Nominal weights and dimensions REV ISO DNV Certifica - PDF document

Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Galvotec’s Mil-Spec zinc anode meet the latest Mil-Spec revision. This alloy is also coveredby ASTM-418-95 Type I. Galvotec’s Mil-Spec zinc anodes are effective, economical corro-sion fighters in applications where temperature exposures are limited up to 120 degrees F.(50° C) Galvotec’s Mil-Spec zinc typical uses in seawater or saline mud:Hulls of ships, barges, boats and tugsBallast tanks of tankers, ore carriers and freightersBulkheadsPiers and PilingsPipelinesHeat ExchangersGalvotec Alloys, Inc. is an approved manufacturer for the US Government in addition to allGalvanic Efficiency:Galvotec’s Mil-Spec anodes operate at a nominal 95% efficiency in seawater.Galvanic efficiency relates directly to the anode’s service life. Some commercial anodesthe current flow. In some cases, the anode’s productive life ends before all of the availableGalvotec’s Mil-Spec anodes, however, resist the formation of hard, dense corrosion prod-ucts and continue producing protective current until they are completely consumed. Thislonger life means fewer replacements and reduced overall operating costs.ASTM-B-418 TYPE IASTM-B-418 TYPE IIFe0.005% Max.Fe0.0014% Max.Pb0.006% Max.Pb0.003% Max.Cu0.005% Max.Cu0.002% Max.AI0.1 - 0.5%AI0.005% Max.Cd0.025 - 0.07%Cd0.003% Max.ZnRemainderZnRemainder Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM ZincHull AnodesGA-26Contains single galvanized steellongitudinal strap. Can be bolted orwelded to hull. Particularly suited forsmaller ships, coastal vessels, harbortugs, etc. DO NOT PAINT 24" 2-1/4 " 4-1/2 " 1-1/2" 29"Contains single longitudinalgalvanized steel strap forwelding to hull. Particularlysuited for major ships, 10,000DWT and upward. Tapered GA-23TContains two cast-in galvanizedsteel mounting straps. DO NOT PAINTGA - 23T 6-1/2 " 6" 1-1/4" 6-1/2" 10" 14" DO NOT PAINT 4-1/2 " 1-1/2" 2-1/4" Weight26 lbs11.8 kgWidth4"114 mmHeight2"57 mmLength14”356 mm Current Rating1 (amp-yrs) Weight48 lbs21.8 kgWidth4"114 mmHeight2"57 mmLength24”61 mm Current Rating2 (amp-yrs) Weight22.5 lbs10.2 kgWidth6"165 mmHeight1"32 mmLength14”356 mm Current Rating1 (amp-yrs) Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Military AnodesAnodes in this series contain two cast-ingalvanized steel mounting straps (brassmounting straps are also available) or two A teardrop-shaped anode containing asingle, cast-in galvanized steel strap. DO NOT PAINTGA - 12 16" 1-1/4" These anodes contain a single cast-in DO NOT PAINTGA - 23 1-1/4" 6"12" 2" 6" 3" 10" 6"1-1/4" Current Mil.Wt.WHLRating NumberSpec.LbsKginmminmminmm(amp-yrs)ZHS-232210615213212301ZHC-232210615213212301ZHS-474219615226412301 ZHC-474018615226412301 Mil.Wt.WHLRating NumberSpec.LbsKginmminmminmm(amp-yrs)1153761312300.5 ZSS-2422103762612301.0 Mil.Wt.WHLRating NumberSpec.LbsKginmminmminmm(amp-yrs) 52.33761329410.25 Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM ProductCurrent NumberWt.WHLaCRating LbsKginmminmminmminmm2712.31.4361.4364812192461015022.72512514812192461026027.2251251601524369142.257031.8264264481219246102.5 10045.4264264601524369144 Clamp-onBolt-on LaC AA-A HH Ballast Tank AnodesGA-TZ Weld-on SeriesContains bent galvanized steel core rod on sizes up to50 lbs. for direct welding to structure. Anodes over 50 The core consists of two galvanized steel flat barswelded to a mild steel rod. Anodes can be clamped,welded or bolted to ballast tank structure. ProductCurrent NumberWt.WHLaLCRating LbsKginmminmminmminmm(amp-yrs)2712.31.4361.43648121960152415022.725125148121960152416027.22512516015247218292.257031.82642644812196015242.5 