OmegaPS 0007 Outline OmegaPS R181 Release Summary of Changes from MILSTD13882B SAE and Rev C 8272012 2 Supportability Standards Graham Brum OmegaPS R181 Release R181 is the first ID: 416642
Download Presentation The PPT/PDF document "GEIA-STD-0007 Rev B" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
GEIA-STD-0007 Rev B
OmegaPS
0007Slide2
Outline
OmegaPS
R18.1
ReleaseSummary of Changes from MIL-STD-1388-2BSAE and Rev C
8/27/2012
2
Supportability Standards - Graham BrumSlide3
OmegaPS R18.1 Release
R18.1 is the first
OmegaPS
release to include a GEIA-STD-0007 applicationThe list of applications now includesDEF-STAN 00-60 – Issue 0 to Issue 4
MIL-STD 1388-2BDEF AUST 5692 – Issue 1 and Issue 2GEIA-0007 – Rev B
Access to each Application is controlled by a key code and then by Team/Application access control
8/27/2012
3
Supportability Standards - Graham Brum
Login is through a separate URL.
GUI is as per other core Applications.Slide4
GEIA-STD-0007 Differences
The large majority of the 0007 application is drawn directly from the MIL-STD-1388 application
However – key differences make it impossible to move between the two applications seamlessly – data sets can be moved from 1388 to 0007 but not the reverse
8/27/2012
4Slide5
GEIA-STD-0007 Differences
ALC –
ALCs
are AlphanumericThis improves flexibility and allows for an auditable record of changes required through extended in-service management
8/27/2012
5Slide6
GEIA-STD-0007 Differences
Enables capture of Digital Files
Enables data storage for
IETMs or direct publications – Illustrated Parts CFTO is using this capability in DND configuration
All data types supported thus could store video as requiredCompletely enables Initial Provisioning process in DND by storing SPTD for IP Conferences
8/27/2012
6
Links appear here when a file has been associated with a Project.
LCN and Provisioning Links are enabled currently for DND configuration of
OmegaPS
.
Add Document adds an item to the Library, Drop Document removes it, Show Document opens the file Slide7
GEIA-STD-0007 Differences
Enables three tiered maintenance definition – procedure/task/subtask
Enables good map to SAP and excellent flexibility for creating maintenance documentation
7
Task
Sub-Task
Procedure
Task
Sub-Task
MIL-STD-1388
GEIA-STD-0007Slide8
GEIA-STD-0007 Differences
Enables all task resources at the Subtask level
This capability was introduced to Omega as an optional setting for the 1388 application several years ago and is consistent with DEF STAN 0060
It allows for work scheduling and better mapping to S1000D
8/27/2012
8
Resources – Personnel, Support Equipment, Provisioned Items, ManualsSlide9
GEIA-STD-0007 Differences
All
Narratines
have been increased to unlimited lengthThe restrictions imposed by 1388 have all been removedNarratives now exist for:
8/27/2012
9
Skills
Test Equipment
Support Equipment Recommendation Data Revision Remarks
Facilities
Provisioning Remark
Parts Manual Provisioning Nomenclature
Personnel Requirement
System Re-Design
Logistics Considerations
RAM Characteristics
Failure Mode Mission Phase Characteristics
FMEA Narrative
System/End Item Narrative
Additional Requirements
Unit Under Test Explanation
Electrical Ground
Transported End Item
TransportationSlide10
GEIA-STD-0007 Differences
Additional Reliability requirements
Required Mean Time
Between Effective (or Essential) Functional Failure Loss of mission essential functionRequired Mean Time Between
Non-Effective (or Non-Essential) Functional FailureLoss of non-mission essential function
Required Mean Time Between System Aborts
8/27/2012
10Slide11
GEIA-STD-0007 Differences
Additional Sub-Task Work Area Code
Work Area Code Access
Access Code identifying points of access for maintenance – equates to S1000D AccessWork Area Code Zone Code identifying where the work will occur – equates to S1000D Zone
8/27/2012
11Slide12
GEIA-STD-0007 Differences
Sub-Task Objective States
List of conditions required to complete a subtask
List is drawn from S1000D
8/27/2012
12Slide13
GEIA-STD-0007 Differences
Circuit Breaker Identification and State
Groups and States required to complete a sub-task
List is drawn from S1000D
8/27/2012
13Slide14
GEIA-STD-0007 Differences
Scheduled Maintenance Events
Defines dependencies for maintenance tasks
In compliance with S1000D
8/27/2012
14
Trigger may be a condition or another taskSlide15
GEIA-STD-0007 Differences
Scheduled Maintenance Sampling
Defines when a task is to be completed on only a portion of the fielded items
In compliance with S1000D
8/27/2012
15Slide16
GEIA-STD-0007 Differences
Additional
NSNs
Allows for the identification of additional applicable NSN This requirement was a result of experience gained from CGCS and DRMIS
8/27/2012
16
When the original HA Reference is a specification rather than a MPN then actual MPNs can be added here associated with the applicable NSNSlide17
SAE and Rev C
The Society of Automotive Engineers absorbed
TechAmerica
in the June of 2013Therefore the LCLS committee responsible for GEIA-STD-0007 is now an SAE committee with the Aerospace and Defence GroupSAE committees rules do not require SAE membership in order to be a voting member
SAE wants a well balanced voting group
8/27/2012
17Slide18
SAE and Rev C
Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Remove the LCN – no inherent value added – only impediment would be any legacy requirement within the DoD data/solution map
Replace the Task Code with a non intelligent identifier and explicitly store all hidden attributes – adjust any DoD required reports. This will also give us an opportunity to identify any changes required to these Task identification attributes
8/27/2012
18Slide19
SAE and Rev C
Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Add all data that only exists in LSA Report to be held in the database – any sums, calculations, etc. This will have the impact of moving us away from the reports and allow us to provide data.Identify any S2000M data elements that should be added to Material identification
8/27/2012
19Slide20
SAE and Rev C
Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Identify any S3000L data elements that should be added – probably As Design/As Delivered with Configuration Management and Serialization comes in with this – to me the cut off is As Designed then As Delivered allowing us to ID serial numbers delivered by Part #/Assembly
Identify any S5000F data elements that should be added
8/27/2012
20Slide21
SAE and Rev C
Rev C is being planned for 2015
Items Pennant has submitted for consideration for Rev C are as follows
Identify standard interface requirements to receive data from Engineering systems and provide data to Maintenance Management Systems/Material Management Systems
8/27/2012
21Slide22
8/27/2012
22
Questions?