle Output” or “Deactivate Output”: 11 NO FUNCTION ALARM Allows you to assign the generation of one of the alarms listed below to the function key: 24 H Flood Burglary Gas Fire Medical Emergency Panic Robb
9 ery ACTIVATE OUTPUT Allows you to assign
ery ACTIVATE OUTPUT Allows you to assign the activation of one of the programmed outputs to the function key. TOGGLE OUTPUT Allows you to assign the function key to toggle (change the status of) the selected output. COMMAND Authorise installer: authorises the installer code. Has the same effect as authorising the installer code from the keypad via the user menu. Reset alarms: resets the control panel conditions and alarms in progress, but not the events that triggered the alarms which, if still active, will trigger a new alarm cycle. After this command, the control panel assumes the same status as it would assume following an activation. Reset telephone calls: blocks all phone calls, on landline and GSM network. Also blocks any messages envisaged but not sent (SMS, email). Request assistance: allows you to send a request for assistance to one or more recipients, by means of a phone call. (NIY) Stop alarms: stops the alarms in progress, regardless of whether the events that triggered them are still active. Does not stop alarms with the attribute Silent. Overtime: this command allows you to delay an automatic activation by n hours, where n is programmable, for the purpose of a
10 llowing work to continue beyond the env
llowing work to continue beyond the envisaged activation time. Event 1 key: activates the event programmed by the installer. Event 2 key: activates the event programmed by the installer. DEACTIVATE OUTPUT Allows you to assign the function key to deactivate the programmed output. ACTIVATION SCENARIO Allows you to assign to the function key one of the possible activation/deactivation programmes: Total Activation of the alarm across the entire system. Total Deactivation of the alarm across the entire system. Scenario n (with n between 1 and 16). * Functions programmed by default * * * * 12 VIEWING AND CONTROLLING INTRUSION AREAS Press to access the screen "Intrusion areas". KITCHEN 1 2A 2 The Intrusion areas section can be used to activate, deactivate and view the status of the alarm system areas. This chapter illustrates how the “alarm” section works for VEDO series control panels. (1) Alarm system status icon System Deactivated Alarm deactivated System Activated Alarm activated across the entire system Partial Activation Alarm partially activated: only some of the areas and/ or partial sets are activated Alarm Memory Alarm in memory alert Alarm in progress
11 Alarm in progress In sabotage System in
Alarm in progress In sabotage System in sabotage (1A) Alarm control buttons governing the entire system Allarme Connesso Area 1 Area 2 Impianto Disinserito Zone Zone 1A12A2 Deactivates alarms activated across the entire system Allarme Connesso Area 1Disinserita Area 2 Impianto Disinserito Zone Zone 1A12A2 Activates alarms across the entire system Allarme Connesso Area 1 Area 2 Impianto Disinserito P1 Zone Zone 1A12A2 Activates partial 1 across the entire system (and deactivates partial 2 if active) Allarme Connesso Area 1Disinserita Area 2 Impianto Disinserito P1 P2 Zone Zone 1A12A2 Activates partial 2 across the entire system (and deactivates partial 1 if active) Allarme Connesso Area 1Disinserita Area 2 Impianto Disinserito P1P2 P1+P2 Zone Zone 1A12A2 Activates partial sets 1 and 2 across the entire system (2) Alarm zone status bar Deactivated Zone alarm deactivated Area 1Total Act. Zone alarm activated Area 1 Partial zone alarm activated Area 1In sabotage Area in sabotage Area 1Alarm memory Zone alarm in memory alert Area 1Alarm in progress Alarm in progress (2A) Alarm control buttons governing an area Allarme Connesso Area 1 Area 2 Impianto Disinserito Zone Zone 1A12A2 area A
12 llarme Connesso Area 1Disinserita Area 2
llarme Connesso Area 1Disinserita Area 2 Impianto Disinserito Zone Zone 1A12A2 Activates alarms in a speci�c area Indicates that the alarms are active Zone Indicates that the system is not ready for activation, and that forcing is required 13 VIEWING THE STATUS OF THE INTRUSION ZONES VIEWING THE STATUS OF THE ZONES (2A) Alarm control buttons governing an area Allarme Connesso Area 1 Area 2 Impianto Disinserito Zone P1 Zone 1A12A2 Activates partial 1 (and deactivates partial 2 if active) P1 Indicates that the partial set is active P1 Zone Indicates that the system is not ready for activation, and that forcing is required Allarme Connesso Area 1Disinserita Area 2 Impianto Disinserito Zone P1 P2 Zone 1A12A2 Activates partial 2 (and deactivates partial 1 if active) P2 Indicates that the partial set is active P1 P2 Zone Indicates that the system is not ready for activation, and that forcing is required Allarme Connesso Area 1Disinserita Area 2 Impianto Disinserito Zone P1P2 P1+P2 Zone 1A12A2 Activates partial sets 1 and 2 P1+P2 Indicates that the partial sets are active P1P2 P1+P2 Zone Indicates that the system is not ready for activation, and that forcing is requ
