PDF-Mounting Hole

Author : luanne-stotts | Published Date : 2015-11-17

Keyway286

Presentation Embed Code

Download Presentation

Download Presentation The PPT/PDF document "Mounting Hole" is the property of its rightful owner. Permission is granted to download and print the materials on this website for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.

Mounting Hole: Transcript

Keyway286. CODELAMP [W]WEIGHT [kg]VOLTAGEFREQUENCYAMBIENT TEMPERATUREFLLED30CA0105.1136139516.50110/230V50/60HZLLED30PA0105.1126139517.00110/230V50/60HZLED FL.. Floodlights - Emergency version / 3 hours ba Mounting Hardware Two mounting brackets are available:The low-profile bracket (AIR-AP-BRACKET-1), which provides a tight fit between the access point and the ceiling but does not accommodate network 5 HOLE 15 HOLE 10 HOLE [ZIP] 4” ZIP TIE [A20] CHASSIS BUMPER ANGLE, 20-HOLES LONG[R16] CHASSIS RAIL, 16-HOLES LONG[C20] C-CHANNEL, (1X2X1) 20-HOLES LONG[C15] C-CHANNEL, (1X2X1) 15-HOLES LONG[B20] Quick Installation Guide. 00825-0200-4809 rev. DB – 485. 00825-0100-4585 rev. AA – 585. Mark the Locations for Drilling the Mounting Holes. Mark the location for the first hole. Use a pipe tape to find and mark the location of the opposite side hole. Quick Installation Guide. 00825-0200-4809 rev. DB – 485. 00825-0100-4585 rev. AA – 585. Mark the Locations for Drilling the Mounting Holes. Mark the location for the first hole. Use a pipe tape to find and mark the location of the opposite side hole. Quick Installation Guide. 00825-0200-4809 rev. DB – 485. 00825-0100-4585 rev. AA – 585. Mark the Locations for Drilling the Mounting Holes. Mark the location for the first hole. Use a pipe tape to find and mark the location of the opposite side hole. Screw And Surface. Counterbore. Countersink. Threaded hole. Clearance Hole. 1.1 1.21.31.42.12.23.*4.5. 6. *7. * 9.*10.11. Silicone cord*12. Mounting tool for springs 1.3*1.11.22.1.1.31.42.2.3. 4.7.5.6.10.9.11.12 2MOD-KOZE-50 - mounting instructionswww.KlusDesign.eu Slide the E Feed the power cable and attach the mounting strip B to the surface withFeed the power cable Mount the LED strip F and insert the cover C and end cap D2 Connect power and assemble the extrusion A 2wwwKlusDesigncomNISA-PLA mounting instructionsCover CEnd cap DLED strip FSilicone cord EExtrusion AMounting strip BParts needed to mount the NISA-PLA extrusionTools needed for mounting- drill- scr ToTO12-6-991Mark CTC Center to Center - see chart at right dimension of towel bar on wall at desired mounting position2Position center of mounting bracket over marks made in Step 1 a Provide strongsupportRecessedoutlet boxCeilingmountingOutlet boxFig 3Fig 4Outlet boxMAXIMUM 20 ANGLE5Fig 9Fig 10Registration slotCanopyCanopy coverStep 8 Slip the coupling cover canopy cover and canop Installation guide for the Vino Series Flex VP-Flex productsIncluded1491 Vino Pins Flex Neck Mounting Strip1491 Vino Pins Flex Base Mounting Strip1496 Mounting Hole Caps1492 Plastic Couplers1494 Spira Approximate DimensionsFigure 24 - E300/E200 Overload Relay with 193-ESM-___-30A-P, -60A-P, or -30A-CT Sensing Module, DIN Rail Mounted 102(4.00) 106.3(4.18) 123.5(4.86) 21.5(0.85) 11.35(0.45) 30.2(1.1

Download Document

Here is the link to download the presentation.
"Mounting Hole"The content belongs to its owner. You may download and print it for personal use, without modification, and keep all copyright notices. By downloading, you agree to these terms.