10045.42642646015247218294 ProductCurrent NumberWt.WHLaLCRating LbsKginmminmminmminmm(amp-yrs)GA-TZW-272712.31.4361.4344812196917531GA-TZW-505022.72512514812196917532GA-TZW-606027.22512516015248120572.25GA-TZW-707031.82642644812196917532.5 GA-TZW-10010045.42642646015248120574Hardware Sold SeparatelyHardware Sold Separately Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Several different steel cores are available in thisType “E”Type “P”" standard pipe in anodes weighingType “R” Solid hull anodes are available withoutcast-in mounting straps.GA-ZEP SeriesThese circular anodes conform to the latestmodification of MIL-A-18001 and are availablewith either of the following core configurations:Custom Line For special requirements, Mil-Spec anodes forballast tanks, piers and pilings can be furnishedwith a wide variety of cores and to the range ofdimensions shown in the accompanying table: Type “A” –oneType “B” –twoType “C” –two GA-11Core Typeinmm25137641025127615292291127915381lbskg1.52.931.452.373.2167.32410.9 Style A –Square slab 6” x 6” x 1” –Circular slab –Semi-circular slab 3"L"3" 6"4" 4" 4" H 3/8" or 1/2" IPSGalvanized1" 5" D. 1/8" 1/16" 1/8" ± 1/16" ProductWt.WHLRating NumberLbsKginmminmminmm196.66152125123050.75104.5615213123050.5 104.5615213123050.5 Cross SectionLengthsNom. Wt. inmminmmlbs/inkg/mm1.4 x 1.436 x 366–60153–15240.50.012 x 251 x 516–60153–15241.00.022.5 x 2.564 x 646–60153–15241.50.033 x 376 x 766–60153–15242.30.414 x 4102x 1026–60153–15244.20.085 x 5127 x 1276–48153–12196.50.127 x 7178 x 1786–36223–91412.80.239 x 9229 x 2299–24223–61021.00.389 x 10229 x 2549–24223–61023.40.42 10 x 10254 x 2549–24223–61026.00.46 ProductWt.WHLCoreRating NumberLbsKginmminmminmmType5022.7251251481219E,R210045.4376376441118E,P,R415068.04102410236914E,P,R6250113.49229922912305E,P,R10250113.441024102601524E,P,R10375170.17178717830762E,P,R15 500226.89229922924610E,P,R20" standard pipe. Zinc Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Soil zinc anodes are made from 99.99% pure Special High Grade Zinc. Thisalloy conforms to the composition of ASTM B-418-95 Type II.Galvotec zinc anodes for underground use are produced in a variety of sizes and weights. All of the" galvanized mild steel core. The standard core extends4" out one end. Anode can be supplied bare or packaged with the standard 10’ of #12 copper lead ProductWt.WHLPkg.Diam.L Numberlbkginmminmminmmlbkginmminmm52.31.4361.4369223209512715381125.41.4361.436246104018512730762156.8251251153813616612721533188.21.4361.43636914552551274210673013.61.4361.436601524863951276616763013.62512513076267306127369144520.4251251451143100456127511295 6027.2251251601524120556127661676 Cross SectionLength RangeNominal Wt. inmminmmlb./in.kg/mm3 x 376 x 766 - 60152 - 1522.30.044 x 4102 x 1026 - 60152 - 1524.20.085 x 5127 x 1276 - 48152 - 1226.50.127 x 7178 x 1786 - 36152 - 91412.80.239 x 9229 x 22912 - 24305 - 610210.38 10 x 10254 x 2549 - 24229 - 610260.46 Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM SOLID ZINC PENCIL ANODES* ABC inmm3/810AvailableSpecify1/2”13inThread5/8161” - 6”Size3/419125Lengths PENCIL ANODE BRASS RETAINING PLUGS ABC(NPT Size)* Internal in.cminmminmmThread1/46.31258.625163/8-16 NC3/810.31258.75193/8-16 NC1/213.375101.00253/8-16 NC3/419.375101.25325/8 - 11 NC125.500131.50383/4-10 NC1 1/4323/4” NC1 1/4321” NC1 1/2383/4” NC2513/4” NC*Other Internal Thread Sizes Available ACB} (across flats) L D Custom Sizes Available BA C Type ZRN Size (D x L)Net Weight each in.mm lbkgZR-3/8 x 7210 x 18292.9ZR-1/2 x 3613 x 60161.8ZR-5/8 x 7216 x 182962.7ZR-3/4 x 3619 x 9144.51.4ZR-1 x 3625 x 9147.52.3ZR-1.25 x 