13 ired Press Area 1 to view the statu
ired Press Area 1 to view the status of the zones in an area. Press an option on the list (e.g. "DOOR") to "exclude" or "isolate" the zone. Use Allarme Connesso Aperte• Porta ingresso Allarme Connesso Aperte• Porta ingresso zone status legend Zone open Zone faulty Zone isolated Zone excluded Zone in standby Zone anomaly Zone in sabotage Press to view the status of the zones across the entire system. Use Allarme Connesso Aperte• Porta ingresso Allarme Connesso Aperte• Porta ingresso 14 1. In " Settings " select the system you wish to configure. 2. Press "Inactivity timeout" and select the desired setting. 3. Press to return to settings. 4. Scroll all the way through the screen and press "Save". Settings SYSTEM NAME / DEVICE ID / DEVICE PASSWORD INACTIVITY TIMEOUT STREAMING BITRATE For the data to be entered during configuration and setup, contact your regular installer. See page 4. This function can be used to change the device inactivity time which elapses before automatic logout occurs. 1. In " Settings " select the system you wish to configure. 2. Set the video streaming transmission speed in Kbps (Streaming Bitrate). 3. Scroll all the way thr
14 ough the screen and press "Save". This f
ough the screen and press "Save". This function can be used to adjust video streaming quality in remote connection mode via the bitrate (Kilobits transmitted per second). 1. In " Settings " select the system you wish to configure. 2. Activate the "Connection error notification" option 3. Scroll all the way through the screen and press "Save". ENABLE DISCONNECTION NOTIFICATION This function can be used to activate notifications following disconnection from the control panel. RINGTONE 1. In " Settings " select the system you wish to configure. 2. Scroll down the screen until you reach "AUDIO PARAMETERS" and press the "ringtone" box to open the window with the list of available ringtones. 3. Select a new ringtone to change the call melody. 4. Press to return to settings. 5. Scroll all the way through the screen and press "Save". IP ADDRESS / DOOR / REMOTE PARAMETERS See page 4. 15 H.A. BRIDGE SETTINGS INFO See page 15. The "version" field shows the version currently in use. Con guring Bridge Art. 20003101 and 20090334 In systems with the facility for home automation, the home automation system can be monitored and controlled via the App if Bridge Art. 20003101 or Bridge A
15 rt. 20030334 is fitted. For the data to
rt. 20030334 is fitted. For the data to be entered during configuration and setup, contact your regular installer. 1. In " Settings " select the system you wish to configure. 2. Scroll down the screen until you reach "H.A. BRIDGE SETTINGS". 3. Set the User Password for the Home Automation Bridge. default for Art. 20003101 = 111111 default for Art. 20090334 = 1234 1. Enter the IP address for the home automation bridge (default = 192.168.1.252). 2. Set the communication port "Local H.A. Bridge web port" (default = 80). 1. Enter the "Remote IP address/Hostname" supplied by your installer. 2. Set the communication port "Remote Bridge web port" (default = 443 for secure web). 3. Enable the option "Secure Web" to use a secure connection when connecting to the web pages for the home automation bridge. For local connection: For remote connection: Utilizzo Bridge domotico Art. 20003101 Tuinbereg. VerbruikScenario’sInstellingen Zones inbraakStatus zonesDeelzones inbraak Se il bridge Art.20003101 è correttamente configurato, sarà possibile visualizzare le pagine web del bridge. Premere "Altro" per visualizzare il menu delle pagine web del Bridge Domotico. CLIMAThe climate sec
16 tion can be used to monitor and adjust r
tion can be used to monitor and adjust room temperatures. Press Other and Climate to access the Climate Press the desired room (for example: BATHROOM)1. Room temperature.2. Boiler / air-conditioner on indicator.3. Room displayed.4. Automatic mode.5. Manual mode.6. Timed custom mode forcing.7. Room temperature adjustment cursor.8. Desired temperature.9. System on / off.10. Summer / winter mode selection / cooling management). Press ON (system on) to change the status to OFF (system off) and vice-versa. Press summer mode to switch to winter mode and vice-versa. Press the M icon to set the climate to manual mode and use the + and – selectors (or the adjustment cursor) to adjust the temperature of the room. »The icon will turn blue. »The icon will turn blue. Press A to set the climate to automatic mode and use the programming set on the master supervisor. indicates that a timed custom mode has indicates that a timed custom mode has been activated from the master supervisor for that BATHROOM 24.6°C A 21.2°C-+24.6°C LIVING ROOM BEDROOM M ON 3 4 10 9 5 621 87 OTHER / LIGHTS / IRRIGATION / AUTOMATIONS DAY ZONE OFFON NIGHT ZONE OFFON GARDEN OFFON ENTRANCE LED OF
