ASSEMBLE PET GAZEBO WALLS Begin with two wall panels Place connectorson the bottom of both ends of one panel Please note all conctorsare identicalInsert the second panel into the connector It is ID: 283601
Download Pdf The PPT/PDF document "Pet Gazebo Assembly Instructions" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Pet Gazebo Assembly Instructions ASSEMBLE PET GAZEBO WALLS Begin with two wall panels. Place connectorson the bottom of both ends of one panel. Please note; all conctorsare identical.Insert the second panel into the connector. It is important to have the connectoralready attached to the opposite sideAttach a connectorto join the two panels at the top so the unit can stand freely.Repeat these stepuntil you have an octogonal shape, giving attention to the placement of the door panel and the window panel. Assemble Gazebo Roof Supports Insert roof supportarm into the the support hole in the connector.Repeat step directly across the oppositeside effectively splittingthe octogon in half.Insert roof support armsinto the roof support capRepeat above two steps. Note; its best to insertroof support armsas to make an “x” patternfirstOnce that is done, you may insert the rest of the roof support arms. Attach Kennel Cover to Pet Gazebo. The kennel coveris reversable.The white side tends to reflect heat and sunlight and the brown side tends to absorb it.Pick which side of the kennel coveryou wish and theline up the center of the kennel coverover the roof support cap Pet Gazebo Assembly Instructions Screwtheroof support topper to attach kennel cover to the kennel.Using the ball bands provided attach ennel coverto the posts of the kennel.Note; align ribs of the kennel coverwith the posts of the panels.Your ADVANTEKPet Gazebo is now ready for use! Connecting Multiple Pet GazebosMust have more than onPet GazeboHowever, no EXTRA parts are needed. Only the ones included with each Pet Gazebo. Detacha single wall paneland its connectors, from a fully completed gazebo.Reattach all four connectors so that it turnsthe connecting wall paneloutward rather than inward.To do this, simply rotate the connectors 180Reattach panel so it is facing outward.Attach Gazebos together into the openconnectors. The possible configurations are endless. NOTEFor outdoor use ADVANTEK recommends securing your gazebo to the ground for added stability in inclement weather. ARRANTY All steel and plastic parts (includes; panels, arms and connectors) are covered witha 5 year warranty. All other parts (cover and ball ties) are covered witha 1 year warranty