3632 x 914123.6ZR-1.5 x 3638 x 91418.755.7ZR-2 x 3651 x 9143310.0ZR-2.5 x 3664 x 9145115.4ZR-3 x 3660.7518.4ZR-3.5 x 3686.2526.1 Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Galvotec has produced all sizes of zinc bracelets ranging from 1deliveries and quality workmanship is due to our competent staff with many years of experienceGalvotec's laboratory is fully equipped with state-of-the-art equipment. All products are tested TaperedSquare End Weld-on ZincBracelet AnodesSemi-Cylindrical for Concrete Coated Pipe Cut Coating Away to AttachBonding Pigtail or Tab Pipe CoatingPigtailGalvotec Bracelet L 2" (Typ.)Type2" (Typ.)Cut Coating Away to AttachBonding Pigtail or TabHMWPE Insulated Pigtail Welded to Core9 Gauge Rod Welded to CoreConcrete Weight Coating Welded to CoreWelded to Core Flat Bar CoreGap Nominal weights and dimensionsREV 02/03 ISO 9001DNV Certification, Inc.REGISTERED FIRM Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM ZincBracelet Anodes Tapered BraceletsBracelet I.D.TYPE *THICKNESSLENGTHGAPNET WT.GROSS WT. inmminmminmminmm lbskglbskg 2 3/860T1 1/432123051252913.23114.1 3 1/289T1 1/432123051253917.74118.6 4 1/2114T1 1/238123051 1/4326228.16429.0 4 1/2114T1 1/23819 1/44891 1/43211954.012255.3 5 9/16141T1 1/23815 5/83971 1/4329543.19844.5 6 5/8168T1 1/23811 1/42861 1/2388337.78739.5 6 5/8168TB21 1/23813 1/23433/4198337.78739.5 6 5/8168T1 1/23813 5/83461 1/2388337.78739.5 6 5/8168T1 1/238184571 1/43215570.315972.1 6 5/8168T1 3/44421 1/45401 1/23819086.219488.0 6 5/8168ST1 3/44421 3/45531 1/23820492.520894.4 7 3/8187TB22 1/4579 1/224112511451.711954.0 8 5/8219T1 1/23811 1/42861 1/23810145.810648.1 8 5/8219T1 1/23814 1/33641 1/23812958.513460.8 8 5/8219T1 1/23819.85031 1/23821296.221798.4 8 5/8219TB12 1/45726 5/8676––21296.221798.4 8 5/8219T2 1/264164061 1/238250113.4254115.2 9 3/8238ST w/sockets1 1/23813 1/234337618383.018784.8 9 1/2241TB22 1/26410 1/226725116876.217077.1 10 3/4273T1 1/23812.732325112958.513661.7 10 3/4273T1 1/23817 3/445125119688.920191.2 10 3/4273T1 3/83518 3/44761 1/23820994.821497.1 10 3/4273T1 3/44422559251304137.8309140.2 10 3/4273ST1 3/44422 1/4565251320145.2326147.9 10 3/4273TB13 1/48324 1/2622––338153.3352159.7 10 3/4273ST1 3/4444010162 1/264586265.8596270.3 12 3/4324T1 1/23814 3/437525119186.620191.2 12 3/4324T1 1/23816 3/44251 1/238269122.0275124.7 12 3/4324ST1 1/23821.25392 1/457307139.3319144.0 12 3/4324T w/sockets1 1/238235844102323146.5329149.2 12 3/4324T25119 5/8498251385174.6398180.5 12 3/4324ST11 3/83531 1/2800251426193.2438198.7 13 9/16345T w/sockets1 1/23814356410217880.718483.5 14356ST1 1/23821.15362 1/457338153.3351159.2 14356ST1 3/44421 3/4553251397180.1411186.4 16406ST1 3/444205082 1/457436197.8451204.6 16406ST11 1/23832813251542245.9557252.7 16406ST251235842 1/264544246.8559253.7 32813T25115 1/239431675016547851731 36914T2 3/47016 7/84293761096241611312493 401016T25115 3/839037660413326311391*T=TaperedTB1=Tapered-Bolt-On (1 half only)TB2=Tapered-Bolt-OnST-Semi-TaperedST1=Semi-Tapered (One End Only) Semi-Cylindrical Tapered Anodes Cut Coating Away to AttachBonding Pigtail or Tab " (Typ.) TypeWeldedCut Coating Away to AttachBonding Pigtail or TabHMWPE Insulated Pigtail Welded to Core9 Gauge Rod Welded to Core" (Typ.) Welded to CoreWelded to Core A- A Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM ZincBracelet Anodes Bracelet I.D.TYPE *THICKNESSLENGTHGAPNET WT.GROSS WT. inmminmminmminmm lbskglbskg 6 5/8168CC1 1/23814 1/236837610748.511150.3 6 7/8175IT1 1/23819 1/249525116173.016574.8 8 5/8219CC1 1/2388 1/22162517835.48136.7 8 5/8219CC1 3/44416 1/44131 1/238229103.9234106.1 8 7/8225IT1 1/23816 1/241925116474.416876.20 10 