17 FON SITTING ROOM OFFON ENTRANCE LED OFFO
FON SITTING ROOM OFFON ENTRANCE LED OFFON DAY ZONE SITTING ROOM LED OFFON T Light The Other / Lights / Irrigation / Automations section can be used to control the respective elements. / / / to access the relevant sections and control the zones using the Element statusall elements off Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON T T Automazioni Connesso 2-7 tapp OFFON 36-5 tapp OFFON 36-5 tapp OFFON some elements in Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON all elements in the Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON single element Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON T T Automazioni Connesso 2-7 tapp OFFON 36-5 tapp OFFON 36-5 tapp OFFON irrigation legend Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON i
18 rrigation Irrigazione Connesso FONTANA O
rrigation Irrigazione Connesso FONTANA OFFON GIARDINO OFFON GIARDINO OFFON T Ttimed irrigation Press / control the individual elements using the ON / OFF OFF In the case of RGB lights, the colour and light intensity 1 2 3 4 SHUTTER DAY ZONE NIGHT ZONE SHUTTER DAY ZONE element off Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON T T Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON Luci Connesso LED INGRESSO OFFON SALOTTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON T Luci Connesso LED INGRESSO OFFON SALOTTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON Tsingle element active Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON T T Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON Luci Connesso LED INGRESSO OFFON SALOTTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON T Luci Connesso LED INGRESSO OFFON SALOTTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON T lights legend Luci Connesso ZONA GIORNO OFFON ZONA NOTTE OFFON GIARDINO OFFON lights Luci Connesso LED INGRESSO OFFON SALO
19 TTO OFFON LED INGRESSO OFFON ZONA GIORN
TTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON T RGB lights Luci Connesso LED INGRESSO OFFON SALOTTO OFFON LED INGRESSO OFFON ZONA GIORNO LED SALOTTO OFFON Ttimed light other outputs legend Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON other Altro ZONA GIORNO OFFON ZONA GIORNO OFFON ZONA GIORNO OFFON T The blue bar indicates that the shutters in the controlled zone The blue bar indicates that the shutter in the controlled zone is The blue arrow indicates whether the shutter is opening to lower the shutters in the controlled room; press to stop the downward movement. Or Press to raise the shutters in the controlled room; press to stop the upward movement.1. Press Other and Shutters to access the shutters 2. Press a specific room (for example: DAY ZONE) and control the individual elements using . Press to lower the shutter; press to stop the downward movement. Or Press to raise the shutters in the controlled room; press to stop the upward movement. SALON SALON The Shutters section can be used to control the opening and closing of one shutter, or of all the shutters in a room. CONSUMPTIONSCENARIOS LOADS 3 4 6 7 8 1 5 Gra ekTabel Start
20 TourRelax TV Scenarios Áreas de intrus
TourRelax TV Scenarios Áreas de intrusiónZonas de intrusiónEstado zonas Áreas de intrusiónZonas de intrusiónEstado zonas Zones inbraakStatus zonesDeelzones inbraak For example, to change the display from “graph” to “table”, click the “graph” drop-down menu If you set the maximum consumption thresholds, the In "table" mode: the checkboxes are coloured to This menu can be used for monitoring consumption though graphs and tables. Consumi Connesso 15/04/2014 Giorno Tabella € Période 0-10.001 1-2475.0 2-3596.0 3-40.001 4-50.001 5-60.001 6-70.001 7-80.044 8-90.088 9-100.089 10-110 11-120 12-130 13-140 14-150 15-160 16-170 17-180 18-190 19-200 20-210 21-220 22-230 ARICHI The Scenarios section can be used to activate programmed scenarios.Press Other and Scenarios to access the Scenarios Relax TV the blue bar indicates that the www.comelitgroup.comcod. 2G40001361 Using home automation Bridge Art. 20090334 If bridge Art. 20090334 is configured correctly: you automation bridge, while you will no longer be able "Intrusion zones" screen. Press Zone status H.A. Bridge Intrusion zone Connected Mon Jan 01 to view the web pages for the home automation brid