MOGUL HM ISO VG 10 22 32 46 68 100 HYDRAULIC OILS FOR HEAVILY LOADED HYDROSTATIC SYSTEMS Describtion MOGUL HM are the high quality hydraulic oils The base highly refined oils used in ID: 518368
Download Pdf The PPT/PDF document "Technical informations" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Technical informations MOGUL HM ISO VG 10, 22, 32, 46, 68, 100 HYDRAULIC OILS FOR HEAVILY LOADED HYDROSTATIC SYSTEMS Describtion: MOGUL HM are the high quality hydraulic oils. The base, highly refined oils used in this product are produced by means of a special They also contain additives that enhance low-temperature properties and viscosity-temperature dependence. Application: These oils are designed especially for heavily loaded high pressure hydrostatic systems equip-ped with hydro-generators that impo They also can be used in mobile hydraulic sys-tems working in all-season mode in non-protected enviroment, for luricating of loaded circulation systems, gear-type transmissions etc. Another application of this hydraulic oils is „oil mist“ lubricating. The typical applications MOGUL HM 10 – special hydraulic oils designed for systems operated in extremely low temperature conditions MOGUL HM 22 – systems operated in very low temperature conditions ( especially winter ope-rations) MOGUL HM 32 – systéme operated in low tem-perature conditions (especially winter, also all season MOGUL HM 46 – systéme operated in regular conditions (all seasons operations) MOGUL HM 68 - systems operated in high temperature conditions (mainly summer perations) o MOGUL HM 100 - systems operated in extre-mely high temperature conditions, special appli- Classification, specification: ISO 6743/4 HM DIN 51 502 H DIN 51 524 part II HLP DIN 51 517part III CLP Voith – hydrodynamic couplings and industrial retarders (HM 32 a HM 46) Characteristic properties: premium lubrication properties excelent anti-corrosion properties excelent anti-oxidation properties guaran-tees long-term exchange intervals does not have any corrosive effects on elas-tomers (high aniline points ) very good air-separation and de-emulsifying properties excelent hydrolitic stability minimum foamability very good thermal-viscosity excellent shearing stress resistance premium filterability PARAMO, a.s., Perovská 560, 530 06 Pardubice tel.: +420 466 810 111, fax: +420 466 810 328 http: www.paramo.cz , e-mail: paramo@paramo.cz Technical informations Physical and chemical properties Value Parameter Unit HM 10 HM 22 HM 32 Test method Density at 20 °C kg/m 3 850 865 868 EN ISO 12185 Kinematic viscosity at 40 °C mm 2 /s 10 22 32 EN ISO 3104 Viscosity index 115 100 110 ISO 2909 Flash point °C 155 190 200 EN ISO 2592 Pour point °C -45 -42 -36 ISO 3016 Aniline point °C 80 102 103 ASTM D 1401 FZG test, non conforming grade 12 12 12 DIN 51 354 Value Parameter Unit HM 46 HM 68 HM 100 Test method Density at 20 °C kg/m 3 860 867 875 EN ISO 12185 Kinematic viscosity at 40 °C mm 2 /s 46 68 100 EN ISO 3104 Viscosity index 115 110 100 ISO 2909 Flash point °C 225 240 250 EN ISO 2592 Pour point °C -27 -24 -21 ISO 3016 Aniline point °C 115 115 118 ASTM D 1401 FZG test, non conforming grade 12 12 12 DIN 51 354 The values shown in the table are typical of current production. For binding parameters and other information see TN 23-147 PARAMO, a.s. and the respektive Safety Data Sheet. PARAMO, a.s., Perovská 560, 530 06 Pardubice tel.: +420 466 810 111, fax: +420 466 810 328 http: www.paramo.cz , e-mail: paramo@paramo.cz