MultiPDN and MultiAux Configuration in eHRPD Agenda Config Nodal Config Node Message Flow and pcap Introduction PDN connections setup Main service connectionMain A10 is responsible for creating the default PDN connection aux ID: 764558
Download Presentation The PPT/PDF document "Multi-PDN and Multi-Aux Configuration in" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Multi-PDN and Multi-Aux Configuration in eHRPD
Agenda Config Nodal Config Node Message Flow and pcap
Introduction PDN connections setup: Main service connection(Main A10) is responsible for creating the default PDN connection. aux SoType = 59 is responsible for creating additional PDN connections. If you configure an “Aux SoType = 59” on Landslide GUI, it’s not a real Aux connection, it just represents an addtionational PDN connection. Its corresponding APN indicates which PDN it connects to. If you configure an “Aux SoType = 67” on Landslide GUI, it’s a real Aux Connection. Its corresponding APN indicates which PDN this Aux is related with. If configuring total N PDN connections including main service connection and M real auxiliary service connection, you should set the aux number to N-1+M . In this test case, I take 2 PDN, and 3 real auxiliary for example.
Presupposition In successor pages, we use main for short of main service connection, Aux for short of auxiliary service connection . I just show the difference between Multi-PDN and Multi-Aux with normal eHRPD case. Other parts are configured the same with normal eHRPD case.
Configuration in Nodal
Nodal Test Configuration
Nodal Network Device
Nodal Network Device - Cont The number of LMA Node is the same of number of PDN.
Nodal RP-PPP
Nodal RP-RP-PDN1 We should assign N PDN on the first N connections. The Item in “service instance APN Assignments” is associated with that in “Service Instance Setting”. That is: Main -> P0 Aux-1 -> P1 Aux-2 -> P2 Aux-3 -> P3 Aux-4 -> P4
Nodal RP-RP-PDN2
Nodal RP-RP-Aux1
Nodal RP-RP-Aux2
Nodal RP-RP-Aux3
Configuration in Node
Node Emulator Configuration
Node Network Devices
Node Network Devices - Cont
Node RP-A11
Message Flow for PDN Connection Please refer to section 5.5.4.1.1 of X.S0057-v3 for details.
Each color block represents a connection configured in GUI.