PPT-TURBO
Author : tatyana-admore | Published Date : 2018-10-24
REBUILD Step 1 Using the small pick or screwdriver walk the tiny snap ring back into the groove on both the compressor and turbine journal bearings to hold them
Presentation Embed Code
Download Presentation
Download Presentation The PPT/PDF document "TURBO" is the property of its rightful owner. Permission is granted to download and print the materials on this website for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
TURBO: Transcript
REBUILD Step 1 Using the small pick or screwdriver walk the tiny snap ring back into the groove on both the compressor and turbine journal bearings to hold them in place Step 2 Install the heat shield first then slide the turbine shaft into the center housing Gently push downward until you feel a clickthis means that the turbine seal has been seated into the center housing DO NOT force the turbine shaft into the housing as you can risk bending the turbine seal and damaging the turbo. Equal amounts of mouse spleen total RNA purified using the RNAqueous Kit were either treated with 7857346U of TURBO DNA free in a 1305734657347L reaction for 2057346min at 3757520C or were left untreated The digestions were stopped by adding 22 5734 To use simply press the Inverter Turbo Defrost P ad and enter the weight of t he food Items that can be defrosted are meat chops ground or roasts poultry whole or pieces and fish or seafood Place meat on a microwave safe rack in an appropriate sized How to build the Mouse Trap Car. Goals & Objectives.
Download Document
Here is the link to download the presentation.
"TURBO"The content belongs to its owner. You may download and print it for personal use, without modification, and keep all copyright notices. By downloading, you agree to these terms.
Related Documents