Your Project: Create one HUMP mold platter, bowl or plate with feet and - PowerPoint Presentation

Slide1

Your Project:

Create one HUMP mold platter, bowl or plate with feet and

handle(s)

(slab or

coils/designs

draped over)

Create one SLUMP mold platter, bowl or plate with feet and

handle(s)

(slab or

coils/designs

pressed into)

Mold projects can have the same theme (series), or different themes.

Must include an interesting

texture or design/pattern

through addition or subtraction of clay that enhances the overall design

Size: Nothing bigger than a pottery wheel bat

If you finish early, you can choose to create lids, or possibly another molded piece of your choosing (same size requirements)

(You will be glazing these molds with dinnerware-safe glazes)Slide2
Slide3

Small slab hearts layered and pressed into a bowl to create a slump mold

Large slab pressed into or onto a form (edges cut away)

Coils/slab strips pressed into/onto a form

    

Slide4

This would have been made as a

HUMP

mold. You can tell because all the additive pieces are on the outside.

  

This is a platter

(shallow compared to a bowl)Slide5

Check out those handles!Slide6
Slide7

Which do you like?

Clean and modern or ornate and detailed? Slide8

Texture & Designs/PatternsSlide9

FeetSlide10

Finishing:

You

will be glazing these platters/bowls with dinnerware safe glazes

(so you can actually use them for food!)Slide11

Slump/Hump Molds

Square Platter Slump Mold

(1:37)

Square platter hump mold

(1:26

)

Adding feet to your mold

(1:31)Finishing your mold (1:18)

paper plate slump mold (4:57)Slide12

HOMEWORK

Due tomorrow:

5 idea sketches

2 different objects to mold from