3/4273CC1 3/44418 1/44642 1/264270122.5279126.6 10 3/4273CC1 3/44422559251304137.9316143.3 10 3/4273CC25117 3/8441251312141.5321145.6 10 3/4273CC25121 3/45532 1/264354160.6364165.1 11279IT1 1/23819 1/2495251253114.8259117.5 12305CC1 1/23816 3/8416251234106.1244110.7 12305CC25111 3/4299251234106.1244110.7 12 3/4324CC1 1/8291640625117780.3190106.1 12 3/4324CC1 1/4321640625119287.119889.8 12 3/4324CC1 1/82921 1/25461 1/238250113.4264119.8 12 3/4324CC1 1/23818.9480251291132.0304137.9 12 3/4324CC1 3/44418 1/2470376338153.3351159.2 12 3/4324CC1 1/23826 5/8676376387175.5400181.4 13330IT1 1/23816 1/2419251237107.5242109.8 14356CC1 1/43216 3/4426251239108.4247112.0 14356CC25121533376406184.2473214.6 16406CC1 1/4321230525117478.918985.7 16406CC12521533251270122.5286129.7 16406CC12524 3/46291 1/238333151.0349158.3 16406CC1 1/23817 1/2445251333151.0349158.3 16406CC1 1/432256351 1/238403182.8419190.1 16406CC1 3/44418 1/2470376411186.4422191.4 16406CC1 1/23821 3/4553251437196.2453205.5 16406CC2 1/26413.4340376442200.5458207.7 18456CC1 5/84117 3/164374 3/8111359162.8376170.6 18457CC2 1/26412 1/2318376468212.3485220.0 18457CC1 3/44419 1/24952 1/264489221.8506229.5 18457CC1 3/44418.9480251489221.8506229.5 18457RT2 3/47024 7/86324 3/8111562254.9579229.5 18457CC1 3/44427 5/8702376684310.3701318.0 18457CC25121 1/45402 1/264619280.8637288.9 20508CC1 3/4448 1/22163 3/49519588.5205114.5 20508CC1 3/4449 1/2241251260117.9279126.6 20508CC1 3/44410 1/4260251289131.1308139.7 20508CC1 1/23816 1/2419376372168.7390176.9 20508CC1 5/841164062 1/264408185.1426192.2 20508CC2 1/26410254251416188.7434196.9 20508CC1 7/84814 1/4362376419190.1437198.2 20508CC2 1/45712 3/43242 1/264447202.8465210.9 Nominal weights and dimensions ISO 9001DNV Certification, Inc.REGISTERED FIRM 20508CC1.94816 1/4413376492223.2510231.3 20508CC1 5/84121 1/45402 1/26.4494224.1513232.7 20508CC2 1/264143562 1/264536243.1555251.8 20508CC1 3/44419 3/45022 1/264544246.8563255.4 20508CC25128 5/8727376915415.0933423.2 24610CC1 1/43213330251302137.0325147.4 24610CC1 3/44411 1/8283376367166.5390176.9 24610CC1 3/44414 1/8359376460208.7483219.1 24610CC2 3/4448 3/4222376460208.7472214.1 24610CC3 3/49561523 1/289460208.7472214.1 24610CC1 1/238174322 1/264484219.5507230.0 24610CC2 1/85411 1/42862 1/264489221.8512232.2 24610CC25113.13332 1/264502227.7524237.7 24610CC2 1/26410 7/8276376520235.9543246.3 24610CC1 3/44418 1/2470376606274.9629285.3 24610CC25116406376606274.9629285.3 24610CC3 1/879102542 1/264624283.0647293.5 24610CC37610 5/8270376624283.0647293.5 24610CC25117432376660299.4683310.0 24610CC3 1/87910 3/4273251689312.5712323.0 24610CC1 7/1636.528 3/473037677503515.4798362.0 24610CC25119.6498376746338.4769348.8 24610CC1 3/44424 1/4616376819371.5842381.9 24610CC25135 3/49083761342608.71365619.2 24610CC2 3/86033 1/48453761547701.71570712.2 25635CCB3 1/2894 1/2114251320145.2¥¥ 25635CCB4 1/21145127251486220.4¥¥ 26635CC1 9/164121 11/165515127655297.1679308.0 30762CC25110254376468212.3493223.6 30762CC2 3/4708 1/2216376564255.8580263.1 30762CC2 1/45710 3/42734102572259.5601272.6 30762CC25112 1/2318376606274.9631286.2 30762CC2 1/26413.50340376806365.6831376.9 30762CC2 1/45715 1/2394376840381.0865392.4 36914CC25115 1/4387376889403.3924419.1 36914CC2 1/45715 1/8384376996451.81031467.7 36914CC37612.632041021092495.31127571.2 36914CC37636 3/493437632861490.533371513.7 401016CC3 1/48328 3/4730410230371377.630931403.0 401016CC4 1/410821 5/8549410230651390.331211415.7IT= Internally Tapered BraceletTR= Reversely Tapered BraceletCCB= Square Bolt-On Bracelet¥ Variable due to bolt-on assembly Bracelet I.D.TYPE *THICKNESSLENGTHGAPNET WT.GROSS WT. inmminmminmminmm lbskglbskg