PPT-Oxyfuel
Author : pamella-moone | Published Date : 2017-07-17
cutting NCCER Welding Unit 2 intro is a process that uses the flame and oxygen from a cutting torch to cut ferrous metals is produced by mixing a fuel gas with
Presentation Embed Code
Download Presentation
Download Presentation The PPT/PDF document "Oxyfuel" is the property of its rightful owner. Permission is granted to download and print the materials on this website for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Oxyfuel: Transcript
cutting NCCER Welding Unit 2 intro is a process that uses the flame and oxygen from a cutting torch to cut ferrous metals is produced by mixing a fuel gas with pure oxygen . Contact. : . Dipl.-Ing. Dr. Tobias Pröll. tobias.proell@tuwien.ac.at. Working Group Zero Emission Technologies. Content. Working Group Zero Emission Technologies. Research Topics. Project Group Chemical Looping Technologies . Carbon Capture & Storage (CCS). The Basics 101. Challenges. Reduction of capital costs. Current process will actually raise electricity costs. Reduction of uncertainties related to long-term, large-scale storage. Gratiot-Isabella Technical Education Center. Serving Gratiot & Isabella County School . Districts. Business Offerings. Accounting. Business Management. Digital Media/Web Productions. Marketing. Family & Consumer. objectives. When we have completed this chapter, you will be able to:. Identify oxyfuel equipment. set up and operate oxyfuel equipment. Light and adjust an oxyfuel torch. Shut down oxyfuel cutting equipment.
Download Document
Here is the link to download the presentation.
"Oxyfuel"The content belongs to its owner. You may download and print it for personal use, without modification, and keep all copyright notices. By downloading, you agree to these terms.
Related Documents
